Dynamite Friction 4514-46011 Disc Brake Kit - Front and Rear
Brake Kit for Cadillac CTS and STS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for select Cadillac applications. Part number 4514-46011 combines coated rotors, low metallic pads, and brake hardware for front and rear service on the listed vehicles.
Key Features
- Complete disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-style rotor machining and inspection for dimensional consistency
- Part number 4514-46011 for easy catalog matching
Product Details
DFC’s 5000 Advanced pad formulation is built around stable friction performance and consistent pedal feel. The pads are post-cured, then scorched to remove uncured bonding agents, which helps reduce the initial bedding period. On the rotor side, the GeoSpec coating is applied to help resist rust while allowing the friction surface to cleanly sweep the coating away during use. Each rotor is machined to tight tolerances, finished non-directionally, and inspected for balance and critical dimensions.
This kit is a strong match for drivers searching for a Cadillac CTS brake kit, Cadillac STS front and rear brake replacement, or a DFC 4514-46011 brake service kit for 2004-2007 Cadillac CTS and 2006-2011 Cadillac STS. The hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to address wear at the contact points that can contribute to brake noise and uneven caliper movement.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn friction material
- Reduced stopping performance from aged brake components
- Caliper movement issues caused by corroded or weakened hardware
Installation Notes
Fits 2004-2007 Cadillac CTS, front and rear. Fits 2006-2011 Cadillac STS, front and rear; STS applications note 6-lug wheels and compatibility with drum brake hardware kits. Before installation, confirm rotor size, axle position, and wheel configuration against the vehicle’s original brake setup. Clean the hub mounting surface, inspect calipers and slides, and follow the manufacturer’s bedding procedure after installation.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction performance and NVH control. Part number 4514-46011 is built as a matched service kit for the listed Cadillac CTS and Cadillac STS applications.
Brake Kit for Cadillac CTS and STS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for select Cadillac applications. Part number 4514-46011 combines coated rotors, low metallic pads, and brake hardware for front and rear service on the listed vehicles.
Key Features
- Complete disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-style rotor machining and inspection for dimensional consistency
- Part number 4514-46011 for easy catalog matching
Product Details
DFC’s 5000 Advanced pad formulation is built around stable friction performance and consistent pedal feel. The pads are post-cured, then scorched to remove uncured bonding agents, which helps reduce the initial bedding period. On the rotor side, the GeoSpec coating is applied to help resist rust while allowing the friction surface to cleanly sweep the coating away during use. Each rotor is machined to tight tolerances, finished non-directionally, and inspected for balance and critical dimensions.
This kit is a strong match for drivers searching for a Cadillac CTS brake kit, Cadillac STS front and rear brake replacement, or a DFC 4514-46011 brake service kit for 2004-2007 Cadillac CTS and 2006-2011 Cadillac STS. The hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to address wear at the contact points that can contribute to brake noise and uneven caliper movement.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn friction material
- Reduced stopping performance from aged brake components
- Caliper movement issues caused by corroded or weakened hardware
Installation Notes
Fits 2004-2007 Cadillac CTS, front and rear. Fits 2006-2011 Cadillac STS, front and rear; STS applications note 6-lug wheels and compatibility with drum brake hardware kits. Before installation, confirm rotor size, axle position, and wheel configuration against the vehicle’s original brake setup. Clean the hub mounting surface, inspect calipers and slides, and follow the manufacturer’s bedding procedure after installation.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction performance and NVH control. Part number 4514-46011 is built as a matched service kit for the listed Cadillac CTS and Cadillac STS applications.
Original: $509.33
-65%$509.33
$178.27Description
Brake Kit for Cadillac CTS and STS
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for select Cadillac applications. Part number 4514-46011 combines coated rotors, low metallic pads, and brake hardware for front and rear service on the listed vehicles.
Key Features
- Complete disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-style rotor machining and inspection for dimensional consistency
- Part number 4514-46011 for easy catalog matching
Product Details
DFC’s 5000 Advanced pad formulation is built around stable friction performance and consistent pedal feel. The pads are post-cured, then scorched to remove uncured bonding agents, which helps reduce the initial bedding period. On the rotor side, the GeoSpec coating is applied to help resist rust while allowing the friction surface to cleanly sweep the coating away during use. Each rotor is machined to tight tolerances, finished non-directionally, and inspected for balance and critical dimensions.
This kit is a strong match for drivers searching for a Cadillac CTS brake kit, Cadillac STS front and rear brake replacement, or a DFC 4514-46011 brake service kit for 2004-2007 Cadillac CTS and 2006-2011 Cadillac STS. The hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to address wear at the contact points that can contribute to brake noise and uneven caliper movement.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn friction material
- Reduced stopping performance from aged brake components
- Caliper movement issues caused by corroded or weakened hardware
Installation Notes
Fits 2004-2007 Cadillac CTS, front and rear. Fits 2006-2011 Cadillac STS, front and rear; STS applications note 6-lug wheels and compatibility with drum brake hardware kits. Before installation, confirm rotor size, axle position, and wheel configuration against the vehicle’s original brake setup. Clean the hub mounting surface, inspect calipers and slides, and follow the manufacturer’s bedding procedure after installation.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support stable friction performance and NVH control. Part number 4514-46011 is built as a matched service kit for the listed Cadillac CTS and Cadillac STS applications.
