Dynamite Friction 4514-46035 Disc Brake Kit - Front and Rear
Brake Kit for 2010 Corvette
Built for the front and rear brake service on the 2010 Chevrolet Corvette without Heavy Duty Brakes, this DFC brake kit combines coated rotors, 5000 Advanced semi-metallic pads, and matching hardware for a complete brake refresh. Part number 4514-46035 is designed for drivers looking for OE-style fitment, corrosion protection, and consistent stopping performance.
Key Features
- Fits 2010 Chevrolet Corvette, front and rear, without Heavy Duty Brakes
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- Rotor castings machined to tight tolerances with a non-directional finish
- Part number 4514-46035
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a service kit built around OE-style braking requirements for the 2010 Chevrolet Corvette. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Their coated surface is intended to resist rust better than conventional paint or zinc finishes, while the non-directional machining finish supports smoother pad bedding and quieter operation. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and harshness. Part number 4514-46035 is a direct-fit brake service solution for front and rear replacement on the listed Corvette application.
DFC’s brake pad and hardware programs are developed with OE-style form, fit, and function in mind. For this application, the kit brings together the friction material, rotor finish, and hardware components needed for a complete brake job on the 2010 Chevrolet Corvette.
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated rotors that require cleaning
Installation Notes
Compatible With 2010 Chevrolet Corvette, front and rear, without Heavy Duty Brakes. Verify rotor size, brake package, and axle configuration before installation. Clean all mating surfaces, inspect caliper condition, and follow the vehicle manufacturer’s brake service procedure. The coated rotor surface is designed to be installed dry and the coating will wear away in the pad sweep area during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed through electronic mill balancing. The rotors are manufactured to OE specifications and include a 12-month warranty against defects in material and workmanship. Part number 4514-46035 is built to deliver consistent results for the 2010 Chevrolet Corvette brake service.
Brake Kit for 2010 Corvette
Built for the front and rear brake service on the 2010 Chevrolet Corvette without Heavy Duty Brakes, this DFC brake kit combines coated rotors, 5000 Advanced semi-metallic pads, and matching hardware for a complete brake refresh. Part number 4514-46035 is designed for drivers looking for OE-style fitment, corrosion protection, and consistent stopping performance.
Key Features
- Fits 2010 Chevrolet Corvette, front and rear, without Heavy Duty Brakes
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- Rotor castings machined to tight tolerances with a non-directional finish
- Part number 4514-46035
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a service kit built around OE-style braking requirements for the 2010 Chevrolet Corvette. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Their coated surface is intended to resist rust better than conventional paint or zinc finishes, while the non-directional machining finish supports smoother pad bedding and quieter operation. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and harshness. Part number 4514-46035 is a direct-fit brake service solution for front and rear replacement on the listed Corvette application.
DFC’s brake pad and hardware programs are developed with OE-style form, fit, and function in mind. For this application, the kit brings together the friction material, rotor finish, and hardware components needed for a complete brake job on the 2010 Chevrolet Corvette.
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated rotors that require cleaning
Installation Notes
Compatible With 2010 Chevrolet Corvette, front and rear, without Heavy Duty Brakes. Verify rotor size, brake package, and axle configuration before installation. Clean all mating surfaces, inspect caliper condition, and follow the vehicle manufacturer’s brake service procedure. The coated rotor surface is designed to be installed dry and the coating will wear away in the pad sweep area during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed through electronic mill balancing. The rotors are manufactured to OE specifications and include a 12-month warranty against defects in material and workmanship. Part number 4514-46035 is built to deliver consistent results for the 2010 Chevrolet Corvette brake service.
Original: $369.53
-65%$369.53
$129.34Description
Brake Kit for 2010 Corvette
Built for the front and rear brake service on the 2010 Chevrolet Corvette without Heavy Duty Brakes, this DFC brake kit combines coated rotors, 5000 Advanced semi-metallic pads, and matching hardware for a complete brake refresh. Part number 4514-46035 is designed for drivers looking for OE-style fitment, corrosion protection, and consistent stopping performance.
Key Features
- Fits 2010 Chevrolet Corvette, front and rear, without Heavy Duty Brakes
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- Rotor castings machined to tight tolerances with a non-directional finish
- Part number 4514-46035
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a service kit built around OE-style braking requirements for the 2010 Chevrolet Corvette. The rotors are processed dry and ready to install, which helps reduce prep time during brake service. Their coated surface is intended to resist rust better than conventional paint or zinc finishes, while the non-directional machining finish supports smoother pad bedding and quieter operation. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and harshness. Part number 4514-46035 is a direct-fit brake service solution for front and rear replacement on the listed Corvette application.
DFC’s brake pad and hardware programs are developed with OE-style form, fit, and function in mind. For this application, the kit brings together the friction material, rotor finish, and hardware components needed for a complete brake job on the 2010 Chevrolet Corvette.
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by uncoated rotors that require cleaning
Installation Notes
Compatible With 2010 Chevrolet Corvette, front and rear, without Heavy Duty Brakes. Verify rotor size, brake package, and axle configuration before installation. Clean all mating surfaces, inspect caliper condition, and follow the vehicle manufacturer’s brake service procedure. The coated rotor surface is designed to be installed dry and the coating will wear away in the pad sweep area during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed through electronic mill balancing. The rotors are manufactured to OE specifications and include a 12-month warranty against defects in material and workmanship. Part number 4514-46035 is built to deliver consistent results for the 2010 Chevrolet Corvette brake service.
