Dynamite Friction 4514-39031 Disc Brake Kit - Front and Rear
Brake Kit for Chrysler 300 and Dodge Challenger
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service on select Chrysler and Dodge applications. Part number 4514-39031 combines coated rotors, semi-metallic pads, and matched brake hardware for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit included for a complete brake service package
- Part number 4514-39031 for front and rear brake replacement
Product Line Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are post cured for stability. The pads are also scorched to remove uncured bonding agents, which helps reduce the need for extended break-in. DFC GEOSPEC rotors are machined to OE-style tolerances, processed dry, and ready to install without additional cleaning. The included hardware is designed with PTFE coating, vulcanized rubber, and stainless steel for proper caliper movement and fit.
Fitment
- Fits 2009-2018 Dodge Challenger, front and rear
- Fits 2010 Chrysler 300, front and rear
- Fits 2008-2010 Dodge Charger, front and rear; vented rear rotors; excluding Police & Daytona packages
- Fits 2005-2009 Chrysler 300, front and rear
- Fits 2006-2008 Dodge Magnum, front and rear; vented rear rotors
- Fits 2007 Dodge Charger, front and rear; vented rear rotors; 320 x 22mm rotors
- Fits 2006 Dodge Charger, front and rear
- Fits 2005-2005 Dodge Magnum, front and rear
Common Brake Service Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping performance from worn rotors and pads
- Rotor rust and surface corrosion on daily-driven vehicles
- Longer pedal feel recovery after brake service
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean hub surfaces thoroughly, torque all fasteners to factory specifications, and follow the recommended pad bedding procedure after installation. This kit is intended for front and rear brake service on the listed Chrysler 300, Dodge Charger, Dodge Challenger, and Dodge Magnum applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and balanced where required. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-39031 is built as a complete service kit for consistent fit and finish.
Brake Kit for Chrysler 300 and Dodge Challenger
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service on select Chrysler and Dodge applications. Part number 4514-39031 combines coated rotors, semi-metallic pads, and matched brake hardware for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit included for a complete brake service package
- Part number 4514-39031 for front and rear brake replacement
Product Line Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are post cured for stability. The pads are also scorched to remove uncured bonding agents, which helps reduce the need for extended break-in. DFC GEOSPEC rotors are machined to OE-style tolerances, processed dry, and ready to install without additional cleaning. The included hardware is designed with PTFE coating, vulcanized rubber, and stainless steel for proper caliper movement and fit.
Fitment
- Fits 2009-2018 Dodge Challenger, front and rear
- Fits 2010 Chrysler 300, front and rear
- Fits 2008-2010 Dodge Charger, front and rear; vented rear rotors; excluding Police & Daytona packages
- Fits 2005-2009 Chrysler 300, front and rear
- Fits 2006-2008 Dodge Magnum, front and rear; vented rear rotors
- Fits 2007 Dodge Charger, front and rear; vented rear rotors; 320 x 22mm rotors
- Fits 2006 Dodge Charger, front and rear
- Fits 2005-2005 Dodge Magnum, front and rear
Common Brake Service Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping performance from worn rotors and pads
- Rotor rust and surface corrosion on daily-driven vehicles
- Longer pedal feel recovery after brake service
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean hub surfaces thoroughly, torque all fasteners to factory specifications, and follow the recommended pad bedding procedure after installation. This kit is intended for front and rear brake service on the listed Chrysler 300, Dodge Charger, Dodge Challenger, and Dodge Magnum applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and balanced where required. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-39031 is built as a complete service kit for consistent fit and finish.
Description
Brake Kit for Chrysler 300 and Dodge Challenger
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front and rear disc brake kit built for OE-style service on select Chrysler and Dodge applications. Part number 4514-39031 combines coated rotors, semi-metallic pads, and matched brake hardware for a complete brake refresh.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit included for a complete brake service package
- Part number 4514-39031 for front and rear brake replacement
Product Line Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are post cured for stability. The pads are also scorched to remove uncured bonding agents, which helps reduce the need for extended break-in. DFC GEOSPEC rotors are machined to OE-style tolerances, processed dry, and ready to install without additional cleaning. The included hardware is designed with PTFE coating, vulcanized rubber, and stainless steel for proper caliper movement and fit.
Fitment
- Fits 2009-2018 Dodge Challenger, front and rear
- Fits 2010 Chrysler 300, front and rear
- Fits 2008-2010 Dodge Charger, front and rear; vented rear rotors; excluding Police & Daytona packages
- Fits 2005-2009 Chrysler 300, front and rear
- Fits 2006-2008 Dodge Magnum, front and rear; vented rear rotors
- Fits 2007 Dodge Charger, front and rear; vented rear rotors; 320 x 22mm rotors
- Fits 2006 Dodge Charger, front and rear
- Fits 2005-2005 Dodge Magnum, front and rear
Common Brake Service Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping performance from worn rotors and pads
- Rotor rust and surface corrosion on daily-driven vehicles
- Longer pedal feel recovery after brake service
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean hub surfaces thoroughly, torque all fasteners to factory specifications, and follow the recommended pad bedding procedure after installation. This kit is intended for front and rear brake service on the listed Chrysler 300, Dodge Charger, Dodge Challenger, and Dodge Magnum applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and balanced where required. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4514-39031 is built as a complete service kit for consistent fit and finish.
