Dynamite Friction 4514-40037 Disc Brake Kit - Front and Rear
Brake Kit for 2008-2009 Dodge Caliber
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2008-2009 Dodge Caliber. Part number 4514-40037 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a direct brake refresh.
Compatible With 2008-2009 Dodge Caliber front and rear brake applications, this kit is designed for drivers replacing worn rotors and pads while restoring consistent pedal feel and braking response. The DFC GEOSPEC rotor finish helps resist corrosion, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Part number 4514-40037 for 2008-2009 Dodge Caliber front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware designed to OE form, fit, and function
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required on vented designs. The coating is intended to fight rust better than conventional paint or zinc finishes, and it is swept away by the pad during braking without harmful effects. The 5000 Advanced pads are developed with application-specific friction characteristics for a range of vehicle types, including family sedans and light trucks, and use post-curing and scorching processes to support stable performance from the first stop. The included hardware uses PTFE coating, vulcanized rubber, and stainless steel for consistent caliper movement and reduced noise.
Common Brake Issues This Kit Addresses
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel from rotor wear or pad glazing
- Excessive caliper movement caused by aged hardware
- Reduced stopping performance from worn friction material
Installation Notes
Fits 2008-2009 Dodge Caliber, front and rear. Verify axle position and brake configuration before installation. Clean all mating surfaces, follow proper torque specifications, and complete a controlled bed-in procedure after installation. Part number 4514-40037 is intended for service replacement on the listed application.
Quality Assurance
DFC rotors are manufactured to OE specifications, 100% inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. Part number 4514-40037 reflects a complete brake service package for the Dodge Caliber with coated rotors, ceramic pads, and hardware.
Brake Kit for 2008-2009 Dodge Caliber
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2008-2009 Dodge Caliber. Part number 4514-40037 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a direct brake refresh.
Compatible With 2008-2009 Dodge Caliber front and rear brake applications, this kit is designed for drivers replacing worn rotors and pads while restoring consistent pedal feel and braking response. The DFC GEOSPEC rotor finish helps resist corrosion, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Part number 4514-40037 for 2008-2009 Dodge Caliber front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware designed to OE form, fit, and function
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required on vented designs. The coating is intended to fight rust better than conventional paint or zinc finishes, and it is swept away by the pad during braking without harmful effects. The 5000 Advanced pads are developed with application-specific friction characteristics for a range of vehicle types, including family sedans and light trucks, and use post-curing and scorching processes to support stable performance from the first stop. The included hardware uses PTFE coating, vulcanized rubber, and stainless steel for consistent caliper movement and reduced noise.
Common Brake Issues This Kit Addresses
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel from rotor wear or pad glazing
- Excessive caliper movement caused by aged hardware
- Reduced stopping performance from worn friction material
Installation Notes
Fits 2008-2009 Dodge Caliber, front and rear. Verify axle position and brake configuration before installation. Clean all mating surfaces, follow proper torque specifications, and complete a controlled bed-in procedure after installation. Part number 4514-40037 is intended for service replacement on the listed application.
Quality Assurance
DFC rotors are manufactured to OE specifications, 100% inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. Part number 4514-40037 reflects a complete brake service package for the Dodge Caliber with coated rotors, ceramic pads, and hardware.
Description
Brake Kit for 2008-2009 Dodge Caliber
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2008-2009 Dodge Caliber. Part number 4514-40037 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a direct brake refresh.
Compatible With 2008-2009 Dodge Caliber front and rear brake applications, this kit is designed for drivers replacing worn rotors and pads while restoring consistent pedal feel and braking response. The DFC GEOSPEC rotor finish helps resist corrosion, while the 5000 Advanced pads are formulated for stable friction and quieter operation.
Key Features
- Part number 4514-40037 for 2008-2009 Dodge Caliber front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware designed to OE form, fit, and function
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required on vented designs. The coating is intended to fight rust better than conventional paint or zinc finishes, and it is swept away by the pad during braking without harmful effects. The 5000 Advanced pads are developed with application-specific friction characteristics for a range of vehicle types, including family sedans and light trucks, and use post-curing and scorching processes to support stable performance from the first stop. The included hardware uses PTFE coating, vulcanized rubber, and stainless steel for consistent caliper movement and reduced noise.
Common Brake Issues This Kit Addresses
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel from rotor wear or pad glazing
- Excessive caliper movement caused by aged hardware
- Reduced stopping performance from worn friction material
Installation Notes
Fits 2008-2009 Dodge Caliber, front and rear. Verify axle position and brake configuration before installation. Clean all mating surfaces, follow proper torque specifications, and complete a controlled bed-in procedure after installation. Part number 4514-40037 is intended for service replacement on the listed application.
Quality Assurance
DFC rotors are manufactured to OE specifications, 100% inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. Part number 4514-40037 reflects a complete brake service package for the Dodge Caliber with coated rotors, ceramic pads, and hardware.
