Dynamite Friction 4514-47012 Disc Brake Kit - Front and Rear
Brake Kit for Pontiac G5 Front and Rear
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 2009-2010 Pontiac G5 front and rear service on 5 lug wheel applications. Part number 4514-47012 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2009-2010 Pontiac G5, front and rear, 5 lug wheels
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for NVH control
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with non-directional finish
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-47012
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent stopping response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended bedding. DFC GeoSpec rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes while remaining ready for installation without extra prep. The included hardware is engineered to restore proper caliper movement and spring tension during brake service. This part number 4514-47012 is a direct service solution for Pontiac G5 brake maintenance.
Common Brake Issues Addressed
- Brake noise during stops
- Uneven or premature pad wear
- Rust buildup on rotor surfaces
- Reduced braking smoothness after worn hardware
- Longer pedal response from aged brake components
Installation Notes
Compatible With 2009-2010 Pontiac G5 front and rear brake service on 5 lug wheel vehicles. Inspect calipers, slides, and brake fluid condition before installation. Clean hub surfaces thoroughly and follow proper torque procedures during assembly. Bedding-in should be performed according to standard brake service practice to help the pads and rotors seat evenly. Part number 4514-47012 is intended for axle-level brake replacement where a complete rotor, pad, and hardware refresh is needed.
Quality Assurance
DFC GeoSpec rotors are backed by a 12-month warranty against defects in material and workmanship. Each rotor is 100% inspected after machining, and the brake pads are assembled with premium shims to support consistent fit and finish. Part number 4514-47012 is built to OE-style specifications for the Pontiac G5 application.
Brake Kit for Pontiac G5 Front and Rear
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 2009-2010 Pontiac G5 front and rear service on 5 lug wheel applications. Part number 4514-47012 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2009-2010 Pontiac G5, front and rear, 5 lug wheels
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for NVH control
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with non-directional finish
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-47012
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent stopping response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended bedding. DFC GeoSpec rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes while remaining ready for installation without extra prep. The included hardware is engineered to restore proper caliper movement and spring tension during brake service. This part number 4514-47012 is a direct service solution for Pontiac G5 brake maintenance.
Common Brake Issues Addressed
- Brake noise during stops
- Uneven or premature pad wear
- Rust buildup on rotor surfaces
- Reduced braking smoothness after worn hardware
- Longer pedal response from aged brake components
Installation Notes
Compatible With 2009-2010 Pontiac G5 front and rear brake service on 5 lug wheel vehicles. Inspect calipers, slides, and brake fluid condition before installation. Clean hub surfaces thoroughly and follow proper torque procedures during assembly. Bedding-in should be performed according to standard brake service practice to help the pads and rotors seat evenly. Part number 4514-47012 is intended for axle-level brake replacement where a complete rotor, pad, and hardware refresh is needed.
Quality Assurance
DFC GeoSpec rotors are backed by a 12-month warranty against defects in material and workmanship. Each rotor is 100% inspected after machining, and the brake pads are assembled with premium shims to support consistent fit and finish. Part number 4514-47012 is built to OE-style specifications for the Pontiac G5 application.
Original: $304.10
-65%$304.10
$106.44Description
Brake Kit for Pontiac G5 Front and Rear
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for 2009-2010 Pontiac G5 front and rear service on 5 lug wheel applications. Part number 4514-47012 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2009-2010 Pontiac G5, front and rear, 5 lug wheels
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for NVH control
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with non-directional finish
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-47012
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent stopping response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended bedding. DFC GeoSpec rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The coated rotor surface is designed to resist rust better than conventional paint or zinc finishes while remaining ready for installation without extra prep. The included hardware is engineered to restore proper caliper movement and spring tension during brake service. This part number 4514-47012 is a direct service solution for Pontiac G5 brake maintenance.
Common Brake Issues Addressed
- Brake noise during stops
- Uneven or premature pad wear
- Rust buildup on rotor surfaces
- Reduced braking smoothness after worn hardware
- Longer pedal response from aged brake components
Installation Notes
Compatible With 2009-2010 Pontiac G5 front and rear brake service on 5 lug wheel vehicles. Inspect calipers, slides, and brake fluid condition before installation. Clean hub surfaces thoroughly and follow proper torque procedures during assembly. Bedding-in should be performed according to standard brake service practice to help the pads and rotors seat evenly. Part number 4514-47012 is intended for axle-level brake replacement where a complete rotor, pad, and hardware refresh is needed.
Quality Assurance
DFC GeoSpec rotors are backed by a 12-month warranty against defects in material and workmanship. Each rotor is 100% inspected after machining, and the brake pads are assembled with premium shims to support consistent fit and finish. Part number 4514-47012 is built to OE-style specifications for the Pontiac G5 application.
