Dynamite Friction 4514-27031 Disc Brake Kit - Front and Rear
Brake Kit for Range Rover Evoque
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete brake service kit for the front and rear of select Land Rover Range Rover Evoque models. Part number 4514-27031 combines coated rotors, low metallic pads, and matching hardware for a direct brake service package.
- Fits 2012-2015 Land Rover Range Rover Evoque, front and rear
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are built to simplify brake service by combining the main wear components in one package. The GEOSPEC rotor line is designed for dry installation and uses a coated surface that helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced pad line is formulated for stable friction performance and consistent stopping behavior across a range of driving conditions.
Detailed Description
This 4514-27031 brake kit is engineered for drivers servicing a Land Rover Range Rover Evoque with a front and rear brake replacement. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The pads are assembled with noise-reducing shims, while the included hardware kit addresses worn or fatigued brake hardware that can contribute to uneven wear and brake noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn caliper hardware
- Extended stopping distance from worn friction material
Installation Notes and Tips
Fits 2012-2015 Land Rover Range Rover Evoque, front and rear. Before installation, verify rotor size and brake configuration against the vehicle’s existing setup. Clean the rotor friction surfaces only as needed during handling, and follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
Brake Kit for Range Rover Evoque
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete brake service kit for the front and rear of select Land Rover Range Rover Evoque models. Part number 4514-27031 combines coated rotors, low metallic pads, and matching hardware for a direct brake service package.
- Fits 2012-2015 Land Rover Range Rover Evoque, front and rear
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are built to simplify brake service by combining the main wear components in one package. The GEOSPEC rotor line is designed for dry installation and uses a coated surface that helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced pad line is formulated for stable friction performance and consistent stopping behavior across a range of driving conditions.
Detailed Description
This 4514-27031 brake kit is engineered for drivers servicing a Land Rover Range Rover Evoque with a front and rear brake replacement. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The pads are assembled with noise-reducing shims, while the included hardware kit addresses worn or fatigued brake hardware that can contribute to uneven wear and brake noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn caliper hardware
- Extended stopping distance from worn friction material
Installation Notes and Tips
Fits 2012-2015 Land Rover Range Rover Evoque, front and rear. Before installation, verify rotor size and brake configuration against the vehicle’s existing setup. Clean the rotor friction surfaces only as needed during handling, and follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
Original: $360.79
-65%$360.79
$126.28Description
Brake Kit for Range Rover Evoque
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete brake service kit for the front and rear of select Land Rover Range Rover Evoque models. Part number 4514-27031 combines coated rotors, low metallic pads, and matching hardware for a direct brake service package.
- Fits 2012-2015 Land Rover Range Rover Evoque, front and rear
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
DFC Complete Brake Kits are built to simplify brake service by combining the main wear components in one package. The GEOSPEC rotor line is designed for dry installation and uses a coated surface that helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced pad line is formulated for stable friction performance and consistent stopping behavior across a range of driving conditions.
Detailed Description
This 4514-27031 brake kit is engineered for drivers servicing a Land Rover Range Rover Evoque with a front and rear brake replacement. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The pads are assembled with noise-reducing shims, while the included hardware kit addresses worn or fatigued brake hardware that can contribute to uneven wear and brake noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn caliper hardware
- Extended stopping distance from worn friction material
Installation Notes and Tips
Fits 2012-2015 Land Rover Range Rover Evoque, front and rear. Before installation, verify rotor size and brake configuration against the vehicle’s existing setup. Clean the rotor friction surfaces only as needed during handling, and follow proper bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function standards.
