Dynamite Friction 4514-39008 Disc Brake Kit - Front and Rear
Brake Kit for Mitsubishi Outlander
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on select Mitsubishi Outlander models. Part number 4514-39008 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Compatible With 2007-2013 Mitsubishi Outlander, front and rear, this kit is also listed for 2008-2011 Mitsubishi Outlander, front and rear, 7 passenger vehicle. It is a direct-fit brake service solution for drivers looking for OE-style rotor finish, stable pad performance, and updated hardware in one package.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for faster pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware with PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances and finished to support even pad contact, quieter stops, and consistent pedal feel. The coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the extra cleaning step often required with oil-coated rotors. The DFC 5000 Advanced Brake Pads are formulated for stable friction performance and are assembled with shims that help reduce noise, vibration, and harshness. DFC hardware is designed to restore proper caliper movement and spring tension where worn or corroded components can affect braking performance. Part number 4514-39008 is a practical choice for Mitsubishi Outlander brake service when you want rotors, pads, and hardware matched for the same axle set.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Vibration or rough braking from rotor wear or finish issues
Installation Notes
Fits 2007-2013 Mitsubishi Outlander, front and rear. Fits 2008-2011 Mitsubishi Outlander, front and rear, 7 passenger vehicle. Before installation, confirm rotor size, axle position, and vehicle configuration against the existing brake system. The dry rotor coating is removed naturally by the brake pads during normal use, so no additional rotor prep is required. For best results, clean the hub mounting surface and follow proper pad bedding procedures after installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical dimensions and OE-spec compliance. Vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-39008 is backed by DFC’s focus on OE-style fit, finish, and braking consistency.
Brake Kit for Mitsubishi Outlander
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on select Mitsubishi Outlander models. Part number 4514-39008 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Compatible With 2007-2013 Mitsubishi Outlander, front and rear, this kit is also listed for 2008-2011 Mitsubishi Outlander, front and rear, 7 passenger vehicle. It is a direct-fit brake service solution for drivers looking for OE-style rotor finish, stable pad performance, and updated hardware in one package.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for faster pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware with PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances and finished to support even pad contact, quieter stops, and consistent pedal feel. The coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the extra cleaning step often required with oil-coated rotors. The DFC 5000 Advanced Brake Pads are formulated for stable friction performance and are assembled with shims that help reduce noise, vibration, and harshness. DFC hardware is designed to restore proper caliper movement and spring tension where worn or corroded components can affect braking performance. Part number 4514-39008 is a practical choice for Mitsubishi Outlander brake service when you want rotors, pads, and hardware matched for the same axle set.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Vibration or rough braking from rotor wear or finish issues
Installation Notes
Fits 2007-2013 Mitsubishi Outlander, front and rear. Fits 2008-2011 Mitsubishi Outlander, front and rear, 7 passenger vehicle. Before installation, confirm rotor size, axle position, and vehicle configuration against the existing brake system. The dry rotor coating is removed naturally by the brake pads during normal use, so no additional rotor prep is required. For best results, clean the hub mounting surface and follow proper pad bedding procedures after installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical dimensions and OE-spec compliance. Vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-39008 is backed by DFC’s focus on OE-style fit, finish, and braking consistency.
Description
Brake Kit for Mitsubishi Outlander
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on select Mitsubishi Outlander models. Part number 4514-39008 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
Compatible With 2007-2013 Mitsubishi Outlander, front and rear, this kit is also listed for 2008-2011 Mitsubishi Outlander, front and rear, 7 passenger vehicle. It is a direct-fit brake service solution for drivers looking for OE-style rotor finish, stable pad performance, and updated hardware in one package.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for faster pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented applications
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware with PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances and finished to support even pad contact, quieter stops, and consistent pedal feel. The coating helps resist rust better than conventional paint or zinc finishes, while the dry packaging avoids the extra cleaning step often required with oil-coated rotors. The DFC 5000 Advanced Brake Pads are formulated for stable friction performance and are assembled with shims that help reduce noise, vibration, and harshness. DFC hardware is designed to restore proper caliper movement and spring tension where worn or corroded components can affect braking performance. Part number 4514-39008 is a practical choice for Mitsubishi Outlander brake service when you want rotors, pads, and hardware matched for the same axle set.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Vibration or rough braking from rotor wear or finish issues
Installation Notes
Fits 2007-2013 Mitsubishi Outlander, front and rear. Fits 2008-2011 Mitsubishi Outlander, front and rear, 7 passenger vehicle. Before installation, confirm rotor size, axle position, and vehicle configuration against the existing brake system. The dry rotor coating is removed naturally by the brake pads during normal use, so no additional rotor prep is required. For best results, clean the hub mounting surface and follow proper pad bedding procedures after installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical dimensions and OE-spec compliance. Vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-39008 is backed by DFC’s focus on OE-style fit, finish, and braking consistency.
