Dynamite Friction 4514-39007 Disc Brake Kit - Front and Rear
Brake Kit for Mitsubishi, Chrysler, Jeep, and Dodge
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for front and rear axle replacement. Part number 4514-39007 combines coated rotors, ceramic brake pads, and matched hardware for vehicles such as the Mitsubishi Lancer, Mitsubishi Outlander, Chrysler 200, Jeep Compass, and Dodge Avenger.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 4514-39007 is built for drivers who need a direct brake service package with OE-style fitment and matched friction components. The coated rotors are machined to tight tolerances, inspected for balance on vented applications, and finished to OE specifications for durability and consistent stopping performance. The ceramic pads are formulated for stable friction, reduced break-in time, and quieter operation, while the hardware kit addresses worn or corroded clips and contact points that can contribute to uneven wear and brake noise.
Compatible With 2008-2016 Mitsubishi Lancer, front and rear; 2012-2013 Mitsubishi Outlander, front and rear; 2011-2012 Mitsubishi Outlander Sport, front and rear; 2011-2012 Mitsubishi RVR, front and rear; 2008-2011 Mitsubishi Outlander, front and rear; 2013-2014 Chrysler 200, front and rear; 2011-2012 Chrysler 200, front and rear; 2009-2011 Jeep Compass, front and rear; 2009-2011 Jeep Patriot, front and rear; 2008-2009 Dodge Avenger, front and rear. This part number 4514-39007 is also a fitment-focused search match for Mitsubishi Lancer brake kit and Chrysler 200 front and rear brake replacement.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping consistency from aged pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn caliper hardware contact points
Installation Notes
Before installation, verify rotor size and vehicle configuration against the listed fitment notes, especially on Chrysler 200 and Jeep applications with specified rear rotor dimensions. Clean all hub and mounting surfaces, inspect calipers and slides for wear, and follow the vehicle manufacturer’s brake bedding procedure after installation. The coated rotors are shipped dry and ready to install without additional cleaning.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, processed through 100% inspection for critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for Mitsubishi, Chrysler, Jeep, and Dodge
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for front and rear axle replacement. Part number 4514-39007 combines coated rotors, ceramic brake pads, and matched hardware for vehicles such as the Mitsubishi Lancer, Mitsubishi Outlander, Chrysler 200, Jeep Compass, and Dodge Avenger.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 4514-39007 is built for drivers who need a direct brake service package with OE-style fitment and matched friction components. The coated rotors are machined to tight tolerances, inspected for balance on vented applications, and finished to OE specifications for durability and consistent stopping performance. The ceramic pads are formulated for stable friction, reduced break-in time, and quieter operation, while the hardware kit addresses worn or corroded clips and contact points that can contribute to uneven wear and brake noise.
Compatible With 2008-2016 Mitsubishi Lancer, front and rear; 2012-2013 Mitsubishi Outlander, front and rear; 2011-2012 Mitsubishi Outlander Sport, front and rear; 2011-2012 Mitsubishi RVR, front and rear; 2008-2011 Mitsubishi Outlander, front and rear; 2013-2014 Chrysler 200, front and rear; 2011-2012 Chrysler 200, front and rear; 2009-2011 Jeep Compass, front and rear; 2009-2011 Jeep Patriot, front and rear; 2008-2009 Dodge Avenger, front and rear. This part number 4514-39007 is also a fitment-focused search match for Mitsubishi Lancer brake kit and Chrysler 200 front and rear brake replacement.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping consistency from aged pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn caliper hardware contact points
Installation Notes
Before installation, verify rotor size and vehicle configuration against the listed fitment notes, especially on Chrysler 200 and Jeep applications with specified rear rotor dimensions. Clean all hub and mounting surfaces, inspect calipers and slides for wear, and follow the vehicle manufacturer’s brake bedding procedure after installation. The coated rotors are shipped dry and ready to install without additional cleaning.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, processed through 100% inspection for critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
Description
Brake Kit for Mitsubishi, Chrysler, Jeep, and Dodge
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete disc brake service solution for front and rear axle replacement. Part number 4514-39007 combines coated rotors, ceramic brake pads, and matched hardware for vehicles such as the Mitsubishi Lancer, Mitsubishi Outlander, Chrysler 200, Jeep Compass, and Dodge Avenger.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 4514-39007 is built for drivers who need a direct brake service package with OE-style fitment and matched friction components. The coated rotors are machined to tight tolerances, inspected for balance on vented applications, and finished to OE specifications for durability and consistent stopping performance. The ceramic pads are formulated for stable friction, reduced break-in time, and quieter operation, while the hardware kit addresses worn or corroded clips and contact points that can contribute to uneven wear and brake noise.
Compatible With 2008-2016 Mitsubishi Lancer, front and rear; 2012-2013 Mitsubishi Outlander, front and rear; 2011-2012 Mitsubishi Outlander Sport, front and rear; 2011-2012 Mitsubishi RVR, front and rear; 2008-2011 Mitsubishi Outlander, front and rear; 2013-2014 Chrysler 200, front and rear; 2011-2012 Chrysler 200, front and rear; 2009-2011 Jeep Compass, front and rear; 2009-2011 Jeep Patriot, front and rear; 2008-2009 Dodge Avenger, front and rear. This part number 4514-39007 is also a fitment-focused search match for Mitsubishi Lancer brake kit and Chrysler 200 front and rear brake replacement.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping consistency from aged pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn caliper hardware contact points
Installation Notes
Before installation, verify rotor size and vehicle configuration against the listed fitment notes, especially on Chrysler 200 and Jeep applications with specified rear rotor dimensions. Clean all hub and mounting surfaces, inspect calipers and slides for wear, and follow the vehicle manufacturer’s brake bedding procedure after installation. The coated rotors are shipped dry and ready to install without additional cleaning.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, processed through 100% inspection for critical dimensions, and backed by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
