Dynamite Friction 4514-46038 Disc Brake Kit - Front and Rear
Brake Kit for Corvette and XLR
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit, part number 4514-46038, is a front and rear disc brake kit built for select Chevrolet Corvette and Cadillac XLR applications. It combines coated rotors, semi-metallic pads, and matched brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit included for a complete brake service
- Part number 4514-46038 for easy identification
Product Details
The DFC GEOSPEC rotor design is machined to tight tolerances and built to OE-style G3000/G11H18 cast iron specifications for durability and stable braking performance. Each rotor is processed dry and ready to install, which helps reduce prep time during brake service. The 5000 Advanced pads are formulated for consistent friction, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel to help restore proper caliper movement and reduce noise-related wear.
This part number 4514-46038 is a strong fitment-based choice for drivers searching for a Chevrolet Corvette brake kit, Cadillac XLR front and rear brake kit, or a 2005-2009 Corvette brake rotor and pad service kit. It also suits shoppers looking for a DFC brake kit for Corvette and XLR applications with coated rotors and semi-metallic pads.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from aged friction material
- Rotor rust buildup on exposed braking surfaces
- Longer service time when replacing rotors, pads, and hardware separately
Installation Notes
Fits 2006-2009 Chevrolet Corvette, front and rear, without Heavy Duty Brakes. Fits 2005-2007 Cadillac XLR, front and rear. Fits 2005 Chevrolet Corvette, front and rear, without Z51 Package. Verify brake package details before ordering, since fitment is limited by factory brake configuration. The rotors are shipped dry and ready for installation, and the non-directional finish supports even pad bedding after service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE form, fit, and function.
Brake Kit for Corvette and XLR
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit, part number 4514-46038, is a front and rear disc brake kit built for select Chevrolet Corvette and Cadillac XLR applications. It combines coated rotors, semi-metallic pads, and matched brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit included for a complete brake service
- Part number 4514-46038 for easy identification
Product Details
The DFC GEOSPEC rotor design is machined to tight tolerances and built to OE-style G3000/G11H18 cast iron specifications for durability and stable braking performance. Each rotor is processed dry and ready to install, which helps reduce prep time during brake service. The 5000 Advanced pads are formulated for consistent friction, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel to help restore proper caliper movement and reduce noise-related wear.
This part number 4514-46038 is a strong fitment-based choice for drivers searching for a Chevrolet Corvette brake kit, Cadillac XLR front and rear brake kit, or a 2005-2009 Corvette brake rotor and pad service kit. It also suits shoppers looking for a DFC brake kit for Corvette and XLR applications with coated rotors and semi-metallic pads.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from aged friction material
- Rotor rust buildup on exposed braking surfaces
- Longer service time when replacing rotors, pads, and hardware separately
Installation Notes
Fits 2006-2009 Chevrolet Corvette, front and rear, without Heavy Duty Brakes. Fits 2005-2007 Cadillac XLR, front and rear. Fits 2005 Chevrolet Corvette, front and rear, without Z51 Package. Verify brake package details before ordering, since fitment is limited by factory brake configuration. The rotors are shipped dry and ready for installation, and the non-directional finish supports even pad bedding after service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE form, fit, and function.
Original: $366.13
-65%$366.13
$128.15Description
Brake Kit for Corvette and XLR
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit, part number 4514-46038, is a front and rear disc brake kit built for select Chevrolet Corvette and Cadillac XLR applications. It combines coated rotors, semi-metallic pads, and matched brake hardware in one service package for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit included for a complete brake service
- Part number 4514-46038 for easy identification
Product Details
The DFC GEOSPEC rotor design is machined to tight tolerances and built to OE-style G3000/G11H18 cast iron specifications for durability and stable braking performance. Each rotor is processed dry and ready to install, which helps reduce prep time during brake service. The 5000 Advanced pads are formulated for consistent friction, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel to help restore proper caliper movement and reduce noise-related wear.
This part number 4514-46038 is a strong fitment-based choice for drivers searching for a Chevrolet Corvette brake kit, Cadillac XLR front and rear brake kit, or a 2005-2009 Corvette brake rotor and pad service kit. It also suits shoppers looking for a DFC brake kit for Corvette and XLR applications with coated rotors and semi-metallic pads.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from aged friction material
- Rotor rust buildup on exposed braking surfaces
- Longer service time when replacing rotors, pads, and hardware separately
Installation Notes
Fits 2006-2009 Chevrolet Corvette, front and rear, without Heavy Duty Brakes. Fits 2005-2007 Cadillac XLR, front and rear. Fits 2005 Chevrolet Corvette, front and rear, without Z51 Package. Verify brake package details before ordering, since fitment is limited by factory brake configuration. The rotors are shipped dry and ready for installation, and the non-directional finish supports even pad bedding after service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE form, fit, and function.
