Dynamite Friction 4514-27030 Disc Brake Kit - Front and Rear
Brake Kit for Volvo S80 Front and Rear
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit, part number 4514-27030, is a complete disc brake kit for select Volvo S80 applications. It combines coated rotors, low metallic pads, and matched brake hardware for a service-focused brake repair on 2007-2010 Volvo S80 models.
Key Features
- Fits 2007 Volvo S80, front and rear
- Fits 2008-2010 Volvo S80, front and rear
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and consistent first-stop performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is built for drivers servicing the Volvo S80 brake system with OE-style fit and finish. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-27030 is a practical choice for a front and rear brake service on the Volvo S80.
DFC’s BrandLine focuses on a matched brake service package: coated rotors, advanced pads, and hardware designed to work together. For Volvo S80 owners searching for a front and rear brake kit, 4514-27030 provides the core components needed for a complete brake refresh without mixing unrelated parts.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Longer stopping distances from worn friction material
- Rotor rust on exposed braking surfaces
- Vibration or rough braking feel during everyday driving
Installation Notes
Compatible With 2007-2010 Volvo S80 front and rear brake service. The coated rotors are ready to install without additional cleaning or prep. During installation, inspect calipers, slides, and mounting points for wear, and follow the vehicle manufacturer’s brake service procedures. Proper pad bedding after installation helps promote even transfer layer formation and consistent braking performance.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected after machining, and vented rotors are electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for Volvo S80 Front and Rear
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit, part number 4514-27030, is a complete disc brake kit for select Volvo S80 applications. It combines coated rotors, low metallic pads, and matched brake hardware for a service-focused brake repair on 2007-2010 Volvo S80 models.
Key Features
- Fits 2007 Volvo S80, front and rear
- Fits 2008-2010 Volvo S80, front and rear
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and consistent first-stop performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is built for drivers servicing the Volvo S80 brake system with OE-style fit and finish. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-27030 is a practical choice for a front and rear brake service on the Volvo S80.
DFC’s BrandLine focuses on a matched brake service package: coated rotors, advanced pads, and hardware designed to work together. For Volvo S80 owners searching for a front and rear brake kit, 4514-27030 provides the core components needed for a complete brake refresh without mixing unrelated parts.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Longer stopping distances from worn friction material
- Rotor rust on exposed braking surfaces
- Vibration or rough braking feel during everyday driving
Installation Notes
Compatible With 2007-2010 Volvo S80 front and rear brake service. The coated rotors are ready to install without additional cleaning or prep. During installation, inspect calipers, slides, and mounting points for wear, and follow the vehicle manufacturer’s brake service procedures. Proper pad bedding after installation helps promote even transfer layer formation and consistent braking performance.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected after machining, and vented rotors are electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $363.32
-65%$363.32
$127.16Description
Brake Kit for Volvo S80 Front and Rear
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit, part number 4514-27030, is a complete disc brake kit for select Volvo S80 applications. It combines coated rotors, low metallic pads, and matched brake hardware for a service-focused brake repair on 2007-2010 Volvo S80 models.
Key Features
- Fits 2007 Volvo S80, front and rear
- Fits 2008-2010 Volvo S80, front and rear
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and consistent first-stop performance
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is built for drivers servicing the Volvo S80 brake system with OE-style fit and finish. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The pads are formulated for stable friction performance, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. Part number 4514-27030 is a practical choice for a front and rear brake service on the Volvo S80.
DFC’s BrandLine focuses on a matched brake service package: coated rotors, advanced pads, and hardware designed to work together. For Volvo S80 owners searching for a front and rear brake kit, 4514-27030 provides the core components needed for a complete brake refresh without mixing unrelated parts.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Longer stopping distances from worn friction material
- Rotor rust on exposed braking surfaces
- Vibration or rough braking feel during everyday driving
Installation Notes
Compatible With 2007-2010 Volvo S80 front and rear brake service. The coated rotors are ready to install without additional cleaning or prep. During installation, inspect calipers, slides, and mounting points for wear, and follow the vehicle manufacturer’s brake service procedures. Proper pad bedding after installation helps promote even transfer layer formation and consistent braking performance.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected after machining, and vented rotors are electronically mill-balanced when required. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
