Dynamite Friction 4514-27001 Disc Brake Kit - Front and Rear
Brake Kit for OE-Style Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a disc brake service kit built for drivers who want matched rotor, pad, and hardware components in one package. Part number 4514-27001 combines coated rotors with low metallic pads for a cleaner, more complete brake service.
This kit is a practical choice for brake jobs on vehicles such as Honda Civic and Toyota Camry applications where OE-style braking feel, corrosion resistance, and consistent pad response matter. The 4514-27001 brake kit is organized for front or rear service depending on the confirmed application.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter operation
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Disc brake hardware kit designed with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
The DFC GEOSPEC rotor line focuses on coated replacement rotors that arrive dry and ready for installation, helping reduce prep time during a brake service. The 5000 Advanced pad line uses a low metallic friction formula and post-curing process to deliver stable braking performance across a wide range of driving conditions. Together, these components are paired as a service kit for a more complete brake repair.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust on exposed braking surfaces
- Longer stopping response from worn friction material
- Brake vibration related to rotor finish or uneven wear
Installation Notes
Before ordering, confirm the exact vehicle application and axle position for part number 4514-27001. This kit is intended for brake service on confirmed fitments only, and the rotor and pad set should be installed as a matched axle pair. Clean the hub mounting surface, inspect caliper condition, and follow proper torque and bedding procedures after installation.
Compatible vehicle search terms for this kit include Honda Civic brake kit, Toyota Camry disc brake kit, and OE-style coated rotor and pad service kit. If your vehicle matches the confirmed application for 4514-27001, this kit provides the rotor, pad, and hardware components needed for a complete brake service.
Quality Assurance
DFC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured and assembled with premium shims to support stable friction performance and reduced noise.
Brake Kit for OE-Style Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a disc brake service kit built for drivers who want matched rotor, pad, and hardware components in one package. Part number 4514-27001 combines coated rotors with low metallic pads for a cleaner, more complete brake service.
This kit is a practical choice for brake jobs on vehicles such as Honda Civic and Toyota Camry applications where OE-style braking feel, corrosion resistance, and consistent pad response matter. The 4514-27001 brake kit is organized for front or rear service depending on the confirmed application.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter operation
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Disc brake hardware kit designed with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
The DFC GEOSPEC rotor line focuses on coated replacement rotors that arrive dry and ready for installation, helping reduce prep time during a brake service. The 5000 Advanced pad line uses a low metallic friction formula and post-curing process to deliver stable braking performance across a wide range of driving conditions. Together, these components are paired as a service kit for a more complete brake repair.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust on exposed braking surfaces
- Longer stopping response from worn friction material
- Brake vibration related to rotor finish or uneven wear
Installation Notes
Before ordering, confirm the exact vehicle application and axle position for part number 4514-27001. This kit is intended for brake service on confirmed fitments only, and the rotor and pad set should be installed as a matched axle pair. Clean the hub mounting surface, inspect caliper condition, and follow proper torque and bedding procedures after installation.
Compatible vehicle search terms for this kit include Honda Civic brake kit, Toyota Camry disc brake kit, and OE-style coated rotor and pad service kit. If your vehicle matches the confirmed application for 4514-27001, this kit provides the rotor, pad, and hardware components needed for a complete brake service.
Quality Assurance
DFC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured and assembled with premium shims to support stable friction performance and reduced noise.
Original: $299.73
-65%$299.73
$104.91Description
Brake Kit for OE-Style Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a disc brake service kit built for drivers who want matched rotor, pad, and hardware components in one package. Part number 4514-27001 combines coated rotors with low metallic pads for a cleaner, more complete brake service.
This kit is a practical choice for brake jobs on vehicles such as Honda Civic and Toyota Camry applications where OE-style braking feel, corrosion resistance, and consistent pad response matter. The 4514-27001 brake kit is organized for front or rear service depending on the confirmed application.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Rotors are processed dry and ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-spec durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter operation
- DFC 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved NVH control
- Disc brake hardware kit designed with PTFE coating, vulcanized rubber, and stainless steel
Product Line Details
The DFC GEOSPEC rotor line focuses on coated replacement rotors that arrive dry and ready for installation, helping reduce prep time during a brake service. The 5000 Advanced pad line uses a low metallic friction formula and post-curing process to deliver stable braking performance across a wide range of driving conditions. Together, these components are paired as a service kit for a more complete brake repair.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust on exposed braking surfaces
- Longer stopping response from worn friction material
- Brake vibration related to rotor finish or uneven wear
Installation Notes
Before ordering, confirm the exact vehicle application and axle position for part number 4514-27001. This kit is intended for brake service on confirmed fitments only, and the rotor and pad set should be installed as a matched axle pair. Clean the hub mounting surface, inspect caliper condition, and follow proper torque and bedding procedures after installation.
Compatible vehicle search terms for this kit include Honda Civic brake kit, Toyota Camry disc brake kit, and OE-style coated rotor and pad service kit. If your vehicle matches the confirmed application for 4514-27001, this kit provides the rotor, pad, and hardware components needed for a complete brake service.
Quality Assurance
DFC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented designs. The rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured and assembled with premium shims to support stable friction performance and reduced noise.
