Dynamite Friction 4514-40022 Disc Brake Kit - Front and Rear
Brake Kit for Sprinter Front and Rear Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a complete disc brake kit for select Dodge Sprinter vans. Part number 4514-40022 is built for 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500 applications with 285mm front rotors and clip style brake pad sensors.
This brake service kit combines coated rotors, advanced semi-metallic pads, and matching hardware for a direct-fit repair on front and rear brake service jobs. It is a practical choice for Dodge Sprinter 2500 and Dodge Sprinter 3500 owners looking for OE-style braking components in one package.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- DFC 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-40022 is part of the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit line, a brake service solution focused on corrosion protection, consistent friction, and OE-style fitment. The coated rotors are machined to tight tolerances, balanced where required, and inspected to confirm critical dimensions. The brake pads are formulated for stable friction performance, while the hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement.
Compatible with 2003-2006 Dodge Sprinter 2500, front and rear, and 2003-2005 Dodge Sprinter 3500, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness after rotor service
- Hardware fatigue, corrosion, or weak spring tension
Installation Notes
Before installation, verify rotor size and sensor style for your Sprinter application. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For best results, clean the hub mounting surface, inspect calipers and slides, and follow proper pad bed-in procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo machining, balance checks on vented rotors, and final inspection of critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Sprinter Front and Rear Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a complete disc brake kit for select Dodge Sprinter vans. Part number 4514-40022 is built for 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500 applications with 285mm front rotors and clip style brake pad sensors.
This brake service kit combines coated rotors, advanced semi-metallic pads, and matching hardware for a direct-fit repair on front and rear brake service jobs. It is a practical choice for Dodge Sprinter 2500 and Dodge Sprinter 3500 owners looking for OE-style braking components in one package.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- DFC 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-40022 is part of the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit line, a brake service solution focused on corrosion protection, consistent friction, and OE-style fitment. The coated rotors are machined to tight tolerances, balanced where required, and inspected to confirm critical dimensions. The brake pads are formulated for stable friction performance, while the hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement.
Compatible with 2003-2006 Dodge Sprinter 2500, front and rear, and 2003-2005 Dodge Sprinter 3500, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness after rotor service
- Hardware fatigue, corrosion, or weak spring tension
Installation Notes
Before installation, verify rotor size and sensor style for your Sprinter application. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For best results, clean the hub mounting surface, inspect calipers and slides, and follow proper pad bed-in procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo machining, balance checks on vented rotors, and final inspection of critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Sprinter Front and Rear Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit is a complete disc brake kit for select Dodge Sprinter vans. Part number 4514-40022 is built for 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500 applications with 285mm front rotors and clip style brake pad sensors.
This brake service kit combines coated rotors, advanced semi-metallic pads, and matching hardware for a direct-fit repair on front and rear brake service jobs. It is a practical choice for Dodge Sprinter 2500 and Dodge Sprinter 3500 owners looking for OE-style braking components in one package.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- DFC 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
Part number 4514-40022 is part of the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit line, a brake service solution focused on corrosion protection, consistent friction, and OE-style fitment. The coated rotors are machined to tight tolerances, balanced where required, and inspected to confirm critical dimensions. The brake pads are formulated for stable friction performance, while the hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement.
Compatible with 2003-2006 Dodge Sprinter 2500, front and rear, and 2003-2005 Dodge Sprinter 3500, front and rear. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise during stops
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness after rotor service
- Hardware fatigue, corrosion, or weak spring tension
Installation Notes
Before installation, verify rotor size and sensor style for your Sprinter application. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For best results, clean the hub mounting surface, inspect calipers and slides, and follow proper pad bed-in procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications and undergo machining, balance checks on vented rotors, and final inspection of critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
