Dynamite Friction 4514-39029 Disc Brake Kit - Front and Rear
Complete Brake Kit for Charger and Magnum
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit, part number 4514-39029, combines coated rotors, semi-metallic pads, and matched brake hardware in one service kit. It is built for front and rear brake service on select Dodge Charger and Dodge Magnum applications, including police and Daytona package vehicles where listed.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining and inspection for dimensional consistency
- 12-month warranty against defects in material and workmanship on the rotors
Product Details
DFC Complete Brake Kits are designed to simplify brake service by combining the major wear components needed for a full brake job. The GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during service. Their coated surface is intended to resist rust better than conventional painted or zinc-coated rotors, while the cast iron construction and OE-spec machining support stable braking performance. The 5000 Advanced pads are formulated for consistent friction, and the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-39029 is a practical choice for drivers servicing a Dodge Charger or Dodge Magnum brake system with a complete front and rear replacement approach.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping performance from worn rotors and friction material
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes and Fitment
Compatible With:
- Fits 2006 Dodge Charger, front and rear
- Fits 2007 Dodge Charger, front and rear, with Daytona & Police Packages; vented rear rotors; 350 x 26mm rotors
- Fits 2008-2010 Dodge Charger, front and rear, Police & Daytona Packages
- Fits 2011-2013 Dodge Charger, front and rear
- Fits 2014 Dodge Charger, front and rear, without High Performance Brakes
- Fits 2006-2008 Dodge Magnum, front and rear, with Police Package
Verify rotor size, brake package, and rear rotor configuration before installation. Clean hub surfaces thoroughly, inspect calipers and slides, and follow proper pad bedding procedures after service. Part number 4514-39029 is also a useful reference when ordering a complete brake service kit for these applications.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Complete Brake Kit for Charger and Magnum
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit, part number 4514-39029, combines coated rotors, semi-metallic pads, and matched brake hardware in one service kit. It is built for front and rear brake service on select Dodge Charger and Dodge Magnum applications, including police and Daytona package vehicles where listed.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining and inspection for dimensional consistency
- 12-month warranty against defects in material and workmanship on the rotors
Product Details
DFC Complete Brake Kits are designed to simplify brake service by combining the major wear components needed for a full brake job. The GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during service. Their coated surface is intended to resist rust better than conventional painted or zinc-coated rotors, while the cast iron construction and OE-spec machining support stable braking performance. The 5000 Advanced pads are formulated for consistent friction, and the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-39029 is a practical choice for drivers servicing a Dodge Charger or Dodge Magnum brake system with a complete front and rear replacement approach.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping performance from worn rotors and friction material
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes and Fitment
Compatible With:
- Fits 2006 Dodge Charger, front and rear
- Fits 2007 Dodge Charger, front and rear, with Daytona & Police Packages; vented rear rotors; 350 x 26mm rotors
- Fits 2008-2010 Dodge Charger, front and rear, Police & Daytona Packages
- Fits 2011-2013 Dodge Charger, front and rear
- Fits 2014 Dodge Charger, front and rear, without High Performance Brakes
- Fits 2006-2008 Dodge Magnum, front and rear, with Police Package
Verify rotor size, brake package, and rear rotor configuration before installation. Clean hub surfaces thoroughly, inspect calipers and slides, and follow proper pad bedding procedures after service. Part number 4514-39029 is also a useful reference when ordering a complete brake service kit for these applications.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Description
Complete Brake Kit for Charger and Magnum
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Semi Metallic and Hardware Kit, part number 4514-39029, combines coated rotors, semi-metallic pads, and matched brake hardware in one service kit. It is built for front and rear brake service on select Dodge Charger and Dodge Magnum applications, including police and Daytona package vehicles where listed.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced semi-metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining and inspection for dimensional consistency
- 12-month warranty against defects in material and workmanship on the rotors
Product Details
DFC Complete Brake Kits are designed to simplify brake service by combining the major wear components needed for a full brake job. The GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during service. Their coated surface is intended to resist rust better than conventional painted or zinc-coated rotors, while the cast iron construction and OE-spec machining support stable braking performance. The 5000 Advanced pads are formulated for consistent friction, and the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-39029 is a practical choice for drivers servicing a Dodge Charger or Dodge Magnum brake system with a complete front and rear replacement approach.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping performance from worn rotors and friction material
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes and Fitment
Compatible With:
- Fits 2006 Dodge Charger, front and rear
- Fits 2007 Dodge Charger, front and rear, with Daytona & Police Packages; vented rear rotors; 350 x 26mm rotors
- Fits 2008-2010 Dodge Charger, front and rear, Police & Daytona Packages
- Fits 2011-2013 Dodge Charger, front and rear
- Fits 2014 Dodge Charger, front and rear, without High Performance Brakes
- Fits 2006-2008 Dodge Magnum, front and rear, with Police Package
Verify rotor size, brake package, and rear rotor configuration before installation. Clean hub surfaces thoroughly, inspect calipers and slides, and follow proper pad bedding procedures after service. Part number 4514-39029 is also a useful reference when ordering a complete brake service kit for these applications.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
