Dynamite Friction 4514-47016 Disc Brake Kit - Front and Rear
Brake Kit for Buick and Pontiac
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service kit for select 2005 Buick and Pontiac applications. Part number 4514-47016 combines coated rotors, ceramic pads, and matched hardware in one package for a cleaner brake service.
Compatible With 2005 Buick LeSabre, front and rear; 2005 Buick Park Avenue, front and rear; and 2005 Pontiac Bonneville, front and rear. This kit is built for drivers looking for an OE-style brake replacement with corrosion protection and consistent pedal response.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- DFC 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother stops and more even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-47016 for easy catalog matching
Product Details
DFC GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron and processed dry so they are ready to install without oil removal or extra prep. The vented rotors are balanced and inspected to meet OE specifications, and the coated surface is designed to be swept away by the pad friction during normal braking. The 5000 Advanced pads are formulated for axle-specific fitment and are assembled with shims that help reduce brake noise and harshness. Part number 4514-47016 is a practical choice for a front and rear brake refresh on the 2005 Buick LeSabre, 2005 Buick Park Avenue, or 2005 Pontiac Bonneville.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Verify wheel clearance before ordering; the 2005 Buick LeSabre listing notes 16 inch wheels. Inspect calipers, slides, and mounting points before assembly, and replace any worn components outside the kit as needed. Clean the hub surface thoroughly, torque fasteners to factory specifications, and follow a proper pad bed-in procedure after installation. Part number 4514-47016 is intended for front and rear service on the listed vehicles.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and scorched for stable friction performance, while the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for Buick and Pontiac
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service kit for select 2005 Buick and Pontiac applications. Part number 4514-47016 combines coated rotors, ceramic pads, and matched hardware in one package for a cleaner brake service.
Compatible With 2005 Buick LeSabre, front and rear; 2005 Buick Park Avenue, front and rear; and 2005 Pontiac Bonneville, front and rear. This kit is built for drivers looking for an OE-style brake replacement with corrosion protection and consistent pedal response.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- DFC 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother stops and more even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-47016 for easy catalog matching
Product Details
DFC GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron and processed dry so they are ready to install without oil removal or extra prep. The vented rotors are balanced and inspected to meet OE specifications, and the coated surface is designed to be swept away by the pad friction during normal braking. The 5000 Advanced pads are formulated for axle-specific fitment and are assembled with shims that help reduce brake noise and harshness. Part number 4514-47016 is a practical choice for a front and rear brake refresh on the 2005 Buick LeSabre, 2005 Buick Park Avenue, or 2005 Pontiac Bonneville.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Verify wheel clearance before ordering; the 2005 Buick LeSabre listing notes 16 inch wheels. Inspect calipers, slides, and mounting points before assembly, and replace any worn components outside the kit as needed. Clean the hub surface thoroughly, torque fasteners to factory specifications, and follow a proper pad bed-in procedure after installation. Part number 4514-47016 is intended for front and rear service on the listed vehicles.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and scorched for stable friction performance, while the hardware kit is engineered to OE-style form, fit, and function.
Description
Brake Kit for Buick and Pontiac
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service kit for select 2005 Buick and Pontiac applications. Part number 4514-47016 combines coated rotors, ceramic pads, and matched hardware in one package for a cleaner brake service.
Compatible With 2005 Buick LeSabre, front and rear; 2005 Buick Park Avenue, front and rear; and 2005 Pontiac Bonneville, front and rear. This kit is built for drivers looking for an OE-style brake replacement with corrosion protection and consistent pedal response.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- DFC 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother stops and more even pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-47016 for easy catalog matching
Product Details
DFC GEOSPEC rotors are machined to tight tolerances from G3000/G11H18 cast iron and processed dry so they are ready to install without oil removal or extra prep. The vented rotors are balanced and inspected to meet OE specifications, and the coated surface is designed to be swept away by the pad friction during normal braking. The 5000 Advanced pads are formulated for axle-specific fitment and are assembled with shims that help reduce brake noise and harshness. Part number 4514-47016 is a practical choice for a front and rear brake refresh on the 2005 Buick LeSabre, 2005 Buick Park Avenue, or 2005 Pontiac Bonneville.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Verify wheel clearance before ordering; the 2005 Buick LeSabre listing notes 16 inch wheels. Inspect calipers, slides, and mounting points before assembly, and replace any worn components outside the kit as needed. Clean the hub surface thoroughly, torque fasteners to factory specifications, and follow a proper pad bed-in procedure after installation. Part number 4514-47016 is intended for front and rear service on the listed vehicles.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and scorched for stable friction performance, while the hardware kit is engineered to OE-style form, fit, and function.
