Dynamite Friction 4514-45006 Disc Brake Kit - Front and Rear
Brake Kit for 1998-2002 Cadillac Seville
This DFC disc brake kit combines GEOSPEC coated rotors, 5000 Advanced semi-metallic brake pads, and matching hardware for the front and rear of the vehicle. It is built for 1998-2002 Cadillac Seville applications and is designed to support consistent stopping performance, reduced brake noise, and easier rotor installation.
- Compatible with 1998-2002 Cadillac Seville, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Dry-processed rotors ready to install without oil removal
- Non-directional rotor finish for smoother pad bed-in
- Part number 4514-45006
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line uses a coated cast-iron design that resists rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad line is formulated for stable friction performance and uses post-curing, scorching, and premium shims to help deliver quieter operation and more consistent pedal feel. For Cadillac Seville brake service, part number 4514-45006 provides a matched rotor-and-pad package for front and rear maintenance.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear and caliper movement
Installation Notes
Before installation, confirm the vehicle is a 1998-2002 Cadillac Seville and verify front and rear brake service requirements. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The coated rotor surface is dry and ready to install; the coating will wear away naturally in the pad sweep area during normal use. Part number 4514-45006 is intended for direct brake service on the listed application.
Quality Assurance
DFC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical attributes. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion resistance and fitment consistency.
Brake Kit for 1998-2002 Cadillac Seville
This DFC disc brake kit combines GEOSPEC coated rotors, 5000 Advanced semi-metallic brake pads, and matching hardware for the front and rear of the vehicle. It is built for 1998-2002 Cadillac Seville applications and is designed to support consistent stopping performance, reduced brake noise, and easier rotor installation.
- Compatible with 1998-2002 Cadillac Seville, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Dry-processed rotors ready to install without oil removal
- Non-directional rotor finish for smoother pad bed-in
- Part number 4514-45006
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line uses a coated cast-iron design that resists rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad line is formulated for stable friction performance and uses post-curing, scorching, and premium shims to help deliver quieter operation and more consistent pedal feel. For Cadillac Seville brake service, part number 4514-45006 provides a matched rotor-and-pad package for front and rear maintenance.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear and caliper movement
Installation Notes
Before installation, confirm the vehicle is a 1998-2002 Cadillac Seville and verify front and rear brake service requirements. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The coated rotor surface is dry and ready to install; the coating will wear away naturally in the pad sweep area during normal use. Part number 4514-45006 is intended for direct brake service on the listed application.
Quality Assurance
DFC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical attributes. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion resistance and fitment consistency.
Description
Brake Kit for 1998-2002 Cadillac Seville
This DFC disc brake kit combines GEOSPEC coated rotors, 5000 Advanced semi-metallic brake pads, and matching hardware for the front and rear of the vehicle. It is built for 1998-2002 Cadillac Seville applications and is designed to support consistent stopping performance, reduced brake noise, and easier rotor installation.
- Compatible with 1998-2002 Cadillac Seville, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Dry-processed rotors ready to install without oil removal
- Non-directional rotor finish for smoother pad bed-in
- Part number 4514-45006
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line uses a coated cast-iron design that resists rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad line is formulated for stable friction performance and uses post-curing, scorching, and premium shims to help deliver quieter operation and more consistent pedal feel. For Cadillac Seville brake service, part number 4514-45006 provides a matched rotor-and-pad package for front and rear maintenance.
Common Brake Issues This Kit Addresses
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear and caliper movement
Installation Notes
Before installation, confirm the vehicle is a 1998-2002 Cadillac Seville and verify front and rear brake service requirements. Clean the hub mounting surface, inspect calipers and slides, and follow proper bedding procedures after installation. The coated rotor surface is dry and ready to install; the coating will wear away naturally in the pad sweep area during normal use. Part number 4514-45006 is intended for direct brake service on the listed application.
Quality Assurance
DFC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical attributes. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for corrosion resistance and fitment consistency.
