HomeStore

Dynamite Friction 4514-27029 Disc Brake Kit - Front and Rear

Product image 1

Dynamite Friction 4514-27029 Disc Brake Kit - Front and Rear

Volvo Brake Kit for Front and Rear Service

The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for select Volvo applications. It combines coated rotors, low metallic brake pads, and matching hardware for a service-focused brake repair on the front and rear axles.

Part number 4514-27029 is built for Volvo S60, S80, V60, and V70 models listed below, including applications with electric parking brake and solid rear disc notes where specified.

Key Features

  • DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
  • Rotors are processed dry and ready to install without oil removal
  • G3000/G11H18 cast iron construction for OE-style durability and stability
  • Non-directional rotor finish for more even pad bed-in and smoother braking
  • DFC 5000 Advanced low metallic brake pads with post-cured and scorched friction material
  • Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
  • Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
  • Part number 4514-27029 for front and rear brake service

Product Details

DFC GEOSPEC coated brake rotors are machined to tight tolerances and inspected for balance and critical dimensions before release. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface helps reduce prep time during installation. The 5000 Advanced brake pads are formulated for stable friction performance and quicker initial bite, and the included hardware kit addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear.

This brake kit is a practical choice for Volvo S60 brake replacement, Volvo S80 front and rear brake service, Volvo V60 brake rotor and pad replacement, and Volvo V70 brake maintenance when the goal is to restore consistent stopping performance with OE-style fit and finish. Part number 4514-27029 is also a useful search reference for shoppers comparing complete brake kits for these Volvo platforms.

What This Brake Kit Helps Address

  • Brake noise from worn pads or fatigued hardware
  • Rust buildup on exposed rotor surfaces
  • Uneven pad wear caused by corroded or weak hardware
  • Reduced braking smoothness from worn rotors
  • Longer pedal response from aged friction components

Installation Notes

  • Fits 2015-2018 Volvo V60, Front and Rear
  • Fits 2015-2017 Volvo S60, Front and Rear
  • Fits 2012 Volvo S60, Front and Rear
  • Fits 2009-2016 Volvo S80, Front and Rear
  • Fits 2009-2010 Volvo S80, Front and Rear, Electric Parking Brake compatible disc brake rotor
  • Fits 2008-2010 Volvo V70, Front and Rear
  • Fits 2008 Volvo S80, Front and Rear, Electric Parking Brake; Solid Rear Disc

Verify rotor size, rear brake configuration, and parking brake type before installation. Clean mating surfaces, follow proper torque procedures, and complete a full brake bed-in procedure after service.

Quality Assurance

DFC rotors are manufactured to OE specifications, processed through precision machining, and 100% inspected for critical attributes. Vented rotors are balance-checked and corrected when needed, and the rotors carry a 12-month warranty against defects in material and workmanship.

Volvo Brake Kit for Front and Rear Service

The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for select Volvo applications. It combines coated rotors, low metallic brake pads, and matching hardware for a service-focused brake repair on the front and rear axles.

Part number 4514-27029 is built for Volvo S60, S80, V60, and V70 models listed below, including applications with electric parking brake and solid rear disc notes where specified.

Key Features

  • DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
  • Rotors are processed dry and ready to install without oil removal
  • G3000/G11H18 cast iron construction for OE-style durability and stability
  • Non-directional rotor finish for more even pad bed-in and smoother braking
  • DFC 5000 Advanced low metallic brake pads with post-cured and scorched friction material
  • Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
  • Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
  • Part number 4514-27029 for front and rear brake service

Product Details

DFC GEOSPEC coated brake rotors are machined to tight tolerances and inspected for balance and critical dimensions before release. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface helps reduce prep time during installation. The 5000 Advanced brake pads are formulated for stable friction performance and quicker initial bite, and the included hardware kit addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear.

This brake kit is a practical choice for Volvo S60 brake replacement, Volvo S80 front and rear brake service, Volvo V60 brake rotor and pad replacement, and Volvo V70 brake maintenance when the goal is to restore consistent stopping performance with OE-style fit and finish. Part number 4514-27029 is also a useful search reference for shoppers comparing complete brake kits for these Volvo platforms.

What This Brake Kit Helps Address

  • Brake noise from worn pads or fatigued hardware
  • Rust buildup on exposed rotor surfaces
  • Uneven pad wear caused by corroded or weak hardware
  • Reduced braking smoothness from worn rotors
  • Longer pedal response from aged friction components

Installation Notes

  • Fits 2015-2018 Volvo V60, Front and Rear
  • Fits 2015-2017 Volvo S60, Front and Rear
  • Fits 2012 Volvo S60, Front and Rear
  • Fits 2009-2016 Volvo S80, Front and Rear
  • Fits 2009-2010 Volvo S80, Front and Rear, Electric Parking Brake compatible disc brake rotor
  • Fits 2008-2010 Volvo V70, Front and Rear
  • Fits 2008 Volvo S80, Front and Rear, Electric Parking Brake; Solid Rear Disc

Verify rotor size, rear brake configuration, and parking brake type before installation. Clean mating surfaces, follow proper torque procedures, and complete a full brake bed-in procedure after service.

Quality Assurance

DFC rotors are manufactured to OE specifications, processed through precision machining, and 100% inspected for critical attributes. Vented rotors are balance-checked and corrected when needed, and the rotors carry a 12-month warranty against defects in material and workmanship.

$124.61

Original: $356.02

-65%
Dynamite Friction 4514-27029 Disc Brake Kit - Front and Rear

$356.02

$124.61

Description

Volvo Brake Kit for Front and Rear Service

The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete disc brake kit for select Volvo applications. It combines coated rotors, low metallic brake pads, and matching hardware for a service-focused brake repair on the front and rear axles.

Part number 4514-27029 is built for Volvo S60, S80, V60, and V70 models listed below, including applications with electric parking brake and solid rear disc notes where specified.

Key Features

  • DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
  • Rotors are processed dry and ready to install without oil removal
  • G3000/G11H18 cast iron construction for OE-style durability and stability
  • Non-directional rotor finish for more even pad bed-in and smoother braking
  • DFC 5000 Advanced low metallic brake pads with post-cured and scorched friction material
  • Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
  • Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
  • Part number 4514-27029 for front and rear brake service

Product Details

DFC GEOSPEC coated brake rotors are machined to tight tolerances and inspected for balance and critical dimensions before release. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry-ready surface helps reduce prep time during installation. The 5000 Advanced brake pads are formulated for stable friction performance and quicker initial bite, and the included hardware kit addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear.

This brake kit is a practical choice for Volvo S60 brake replacement, Volvo S80 front and rear brake service, Volvo V60 brake rotor and pad replacement, and Volvo V70 brake maintenance when the goal is to restore consistent stopping performance with OE-style fit and finish. Part number 4514-27029 is also a useful search reference for shoppers comparing complete brake kits for these Volvo platforms.

What This Brake Kit Helps Address

  • Brake noise from worn pads or fatigued hardware
  • Rust buildup on exposed rotor surfaces
  • Uneven pad wear caused by corroded or weak hardware
  • Reduced braking smoothness from worn rotors
  • Longer pedal response from aged friction components

Installation Notes

  • Fits 2015-2018 Volvo V60, Front and Rear
  • Fits 2015-2017 Volvo S60, Front and Rear
  • Fits 2012 Volvo S60, Front and Rear
  • Fits 2009-2016 Volvo S80, Front and Rear
  • Fits 2009-2010 Volvo S80, Front and Rear, Electric Parking Brake compatible disc brake rotor
  • Fits 2008-2010 Volvo V70, Front and Rear
  • Fits 2008 Volvo S80, Front and Rear, Electric Parking Brake; Solid Rear Disc

Verify rotor size, rear brake configuration, and parking brake type before installation. Clean mating surfaces, follow proper torque procedures, and complete a full brake bed-in procedure after service.

Quality Assurance

DFC rotors are manufactured to OE specifications, processed through precision machining, and 100% inspected for critical attributes. Vented rotors are balance-checked and corrected when needed, and the rotors carry a 12-month warranty against defects in material and workmanship.