Dynamite Friction 4514-46040 Disc Brake Kit - Front and Rear
Brake Kit for 2003-2007 Cadillac CTS
Restore braking performance on your Cadillac CTS with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit, part number 4514-46040. This front and rear brake kit is built for 2003-2007 Cadillac CTS models with standard suspension and combines coated rotors, ceramic pads, and brake hardware in one service package.
Key Features
- Fits 2003-2007 Cadillac CTS, front and rear, standard suspension
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC 4514-46040 brake kit is engineered for drivers who want a complete brake service solution for the Cadillac CTS. The coated rotors are machined to tight tolerances from G3000/G11H18 cast iron, then inspected for balance and critical dimensions to support OE-style fit, durability, and stability. The ceramic pad formulation is designed for consistent friction performance, while the included hardware is built to address worn or corroded brake hardware that can contribute to uneven wear and noise. This part number, 4514-46040, is a direct fit for the listed Cadillac CTS applications and is a practical choice for a full front and rear brake refresh.
DFC’s GEOSPEC rotor line focuses on corrosion resistance and installation efficiency, while the 5000 Advanced pad line emphasizes stable friction and reduced NVH. Together, they create a service kit suited for everyday driving on the Cadillac CTS, with components selected to work as a matched set.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust and surface corrosion
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Compatible With 2003-2007 Cadillac CTS, front and rear, standard suspension. Inspect calipers, slides, and brake hoses before installation, and clean the hub mounting surface to help prevent rotor runout. The rotors are shipped dry and ready to install, so no oil removal is required. Follow proper bedding procedures after installation to help the pads and rotors seat evenly. Part number 4514-46040 should be verified against the vehicle’s suspension configuration before ordering.
Quality Assurance
DFC GEOSPEC coated rotors are backed by a 12-month warranty against defects in material and workmanship. Each rotor is inspected for critical dimensions, and vented rotors are balance-corrected when needed. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is designed with OE-style form, fit, and function in mind.
Brake Kit for 2003-2007 Cadillac CTS
Restore braking performance on your Cadillac CTS with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit, part number 4514-46040. This front and rear brake kit is built for 2003-2007 Cadillac CTS models with standard suspension and combines coated rotors, ceramic pads, and brake hardware in one service package.
Key Features
- Fits 2003-2007 Cadillac CTS, front and rear, standard suspension
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC 4514-46040 brake kit is engineered for drivers who want a complete brake service solution for the Cadillac CTS. The coated rotors are machined to tight tolerances from G3000/G11H18 cast iron, then inspected for balance and critical dimensions to support OE-style fit, durability, and stability. The ceramic pad formulation is designed for consistent friction performance, while the included hardware is built to address worn or corroded brake hardware that can contribute to uneven wear and noise. This part number, 4514-46040, is a direct fit for the listed Cadillac CTS applications and is a practical choice for a full front and rear brake refresh.
DFC’s GEOSPEC rotor line focuses on corrosion resistance and installation efficiency, while the 5000 Advanced pad line emphasizes stable friction and reduced NVH. Together, they create a service kit suited for everyday driving on the Cadillac CTS, with components selected to work as a matched set.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust and surface corrosion
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Compatible With 2003-2007 Cadillac CTS, front and rear, standard suspension. Inspect calipers, slides, and brake hoses before installation, and clean the hub mounting surface to help prevent rotor runout. The rotors are shipped dry and ready to install, so no oil removal is required. Follow proper bedding procedures after installation to help the pads and rotors seat evenly. Part number 4514-46040 should be verified against the vehicle’s suspension configuration before ordering.
Quality Assurance
DFC GEOSPEC coated rotors are backed by a 12-month warranty against defects in material and workmanship. Each rotor is inspected for critical dimensions, and vented rotors are balance-corrected when needed. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is designed with OE-style form, fit, and function in mind.
Original: $363.30
-65%$363.30
$127.16Description
Brake Kit for 2003-2007 Cadillac CTS
Restore braking performance on your Cadillac CTS with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit, part number 4514-46040. This front and rear brake kit is built for 2003-2007 Cadillac CTS models with standard suspension and combines coated rotors, ceramic pads, and brake hardware in one service package.
Key Features
- Fits 2003-2007 Cadillac CTS, front and rear, standard suspension
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC 4514-46040 brake kit is engineered for drivers who want a complete brake service solution for the Cadillac CTS. The coated rotors are machined to tight tolerances from G3000/G11H18 cast iron, then inspected for balance and critical dimensions to support OE-style fit, durability, and stability. The ceramic pad formulation is designed for consistent friction performance, while the included hardware is built to address worn or corroded brake hardware that can contribute to uneven wear and noise. This part number, 4514-46040, is a direct fit for the listed Cadillac CTS applications and is a practical choice for a full front and rear brake refresh.
DFC’s GEOSPEC rotor line focuses on corrosion resistance and installation efficiency, while the 5000 Advanced pad line emphasizes stable friction and reduced NVH. Together, they create a service kit suited for everyday driving on the Cadillac CTS, with components selected to work as a matched set.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust and surface corrosion
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Compatible With 2003-2007 Cadillac CTS, front and rear, standard suspension. Inspect calipers, slides, and brake hoses before installation, and clean the hub mounting surface to help prevent rotor runout. The rotors are shipped dry and ready to install, so no oil removal is required. Follow proper bedding procedures after installation to help the pads and rotors seat evenly. Part number 4514-46040 should be verified against the vehicle’s suspension configuration before ordering.
Quality Assurance
DFC GEOSPEC coated rotors are backed by a 12-month warranty against defects in material and workmanship. Each rotor is inspected for critical dimensions, and vented rotors are balance-corrected when needed. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is designed with OE-style form, fit, and function in mind.
