Dynamite Friction 4514-46044 Disc Brake Kit - Front and Rear
Brake Kit for Buick Lucerne and Cadillac DTS
DFC Friction part 4514-46044 is a complete disc brake kit built for front and rear service on select Buick Lucerne and Cadillac DTS applications. It combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and brake hardware in one package for a streamlined brake repair.
Compatible With 2006-2011 Buick Lucerne and 2006-2011 Cadillac DTS, this kit is aimed at drivers looking for OE-style fitment, corrosion-resistant rotor surfaces, and stable pad performance. The part number 4514-46044 is a direct reference for shoppers comparing brake service kits for these vehicles.
Key Features
- Disc brake kit with rotors, ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured and scorched friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- OE-spec cast iron rotor construction and tight machining tolerances
- Part number: 4514-46044
Product Line Details
The DFC GEOSPEC rotor line is designed to arrive dry and ready to install, eliminating the need to clean off oil before assembly. The coated surface helps resist rust better than conventional paint or zinc finishes, while the machined rotor face is prepared for even pad contact. The 5000 Advanced pad line is formulated for stable friction performance and reduced initial break-in, making it a practical choice for daily-driven Buick Lucerne and Cadillac DTS brake service.
Detailed Description
This brake service kit is engineered for front and rear brake replacement on 2006-2011 Buick Lucerne and 2006-2011 Cadillac DTS models. DFC rotors are manufactured to G3000/G11H18 cast iron specifications, then machined to OE-level tolerances and inspected for critical dimensions and balance. The pads are post-cured for consistent friction behavior and assembled with shims to help reduce brake noise. If you are searching for a 2006-2011 Buick Lucerne front and rear brake kit or a 2006-2011 Cadillac DTS disc brake kit, 4514-46044 is the catalog number to use.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping consistency from aged friction material
- Rotor rust buildup on exposed braking surfaces
- Vibration or harshness during normal braking
Installation Notes and Tips
Before installation, inspect calipers, slides, and brake fluid condition so the new components can perform as intended. The coated rotors are shipped dry and ready to install, and the coating is removed naturally by the pad friction during normal use. Follow proper bedding procedures after installation to help promote even pad transfer and smooth braking.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes, and vented rotors are checked for balance and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Buick Lucerne and Cadillac DTS
DFC Friction part 4514-46044 is a complete disc brake kit built for front and rear service on select Buick Lucerne and Cadillac DTS applications. It combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and brake hardware in one package for a streamlined brake repair.
Compatible With 2006-2011 Buick Lucerne and 2006-2011 Cadillac DTS, this kit is aimed at drivers looking for OE-style fitment, corrosion-resistant rotor surfaces, and stable pad performance. The part number 4514-46044 is a direct reference for shoppers comparing brake service kits for these vehicles.
Key Features
- Disc brake kit with rotors, ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured and scorched friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- OE-spec cast iron rotor construction and tight machining tolerances
- Part number: 4514-46044
Product Line Details
The DFC GEOSPEC rotor line is designed to arrive dry and ready to install, eliminating the need to clean off oil before assembly. The coated surface helps resist rust better than conventional paint or zinc finishes, while the machined rotor face is prepared for even pad contact. The 5000 Advanced pad line is formulated for stable friction performance and reduced initial break-in, making it a practical choice for daily-driven Buick Lucerne and Cadillac DTS brake service.
Detailed Description
This brake service kit is engineered for front and rear brake replacement on 2006-2011 Buick Lucerne and 2006-2011 Cadillac DTS models. DFC rotors are manufactured to G3000/G11H18 cast iron specifications, then machined to OE-level tolerances and inspected for critical dimensions and balance. The pads are post-cured for consistent friction behavior and assembled with shims to help reduce brake noise. If you are searching for a 2006-2011 Buick Lucerne front and rear brake kit or a 2006-2011 Cadillac DTS disc brake kit, 4514-46044 is the catalog number to use.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping consistency from aged friction material
- Rotor rust buildup on exposed braking surfaces
- Vibration or harshness during normal braking
Installation Notes and Tips
Before installation, inspect calipers, slides, and brake fluid condition so the new components can perform as intended. The coated rotors are shipped dry and ready to install, and the coating is removed naturally by the pad friction during normal use. Follow proper bedding procedures after installation to help promote even pad transfer and smooth braking.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes, and vented rotors are checked for balance and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $390.11
-65%$390.11
$136.54Description
Brake Kit for Buick Lucerne and Cadillac DTS
DFC Friction part 4514-46044 is a complete disc brake kit built for front and rear service on select Buick Lucerne and Cadillac DTS applications. It combines DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and brake hardware in one package for a streamlined brake repair.
Compatible With 2006-2011 Buick Lucerne and 2006-2011 Cadillac DTS, this kit is aimed at drivers looking for OE-style fitment, corrosion-resistant rotor surfaces, and stable pad performance. The part number 4514-46044 is a direct reference for shoppers comparing brake service kits for these vehicles.
Key Features
- Disc brake kit with rotors, ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced brake pads with post-cured and scorched friction material
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- OE-spec cast iron rotor construction and tight machining tolerances
- Part number: 4514-46044
Product Line Details
The DFC GEOSPEC rotor line is designed to arrive dry and ready to install, eliminating the need to clean off oil before assembly. The coated surface helps resist rust better than conventional paint or zinc finishes, while the machined rotor face is prepared for even pad contact. The 5000 Advanced pad line is formulated for stable friction performance and reduced initial break-in, making it a practical choice for daily-driven Buick Lucerne and Cadillac DTS brake service.
Detailed Description
This brake service kit is engineered for front and rear brake replacement on 2006-2011 Buick Lucerne and 2006-2011 Cadillac DTS models. DFC rotors are manufactured to G3000/G11H18 cast iron specifications, then machined to OE-level tolerances and inspected for critical dimensions and balance. The pads are post-cured for consistent friction behavior and assembled with shims to help reduce brake noise. If you are searching for a 2006-2011 Buick Lucerne front and rear brake kit or a 2006-2011 Cadillac DTS disc brake kit, 4514-46044 is the catalog number to use.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping consistency from aged friction material
- Rotor rust buildup on exposed braking surfaces
- Vibration or harshness during normal braking
Installation Notes and Tips
Before installation, inspect calipers, slides, and brake fluid condition so the new components can perform as intended. The coated rotors are shipped dry and ready to install, and the coating is removed naturally by the pad friction during normal use. Follow proper bedding procedures after installation to help promote even pad transfer and smooth braking.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes, and vented rotors are checked for balance and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
