Dynamite Friction 4514-45030 Disc Brake Kit - Front and Rear
Brake Kit for Buick Lucerne
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for the 2006-2011 Buick Lucerne, front and rear. Part number 4514-45030 combines coated rotors, ceramic brake pads, and matched hardware for a direct brake service on this application.
Key Features
- Fits 2006-2011 Buick Lucerne, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction built to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-45030 for Buick Lucerne brake service
Product Details
DFC’s GEOSPEC rotor line is built for OE-style fit, durability, and stable braking performance. The coated finish helps resist rust better than conventional paint or zinc coatings, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pad formulation is engineered for consistent friction, and the included hardware is designed to restore proper caliper movement and spring tension on worn brake assemblies. This makes 4514-45030 a practical choice for a complete brake job on the Buick Lucerne.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust and surface corrosion on daily-driven vehicles
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes
Use this kit for front and rear brake service on the 2006-2011 Buick Lucerne. The rotors are ready to install without additional prep, and the pad surface is designed to reduce the initial bedding period. Inspect calipers, slides, and brake fluid condition during service to complete the repair correctly. Part number 4514-45030 is intended for a full brake refresh on this vehicle application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for Buick Lucerne
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for the 2006-2011 Buick Lucerne, front and rear. Part number 4514-45030 combines coated rotors, ceramic brake pads, and matched hardware for a direct brake service on this application.
Key Features
- Fits 2006-2011 Buick Lucerne, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction built to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-45030 for Buick Lucerne brake service
Product Details
DFC’s GEOSPEC rotor line is built for OE-style fit, durability, and stable braking performance. The coated finish helps resist rust better than conventional paint or zinc coatings, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pad formulation is engineered for consistent friction, and the included hardware is designed to restore proper caliper movement and spring tension on worn brake assemblies. This makes 4514-45030 a practical choice for a complete brake job on the Buick Lucerne.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust and surface corrosion on daily-driven vehicles
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes
Use this kit for front and rear brake service on the 2006-2011 Buick Lucerne. The rotors are ready to install without additional prep, and the pad surface is designed to reduce the initial bedding period. Inspect calipers, slides, and brake fluid condition during service to complete the repair correctly. Part number 4514-45030 is intended for a full brake refresh on this vehicle application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship.
Original: $375.32
-65%$375.32
$131.36Description
Brake Kit for Buick Lucerne
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for the 2006-2011 Buick Lucerne, front and rear. Part number 4514-45030 combines coated rotors, ceramic brake pads, and matched hardware for a direct brake service on this application.
Key Features
- Fits 2006-2011 Buick Lucerne, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction built to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-45030 for Buick Lucerne brake service
Product Details
DFC’s GEOSPEC rotor line is built for OE-style fit, durability, and stable braking performance. The coated finish helps resist rust better than conventional paint or zinc coatings, while the dry packaging eliminates the need to clean oil from the rotor before installation. The 5000 Advanced pad formulation is engineered for consistent friction, and the included hardware is designed to restore proper caliper movement and spring tension on worn brake assemblies. This makes 4514-45030 a practical choice for a complete brake job on the Buick Lucerne.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust and surface corrosion on daily-driven vehicles
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes
Use this kit for front and rear brake service on the 2006-2011 Buick Lucerne. The rotors are ready to install without additional prep, and the pad surface is designed to reduce the initial bedding period. Inspect calipers, slides, and brake fluid condition during service to complete the repair correctly. Part number 4514-45030 is intended for a full brake refresh on this vehicle application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship.
