Dynamite Friction 4514-31075 Disc Brake Kit - Front and Rear
Brake Kit for BMW 325i, 325is, 325iX, 325e, 325es
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a front and rear disc brake kit built for select BMW E30 applications with Girling calipers. Part number 4514-31075 combines coated rotors, low metallic pads, and matched hardware for a complete brake service on compatible BMW 325i, 325is, 325iX, 325e, and 325es models.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads for stable friction performance
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor casting and machining for durability and fit consistency
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by combining the major wear components in one package. The GEOSPEC rotor line focuses on corrosion protection and ready-to-install convenience, while the 5000 Advanced pad formulation is built for consistent friction across a wide range of driving conditions. For BMW 325i brake kit and BMW 325is brake kit searches, this part number 4514-31075 brings those components together for front and rear service.
Detailed Description
DFC GEOSPEC rotors are processed dry and shipped dry, so they arrive ready for installation without oil removal or extra prep. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact and smoother braking. Each vented rotor is balance-inspected, and every rotor passes final inspection for critical dimensions and OE specification control. The 5000 Advanced pads are 100% post cured, scorched, and assembled with premium shims to help maintain friction stability and reduce brake noise. This kit is a practical choice for owners looking for a BMW 325e brake kit or BMW 325iX brake kit with matched components from one source.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or corrosion
- Longer stopping distances from depleted friction material
- Caliper movement issues related to aged hardware
- Rust buildup on exposed rotor surfaces
Installation Notes and Tips
Compatible With 1987-1991 BMW 325i, Front and Rear, Girling Calipers; 1987-1991 BMW 325is, Front and Rear, Girling Calipers; 1991 BMW 325iX, Front and Rear, Girling Calipers; 1984-1987 BMW 325e, Front and Rear, Girling Calipers; and 1986-1987 BMW 325es, Front and Rear, with Girling Calipers. Verify caliper type before ordering and inspect all mounting points, slides, and contact surfaces during service. Clean the rotor faces before installation and follow the vehicle manufacturer’s brake bedding procedure after assembly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for balance and critical dimensions, and every rotor is covered by a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to OE-style form, fit, and function standards for consistent service results.
Brake Kit for BMW 325i, 325is, 325iX, 325e, 325es
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a front and rear disc brake kit built for select BMW E30 applications with Girling calipers. Part number 4514-31075 combines coated rotors, low metallic pads, and matched hardware for a complete brake service on compatible BMW 325i, 325is, 325iX, 325e, and 325es models.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads for stable friction performance
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor casting and machining for durability and fit consistency
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by combining the major wear components in one package. The GEOSPEC rotor line focuses on corrosion protection and ready-to-install convenience, while the 5000 Advanced pad formulation is built for consistent friction across a wide range of driving conditions. For BMW 325i brake kit and BMW 325is brake kit searches, this part number 4514-31075 brings those components together for front and rear service.
Detailed Description
DFC GEOSPEC rotors are processed dry and shipped dry, so they arrive ready for installation without oil removal or extra prep. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact and smoother braking. Each vented rotor is balance-inspected, and every rotor passes final inspection for critical dimensions and OE specification control. The 5000 Advanced pads are 100% post cured, scorched, and assembled with premium shims to help maintain friction stability and reduce brake noise. This kit is a practical choice for owners looking for a BMW 325e brake kit or BMW 325iX brake kit with matched components from one source.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or corrosion
- Longer stopping distances from depleted friction material
- Caliper movement issues related to aged hardware
- Rust buildup on exposed rotor surfaces
Installation Notes and Tips
Compatible With 1987-1991 BMW 325i, Front and Rear, Girling Calipers; 1987-1991 BMW 325is, Front and Rear, Girling Calipers; 1991 BMW 325iX, Front and Rear, Girling Calipers; 1984-1987 BMW 325e, Front and Rear, Girling Calipers; and 1986-1987 BMW 325es, Front and Rear, with Girling Calipers. Verify caliper type before ordering and inspect all mounting points, slides, and contact surfaces during service. Clean the rotor faces before installation and follow the vehicle manufacturer’s brake bedding procedure after assembly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for balance and critical dimensions, and every rotor is covered by a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to OE-style form, fit, and function standards for consistent service results.
Original: $248.54
-65%$248.54
$86.99Description
Brake Kit for BMW 325i, 325is, 325iX, 325e, 325es
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a front and rear disc brake kit built for select BMW E30 applications with Girling calipers. Part number 4514-31075 combines coated rotors, low metallic pads, and matched hardware for a complete brake service on compatible BMW 325i, 325is, 325iX, 325e, and 325es models.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads for stable friction performance
- Post-cured and scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor casting and machining for durability and fit consistency
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by combining the major wear components in one package. The GEOSPEC rotor line focuses on corrosion protection and ready-to-install convenience, while the 5000 Advanced pad formulation is built for consistent friction across a wide range of driving conditions. For BMW 325i brake kit and BMW 325is brake kit searches, this part number 4514-31075 brings those components together for front and rear service.
Detailed Description
DFC GEOSPEC rotors are processed dry and shipped dry, so they arrive ready for installation without oil removal or extra prep. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to support even pad contact and smoother braking. Each vented rotor is balance-inspected, and every rotor passes final inspection for critical dimensions and OE specification control. The 5000 Advanced pads are 100% post cured, scorched, and assembled with premium shims to help maintain friction stability and reduce brake noise. This kit is a practical choice for owners looking for a BMW 325e brake kit or BMW 325iX brake kit with matched components from one source.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by rotor wear or corrosion
- Longer stopping distances from depleted friction material
- Caliper movement issues related to aged hardware
- Rust buildup on exposed rotor surfaces
Installation Notes and Tips
Compatible With 1987-1991 BMW 325i, Front and Rear, Girling Calipers; 1987-1991 BMW 325is, Front and Rear, Girling Calipers; 1991 BMW 325iX, Front and Rear, Girling Calipers; 1984-1987 BMW 325e, Front and Rear, Girling Calipers; and 1986-1987 BMW 325es, Front and Rear, with Girling Calipers. Verify caliper type before ordering and inspect all mounting points, slides, and contact surfaces during service. Clean the rotor faces before installation and follow the vehicle manufacturer’s brake bedding procedure after assembly. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for balance and critical dimensions, and every rotor is covered by a 12-month warranty against defects in material and workmanship. The pad and hardware components are built to OE-style form, fit, and function standards for consistent service results.
