Dynamite Friction 4514-32011 Disc Brake Kit - Front and Rear
Brake Kit for Mini Cooper Front and Rear
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-32011, is a complete disc brake kit for select Mini Cooper applications. It combines coated rotors, advanced low-metallic pads, and matching hardware components to support consistent braking performance, reduced noise, and easier service work.
- Fits 2009-2014 Mini Cooper, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- OE-style form, fit, and function for brake service replacement
- Part number 4514-32011 for application matching
Product Details
This DFC brake service kit is built for drivers and technicians servicing a Mini Cooper brake job that requires front and rear coverage. The GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports even pad contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce vibration and brake noise. Part number 4514-32011 is a direct-fit brake kit solution for 2009-2014 Mini Cooper front and rear service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Longer stopping distances from worn pads and rotors
- Rotor rust buildup on exposed braking surfaces
- Brake vibration related to uneven rotor finish or pad transfer
Installation Notes
For best results, inspect calipers, slides, and related brake components before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Follow the vehicle manufacturer’s torque specifications and bedding procedure after installation to promote even pad transfer and consistent braking feel. Verify fitment against the vehicle’s brake configuration before ordering, especially on 2009-2014 Mini Cooper front and rear applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
Brake Kit for Mini Cooper Front and Rear
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-32011, is a complete disc brake kit for select Mini Cooper applications. It combines coated rotors, advanced low-metallic pads, and matching hardware components to support consistent braking performance, reduced noise, and easier service work.
- Fits 2009-2014 Mini Cooper, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- OE-style form, fit, and function for brake service replacement
- Part number 4514-32011 for application matching
Product Details
This DFC brake service kit is built for drivers and technicians servicing a Mini Cooper brake job that requires front and rear coverage. The GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports even pad contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce vibration and brake noise. Part number 4514-32011 is a direct-fit brake kit solution for 2009-2014 Mini Cooper front and rear service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Longer stopping distances from worn pads and rotors
- Rotor rust buildup on exposed braking surfaces
- Brake vibration related to uneven rotor finish or pad transfer
Installation Notes
For best results, inspect calipers, slides, and related brake components before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Follow the vehicle manufacturer’s torque specifications and bedding procedure after installation to promote even pad transfer and consistent braking feel. Verify fitment against the vehicle’s brake configuration before ordering, especially on 2009-2014 Mini Cooper front and rear applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
Description
Brake Kit for Mini Cooper Front and Rear
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4514-32011, is a complete disc brake kit for select Mini Cooper applications. It combines coated rotors, advanced low-metallic pads, and matching hardware components to support consistent braking performance, reduced noise, and easier service work.
- Fits 2009-2014 Mini Cooper, front and rear
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in
- OE-style form, fit, and function for brake service replacement
- Part number 4514-32011 for application matching
Product Details
This DFC brake service kit is built for drivers and technicians servicing a Mini Cooper brake job that requires front and rear coverage. The GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports even pad contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance and are assembled with premium shims to help reduce vibration and brake noise. Part number 4514-32011 is a direct-fit brake kit solution for 2009-2014 Mini Cooper front and rear service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Longer stopping distances from worn pads and rotors
- Rotor rust buildup on exposed braking surfaces
- Brake vibration related to uneven rotor finish or pad transfer
Installation Notes
For best results, inspect calipers, slides, and related brake components before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Follow the vehicle manufacturer’s torque specifications and bedding procedure after installation to promote even pad transfer and consistent braking feel. Verify fitment against the vehicle’s brake configuration before ordering, especially on 2009-2014 Mini Cooper front and rear applications.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for critical dimensions and balance. Every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched to support stable friction performance from the first stop.
