Dynamite Friction 4514-47007 Disc Brake Kit - Front and Rear
Brake Kit for Camaro and Firebird
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for 1994-1997 Chevrolet Camaro and 1994-1997 Pontiac Firebird applications. Part number 4514-47007 combines coated rotors, low metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- Fits 1994-1997 Chevrolet Camaro, front and rear
- Fits 1994-1997 Pontiac Firebird, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 4514-47007 is engineered as a service kit for OE-style brake replacement on the Camaro and Firebird platform. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface is shipped dry and ready to install, helping reduce prep time during brake service. The 5000 Advanced pads are formulated for stable friction performance and consistent pedal response, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust on exposed braking surfaces
- Reduced stopping consistency from aged friction material
- Longer brake service time due to uncoated rotors
Installation Notes
Before installation, confirm rotor size, caliper condition, and vehicle-specific brake configuration for your Camaro or Firebird. Clean the hub mounting surface, inspect caliper slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. The coated rotor surface is designed to be used as installed; the friction material will remove the coating from the swept area during normal operation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical specifications, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Camaro and Firebird
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for 1994-1997 Chevrolet Camaro and 1994-1997 Pontiac Firebird applications. Part number 4514-47007 combines coated rotors, low metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- Fits 1994-1997 Chevrolet Camaro, front and rear
- Fits 1994-1997 Pontiac Firebird, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 4514-47007 is engineered as a service kit for OE-style brake replacement on the Camaro and Firebird platform. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface is shipped dry and ready to install, helping reduce prep time during brake service. The 5000 Advanced pads are formulated for stable friction performance and consistent pedal response, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust on exposed braking surfaces
- Reduced stopping consistency from aged friction material
- Longer brake service time due to uncoated rotors
Installation Notes
Before installation, confirm rotor size, caliper condition, and vehicle-specific brake configuration for your Camaro or Firebird. Clean the hub mounting surface, inspect caliper slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. The coated rotor surface is designed to be used as installed; the friction material will remove the coating from the swept area during normal operation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical specifications, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $338.45
-65%$338.45
$118.46Description
Brake Kit for Camaro and Firebird
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for 1994-1997 Chevrolet Camaro and 1994-1997 Pontiac Firebird applications. Part number 4514-47007 combines coated rotors, low metallic pads, and brake hardware in one service package for a complete brake refresh.
Key Features
- Fits 1994-1997 Chevrolet Camaro, front and rear
- Fits 1994-1997 Pontiac Firebird, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 4514-47007 is engineered as a service kit for OE-style brake replacement on the Camaro and Firebird platform. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface is shipped dry and ready to install, helping reduce prep time during brake service. The 5000 Advanced pads are formulated for stable friction performance and consistent pedal response, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust on exposed braking surfaces
- Reduced stopping consistency from aged friction material
- Longer brake service time due to uncoated rotors
Installation Notes
Before installation, confirm rotor size, caliper condition, and vehicle-specific brake configuration for your Camaro or Firebird. Clean the hub mounting surface, inspect caliper slides, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. The coated rotor surface is designed to be used as installed; the friction material will remove the coating from the swept area during normal operation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical specifications, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
