Dynamite Friction 4514-31074 Disc Brake Kit - Front and Rear
Brake Kit for BMW 325i, 325is, 325iX, 325e, 325es
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit for select BMW E30 applications. Part number 4514-31074 combines coated rotors, low metallic pads, and matching brake hardware for front and rear service on the listed vehicles.
Key Features
- Complete front and rear disc brake kit for select BMW 325i, 325is, 325iX, 325e, and 325es applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install without additional cleaning
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-31074
Product Details
DFC Complete Brake Kits are built to simplify brake service by combining the major wear components in one package. The GEOSPEC rotors are machined to OE-style tolerances, finished with a non-directional surface for even pad bedding, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and noise. This part number 4514-31074 is a direct service solution for BMW 325i brake replacement, BMW 325is brake replacement, and BMW 325e brake service on the listed front and rear applications.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel caused by aged friction material
- Reduced stopping performance from worn service components
- Premature or uneven pad wear related to corroded hardware
Installation Notes
Compatible With 1984-1987 BMW 325e, Front and Rear, with ATE calipers; 1986-1987 BMW 325es, Front and Rear, with ATE calipers; 1987-1991 BMW 325i, Front and Rear, ATE calipers; 1987-1991 BMW 325is, Front and Rear, ATE calipers; and 1991 BMW 325iX, Front and Rear, ATE calipers. Verify caliper type and axle application before installation. The dry-coated rotors are ready to install, and the non-directional finish supports a more even pad bed-in. Part number 4514-31074 should be matched to the vehicle’s brake configuration before service begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for BMW 325i, 325is, 325iX, 325e, 325es
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit for select BMW E30 applications. Part number 4514-31074 combines coated rotors, low metallic pads, and matching brake hardware for front and rear service on the listed vehicles.
Key Features
- Complete front and rear disc brake kit for select BMW 325i, 325is, 325iX, 325e, and 325es applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install without additional cleaning
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-31074
Product Details
DFC Complete Brake Kits are built to simplify brake service by combining the major wear components in one package. The GEOSPEC rotors are machined to OE-style tolerances, finished with a non-directional surface for even pad bedding, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and noise. This part number 4514-31074 is a direct service solution for BMW 325i brake replacement, BMW 325is brake replacement, and BMW 325e brake service on the listed front and rear applications.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel caused by aged friction material
- Reduced stopping performance from worn service components
- Premature or uneven pad wear related to corroded hardware
Installation Notes
Compatible With 1984-1987 BMW 325e, Front and Rear, with ATE calipers; 1986-1987 BMW 325es, Front and Rear, with ATE calipers; 1987-1991 BMW 325i, Front and Rear, ATE calipers; 1987-1991 BMW 325is, Front and Rear, ATE calipers; and 1991 BMW 325iX, Front and Rear, ATE calipers. Verify caliper type and axle application before installation. The dry-coated rotors are ready to install, and the non-directional finish supports a more even pad bed-in. Part number 4514-31074 should be matched to the vehicle’s brake configuration before service begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $249.06
-65%$249.06
$87.17Description
Brake Kit for BMW 325i, 325is, 325iX, 325e, 325es
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit for select BMW E30 applications. Part number 4514-31074 combines coated rotors, low metallic pads, and matching brake hardware for front and rear service on the listed vehicles.
Key Features
- Complete front and rear disc brake kit for select BMW 325i, 325is, 325iX, 325e, and 325es applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install without additional cleaning
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-31074
Product Details
DFC Complete Brake Kits are built to simplify brake service by combining the major wear components in one package. The GEOSPEC rotors are machined to OE-style tolerances, finished with a non-directional surface for even pad bedding, and inspected for critical dimensions and balance. The 5000 Advanced pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and noise. This part number 4514-31074 is a direct service solution for BMW 325i brake replacement, BMW 325is brake replacement, and BMW 325e brake service on the listed front and rear applications.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel caused by aged friction material
- Reduced stopping performance from worn service components
- Premature or uneven pad wear related to corroded hardware
Installation Notes
Compatible With 1984-1987 BMW 325e, Front and Rear, with ATE calipers; 1986-1987 BMW 325es, Front and Rear, with ATE calipers; 1987-1991 BMW 325i, Front and Rear, ATE calipers; 1987-1991 BMW 325is, Front and Rear, ATE calipers; and 1991 BMW 325iX, Front and Rear, ATE calipers. Verify caliper type and axle application before installation. The dry-coated rotors are ready to install, and the non-directional finish supports a more even pad bed-in. Part number 4514-31074 should be matched to the vehicle’s brake configuration before service begins.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical attributes, and backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
