Dynamite Friction 4514-40009 Disc Brake Kit - Front and Rear
Brake Kit for Sprinter Front and Rear Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit for select Dodge Sprinter applications. It combines coated rotors, semi-metallic pads, and brake hardware in one service package for front and rear brake replacement.
Compatible With 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500, this kit is built for vehicles with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Part number 4514-40009 is a direct-fit service solution for these Sprinter brake configurations.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Dry-processed rotors ready for installation without oil removal
- Brake hardware kit included for a complete brake service
- Engineered to OE specifications for fit, durability, and stability
- Part number 4514-40009 for easy lookup
Product Line Details
The DFC GEOSPEC rotor line uses G3000/G11H18 cast iron and a coated surface designed to resist rust better than conventional paint or zinc finishes. The rotors are machined to tight tolerances, inspected for balance on vented applications, and finished to support quieter stops and consistent pad contact. The 5000 Advanced pad line is post-cured, scorched to reduce initial break-in, and paired with rubber-steel-rubber shims to help control noise and vibration.
The included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to replace worn or corroded brake hardware during service. This helps restore proper caliper movement and spring tension on the Sprinter front and rear brake system.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from aged friction material
- Longer service time caused by cleaning oil-coated rotors before installation
Installation Notes
Fits 2003-2006 Dodge Sprinter 2500, front and rear, with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Fits 2003-2005 Dodge Sprinter 3500, front and rear, with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Verify rotor size, caliper type, and sensor style before installation. The dry rotor coating is swept away by the pads during normal braking, so no special prep is required.
Quality Assurance
Each DFC GEOSPEC rotor is machined to OE-style tolerances, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE form, fit, and function standards.
Brake Kit for Sprinter Front and Rear Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit for select Dodge Sprinter applications. It combines coated rotors, semi-metallic pads, and brake hardware in one service package for front and rear brake replacement.
Compatible With 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500, this kit is built for vehicles with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Part number 4514-40009 is a direct-fit service solution for these Sprinter brake configurations.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Dry-processed rotors ready for installation without oil removal
- Brake hardware kit included for a complete brake service
- Engineered to OE specifications for fit, durability, and stability
- Part number 4514-40009 for easy lookup
Product Line Details
The DFC GEOSPEC rotor line uses G3000/G11H18 cast iron and a coated surface designed to resist rust better than conventional paint or zinc finishes. The rotors are machined to tight tolerances, inspected for balance on vented applications, and finished to support quieter stops and consistent pad contact. The 5000 Advanced pad line is post-cured, scorched to reduce initial break-in, and paired with rubber-steel-rubber shims to help control noise and vibration.
The included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to replace worn or corroded brake hardware during service. This helps restore proper caliper movement and spring tension on the Sprinter front and rear brake system.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from aged friction material
- Longer service time caused by cleaning oil-coated rotors before installation
Installation Notes
Fits 2003-2006 Dodge Sprinter 2500, front and rear, with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Fits 2003-2005 Dodge Sprinter 3500, front and rear, with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Verify rotor size, caliper type, and sensor style before installation. The dry rotor coating is swept away by the pads during normal braking, so no special prep is required.
Quality Assurance
Each DFC GEOSPEC rotor is machined to OE-style tolerances, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE form, fit, and function standards.
Description
Brake Kit for Sprinter Front and Rear Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit for select Dodge Sprinter applications. It combines coated rotors, semi-metallic pads, and brake hardware in one service package for front and rear brake replacement.
Compatible With 2003-2006 Dodge Sprinter 2500 and 2003-2005 Dodge Sprinter 3500, this kit is built for vehicles with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Part number 4514-40009 is a direct-fit service solution for these Sprinter brake configurations.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Dry-processed rotors ready for installation without oil removal
- Brake hardware kit included for a complete brake service
- Engineered to OE specifications for fit, durability, and stability
- Part number 4514-40009 for easy lookup
Product Line Details
The DFC GEOSPEC rotor line uses G3000/G11H18 cast iron and a coated surface designed to resist rust better than conventional paint or zinc finishes. The rotors are machined to tight tolerances, inspected for balance on vented applications, and finished to support quieter stops and consistent pad contact. The 5000 Advanced pad line is post-cured, scorched to reduce initial break-in, and paired with rubber-steel-rubber shims to help control noise and vibration.
The included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to replace worn or corroded brake hardware during service. This helps restore proper caliper movement and spring tension on the Sprinter front and rear brake system.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from aged friction material
- Longer service time caused by cleaning oil-coated rotors before installation
Installation Notes
Fits 2003-2006 Dodge Sprinter 2500, front and rear, with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Fits 2003-2005 Dodge Sprinter 3500, front and rear, with 285mm front rotors, pin style brake pad sensors, and Bosch calipers. Verify rotor size, caliper type, and sensor style before installation. The dry rotor coating is swept away by the pads during normal braking, so no special prep is required.
Quality Assurance
Each DFC GEOSPEC rotor is machined to OE-style tolerances, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE form, fit, and function standards.
