Dynamite Friction 4514-42035 Disc Brake Pad and Rotor / Drum Brake Shoe and Drum Kit - Front and Rear
Brake Kit for Jeep Cherokee and Grand Cherokee
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-42035, is a complete brake service kit for select Jeep applications. It combines coated rotors, advanced friction pads, and matching drum brake service components for front and rear brake maintenance on the listed vehicles.
Key Features
- Fits 1999 Jeep Cherokee, front and rear, with 82mm tall rotors
- Fits 1993-1994 Jeep Grand Cherokee, front and rear, with rear drum brakes
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance and reduced break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- GeoSpec coated rotors use a silver-gray protective finish to resist rust and arrive dry, ready to install
- Rotors are machined to tight tolerances, finished non-directionally, and inspected for balance and OE-spec critical dimensions
- Hardware kits use PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is built around OE-style fit, consistent friction, and corrosion resistance. For Jeep Cherokee and Jeep Grand Cherokee brake service, this kit brings together coated disc rotors, advanced pads, and drum brake service components in one package for the specified front and rear positions. Part number 4514-42035 is a practical choice when you need a complete brake refresh for a 1999 Jeep Cherokee or a 1993-1994 Jeep Grand Cherokee with rear drum brakes.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Addresses
- Brake noise from worn pads, fatigued hardware, or uneven contact surfaces
- Rust buildup on rotor surfaces that can affect braking consistency
- Reduced pedal feel caused by worn friction material or out-of-spec rotors
- Uneven wear from corroded or weakened drum brake hardware
- Longer stopping distances from aged brake components
Installation Notes
Verify rotor height and rear brake configuration before ordering. This kit is listed for front and rear service on the 1999 Jeep Cherokee with 82mm tall rotors and on the 1993-1994 Jeep Grand Cherokee with rear drum brakes. Clean handling is not required for the coated rotors because they are shipped dry and ready to install; the coating is removed naturally by the brake friction material during use. Inspect calipers, drums, and related wear items during service to confirm the rest of the brake system is within specification.
Quality Assurance
DFC brake pads are post-cured and scorched for consistent friction behavior, while the rotors are manufactured to G3000/G11H18 cast iron specifications and checked against OE requirements. Each rotor includes a 12-month warranty against defects in material and workmanship.
Brake Kit for Jeep Cherokee and Grand Cherokee
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-42035, is a complete brake service kit for select Jeep applications. It combines coated rotors, advanced friction pads, and matching drum brake service components for front and rear brake maintenance on the listed vehicles.
Key Features
- Fits 1999 Jeep Cherokee, front and rear, with 82mm tall rotors
- Fits 1993-1994 Jeep Grand Cherokee, front and rear, with rear drum brakes
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance and reduced break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- GeoSpec coated rotors use a silver-gray protective finish to resist rust and arrive dry, ready to install
- Rotors are machined to tight tolerances, finished non-directionally, and inspected for balance and OE-spec critical dimensions
- Hardware kits use PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is built around OE-style fit, consistent friction, and corrosion resistance. For Jeep Cherokee and Jeep Grand Cherokee brake service, this kit brings together coated disc rotors, advanced pads, and drum brake service components in one package for the specified front and rear positions. Part number 4514-42035 is a practical choice when you need a complete brake refresh for a 1999 Jeep Cherokee or a 1993-1994 Jeep Grand Cherokee with rear drum brakes.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Addresses
- Brake noise from worn pads, fatigued hardware, or uneven contact surfaces
- Rust buildup on rotor surfaces that can affect braking consistency
- Reduced pedal feel caused by worn friction material or out-of-spec rotors
- Uneven wear from corroded or weakened drum brake hardware
- Longer stopping distances from aged brake components
Installation Notes
Verify rotor height and rear brake configuration before ordering. This kit is listed for front and rear service on the 1999 Jeep Cherokee with 82mm tall rotors and on the 1993-1994 Jeep Grand Cherokee with rear drum brakes. Clean handling is not required for the coated rotors because they are shipped dry and ready to install; the coating is removed naturally by the brake friction material during use. Inspect calipers, drums, and related wear items during service to confirm the rest of the brake system is within specification.
Quality Assurance
DFC brake pads are post-cured and scorched for consistent friction behavior, while the rotors are manufactured to G3000/G11H18 cast iron specifications and checked against OE requirements. Each rotor includes a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Jeep Cherokee and Grand Cherokee
Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads includes DFC Drums Shoes and Hardware, part number 4514-42035, is a complete brake service kit for select Jeep applications. It combines coated rotors, advanced friction pads, and matching drum brake service components for front and rear brake maintenance on the listed vehicles.
Key Features
- Fits 1999 Jeep Cherokee, front and rear, with 82mm tall rotors
- Fits 1993-1994 Jeep Grand Cherokee, front and rear, with rear drum brakes
- DFC 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance and reduced break-in time
- Premium rubber-steel-rubber shims help improve noise, vibration, and harshness control
- GeoSpec coated rotors use a silver-gray protective finish to resist rust and arrive dry, ready to install
- Rotors are machined to tight tolerances, finished non-directionally, and inspected for balance and OE-spec critical dimensions
- Hardware kits use PTFE coating, vulcanized rubber, and stainless steel for corrosion protection
Product Details
The DFC Geospec Rotors with 5000 Advanced Brake Pads line is built around OE-style fit, consistent friction, and corrosion resistance. For Jeep Cherokee and Jeep Grand Cherokee brake service, this kit brings together coated disc rotors, advanced pads, and drum brake service components in one package for the specified front and rear positions. Part number 4514-42035 is a practical choice when you need a complete brake refresh for a 1999 Jeep Cherokee or a 1993-1994 Jeep Grand Cherokee with rear drum brakes.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Addresses
- Brake noise from worn pads, fatigued hardware, or uneven contact surfaces
- Rust buildup on rotor surfaces that can affect braking consistency
- Reduced pedal feel caused by worn friction material or out-of-spec rotors
- Uneven wear from corroded or weakened drum brake hardware
- Longer stopping distances from aged brake components
Installation Notes
Verify rotor height and rear brake configuration before ordering. This kit is listed for front and rear service on the 1999 Jeep Cherokee with 82mm tall rotors and on the 1993-1994 Jeep Grand Cherokee with rear drum brakes. Clean handling is not required for the coated rotors because they are shipped dry and ready to install; the coating is removed naturally by the brake friction material during use. Inspect calipers, drums, and related wear items during service to confirm the rest of the brake system is within specification.
Quality Assurance
DFC brake pads are post-cured and scorched for consistent friction behavior, while the rotors are manufactured to G3000/G11H18 cast iron specifications and checked against OE requirements. Each rotor includes a 12-month warranty against defects in material and workmanship.
