Dynamite Friction 4514-31022 Disc Brake Kit - Front and Rear
Brake Kit for BMW X5 Front and Rear
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is built for 2000-2006 BMW X5 brake service. This disc brake kit combines coated rotors, low metallic pads, and matching hardware for a complete front and rear brake refresh on the BMW X5.
Key Features
- Fits 2000-2006 BMW X5, front and rear
- Part number: 4514-31022
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-style rotor machining and inspection for dimensional consistency
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to support quieter operation and consistent pad contact. The coated surface helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced pads are formulated for stable friction performance and are assembled with rubber-steel-rubber shims to help control brake noise and vibration. Part number 4514-31022 is a practical choice for BMW X5 owners looking for a front and rear brake kit with matched components.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise during stops
- Rotor rust and surface corrosion
- Uneven pad wear or inconsistent braking feel
- Longer pedal response from worn friction components
- Vibration caused by worn or uneven rotors
Installation Notes
Compatible With 2000-2006 BMW X5, front and rear. One fitment note applies to the 2004 BMW X5 application: solid rear rotors. Inspect calipers, slides, and mounting points before installation, and replace worn hardware only as needed based on vehicle condition. Proper rotor and pad bed-in helps promote smooth, quiet braking performance.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and all vented rotors are corrected if needed during the mill-balance process. DFC states that every rotor meets OE specifications and includes a 12-month warranty against defects in material and workmanship. Part number 4514-31022 is backed by the same inspection standards across the kit components.
Brake Kit for BMW X5 Front and Rear
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is built for 2000-2006 BMW X5 brake service. This disc brake kit combines coated rotors, low metallic pads, and matching hardware for a complete front and rear brake refresh on the BMW X5.
Key Features
- Fits 2000-2006 BMW X5, front and rear
- Part number: 4514-31022
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-style rotor machining and inspection for dimensional consistency
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to support quieter operation and consistent pad contact. The coated surface helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced pads are formulated for stable friction performance and are assembled with rubber-steel-rubber shims to help control brake noise and vibration. Part number 4514-31022 is a practical choice for BMW X5 owners looking for a front and rear brake kit with matched components.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise during stops
- Rotor rust and surface corrosion
- Uneven pad wear or inconsistent braking feel
- Longer pedal response from worn friction components
- Vibration caused by worn or uneven rotors
Installation Notes
Compatible With 2000-2006 BMW X5, front and rear. One fitment note applies to the 2004 BMW X5 application: solid rear rotors. Inspect calipers, slides, and mounting points before installation, and replace worn hardware only as needed based on vehicle condition. Proper rotor and pad bed-in helps promote smooth, quiet braking performance.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and all vented rotors are corrected if needed during the mill-balance process. DFC states that every rotor meets OE specifications and includes a 12-month warranty against defects in material and workmanship. Part number 4514-31022 is backed by the same inspection standards across the kit components.
Description
Brake Kit for BMW X5 Front and Rear
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is built for 2000-2006 BMW X5 brake service. This disc brake kit combines coated rotors, low metallic pads, and matching hardware for a complete front and rear brake refresh on the BMW X5.
Key Features
- Fits 2000-2006 BMW X5, front and rear
- Part number: 4514-31022
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- OE-style rotor machining and inspection for dimensional consistency
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then finished with a non-directional surface to support quieter operation and consistent pad contact. The coated surface helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced pads are formulated for stable friction performance and are assembled with rubber-steel-rubber shims to help control brake noise and vibration. Part number 4514-31022 is a practical choice for BMW X5 owners looking for a front and rear brake kit with matched components.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Addresses
- Brake noise during stops
- Rotor rust and surface corrosion
- Uneven pad wear or inconsistent braking feel
- Longer pedal response from worn friction components
- Vibration caused by worn or uneven rotors
Installation Notes
Compatible With 2000-2006 BMW X5, front and rear. One fitment note applies to the 2004 BMW X5 application: solid rear rotors. Inspect calipers, slides, and mounting points before installation, and replace worn hardware only as needed based on vehicle condition. Proper rotor and pad bed-in helps promote smooth, quiet braking performance.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, and all vented rotors are corrected if needed during the mill-balance process. DFC states that every rotor meets OE specifications and includes a 12-month warranty against defects in material and workmanship. Part number 4514-31022 is backed by the same inspection standards across the kit components.
