Dynamite Friction 4514-47025 Disc Brake Kit - Front and Rear
Brake Kit for Chevrolet Bolt, Cruze, and Volt
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4514-47025, is a front and rear disc brake kit built for OE-style service replacement. It combines coated rotors, ceramic brake pads, and matching hardware for a complete brake refresh on select Chevrolet applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install with no oil removal step
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are packaged to simplify brake service by combining rotors, pads, and hardware in one application-specific kit. The GEOSPEC rotor line focuses on corrosion protection and OE-level machining, while the 5000 Advanced pad line is formulated for stable friction performance and consistent pedal feel across everyday driving conditions.
Detailed Description
Part number 4514-47025 is engineered for drivers servicing Chevrolet Bolt EV, Chevrolet Bolt EUV, Chevrolet Cruze, and Chevrolet Volt models listed below. This front and rear brake kit is designed around OE specifications, with rotors machined to tight tolerances and inspected for balance and critical dimensions. The ceramic pad formulation is paired with hardware designed to maintain proper caliper movement and reduce uneven wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Excessive caliper movement caused by aged hardware
- Longer stopping distances related to worn friction material
Installation Notes and Fitment
Compatible With:
- Fits 2022-2023 Chevrolet Bolt EUV, front and rear
- Fits 2022-2023 Chevrolet Bolt EV, front and rear
- Fits 2017-2021 Chevrolet Bolt EV, front and rear
- Fits 2016-2019 Chevrolet Cruze, front and rear; standard brakes with 276mm front rotors
- Fits 2016-2019 Chevrolet Volt, front and rear
Before installation, verify rotor size and brake configuration against the vehicle’s existing setup, especially on 2016-2019 Chevrolet Cruze models with standard 276mm front rotors. Clean all mounting surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation. The dry rotor coating is removed naturally by the brake pads during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is machined, balanced where required, and inspected to confirm OE-spec critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Chevrolet Bolt, Cruze, and Volt
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4514-47025, is a front and rear disc brake kit built for OE-style service replacement. It combines coated rotors, ceramic brake pads, and matching hardware for a complete brake refresh on select Chevrolet applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install with no oil removal step
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are packaged to simplify brake service by combining rotors, pads, and hardware in one application-specific kit. The GEOSPEC rotor line focuses on corrosion protection and OE-level machining, while the 5000 Advanced pad line is formulated for stable friction performance and consistent pedal feel across everyday driving conditions.
Detailed Description
Part number 4514-47025 is engineered for drivers servicing Chevrolet Bolt EV, Chevrolet Bolt EUV, Chevrolet Cruze, and Chevrolet Volt models listed below. This front and rear brake kit is designed around OE specifications, with rotors machined to tight tolerances and inspected for balance and critical dimensions. The ceramic pad formulation is paired with hardware designed to maintain proper caliper movement and reduce uneven wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Excessive caliper movement caused by aged hardware
- Longer stopping distances related to worn friction material
Installation Notes and Fitment
Compatible With:
- Fits 2022-2023 Chevrolet Bolt EUV, front and rear
- Fits 2022-2023 Chevrolet Bolt EV, front and rear
- Fits 2017-2021 Chevrolet Bolt EV, front and rear
- Fits 2016-2019 Chevrolet Cruze, front and rear; standard brakes with 276mm front rotors
- Fits 2016-2019 Chevrolet Volt, front and rear
Before installation, verify rotor size and brake configuration against the vehicle’s existing setup, especially on 2016-2019 Chevrolet Cruze models with standard 276mm front rotors. Clean all mounting surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation. The dry rotor coating is removed naturally by the brake pads during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is machined, balanced where required, and inspected to confirm OE-spec critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Chevrolet Bolt, Cruze, and Volt
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4514-47025, is a front and rear disc brake kit built for OE-style service replacement. It combines coated rotors, ceramic brake pads, and matching hardware for a complete brake refresh on select Chevrolet applications.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install with no oil removal step
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are packaged to simplify brake service by combining rotors, pads, and hardware in one application-specific kit. The GEOSPEC rotor line focuses on corrosion protection and OE-level machining, while the 5000 Advanced pad line is formulated for stable friction performance and consistent pedal feel across everyday driving conditions.
Detailed Description
Part number 4514-47025 is engineered for drivers servicing Chevrolet Bolt EV, Chevrolet Bolt EUV, Chevrolet Cruze, and Chevrolet Volt models listed below. This front and rear brake kit is designed around OE specifications, with rotors machined to tight tolerances and inspected for balance and critical dimensions. The ceramic pad formulation is paired with hardware designed to maintain proper caliper movement and reduce uneven wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or out-of-spec rotors
- Excessive caliper movement caused by aged hardware
- Longer stopping distances related to worn friction material
Installation Notes and Fitment
Compatible With:
- Fits 2022-2023 Chevrolet Bolt EUV, front and rear
- Fits 2022-2023 Chevrolet Bolt EV, front and rear
- Fits 2017-2021 Chevrolet Bolt EV, front and rear
- Fits 2016-2019 Chevrolet Cruze, front and rear; standard brakes with 276mm front rotors
- Fits 2016-2019 Chevrolet Volt, front and rear
Before installation, verify rotor size and brake configuration against the vehicle’s existing setup, especially on 2016-2019 Chevrolet Cruze models with standard 276mm front rotors. Clean all mounting surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation. The dry rotor coating is removed naturally by the brake pads during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is machined, balanced where required, and inspected to confirm OE-spec critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
