Dynamite Friction 4514-21013 Disc Brake Kit - Front and Rear
Brake Kit for Kia Rio Front and Rear
Restore braking performance on your 2012-2017 Kia Rio with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit. Part number 4514-21013 combines coated rotors, ceramic brake pads, and matching hardware for a complete brake service on the front and rear axles.
Compatible With 2012-2017 Kia Rio brake replacement needs, this kit is built for drivers looking for OE-style fitment, reduced brake noise, and corrosion-resistant rotor surfaces. The DFC 4514-21013 package is designed to simplify a full brake job on the Kia Rio while supporting consistent pedal feel and smooth stopping.
Key Features
- Complete disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter operation
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC BrandLine focuses on matched brake system components, and this kit brings together rotors, pads, and hardware engineered to work as a set. The coated rotors are processed dry and ready to install, which helps reduce prep time during brake service. Rotor castings are machined to tight tolerances, balanced where required, and inspected to OE specifications. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce vibration and noise.
Fits 2012-2017 Kia Rio, front and rear. This part number, 4514-21013, is a practical choice for a Kia Rio brake job when you want coated rotor protection, ceramic pad performance, and replacement hardware in one package. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or surface variation
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle application. The rotors are shipped dry and ready to install, so no oil removal step is needed. For best results, clean the hub mounting surface, inspect calipers and slides, and follow the recommended pad bed-in procedure after installation on the Kia Rio.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications, 100% inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built with corrosion-resistant materials for dependable service.
Brake Kit for Kia Rio Front and Rear
Restore braking performance on your 2012-2017 Kia Rio with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit. Part number 4514-21013 combines coated rotors, ceramic brake pads, and matching hardware for a complete brake service on the front and rear axles.
Compatible With 2012-2017 Kia Rio brake replacement needs, this kit is built for drivers looking for OE-style fitment, reduced brake noise, and corrosion-resistant rotor surfaces. The DFC 4514-21013 package is designed to simplify a full brake job on the Kia Rio while supporting consistent pedal feel and smooth stopping.
Key Features
- Complete disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter operation
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC BrandLine focuses on matched brake system components, and this kit brings together rotors, pads, and hardware engineered to work as a set. The coated rotors are processed dry and ready to install, which helps reduce prep time during brake service. Rotor castings are machined to tight tolerances, balanced where required, and inspected to OE specifications. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce vibration and noise.
Fits 2012-2017 Kia Rio, front and rear. This part number, 4514-21013, is a practical choice for a Kia Rio brake job when you want coated rotor protection, ceramic pad performance, and replacement hardware in one package. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or surface variation
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle application. The rotors are shipped dry and ready to install, so no oil removal step is needed. For best results, clean the hub mounting surface, inspect calipers and slides, and follow the recommended pad bed-in procedure after installation on the Kia Rio.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications, 100% inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built with corrosion-resistant materials for dependable service.
Description
Brake Kit for Kia Rio Front and Rear
Restore braking performance on your 2012-2017 Kia Rio with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit. Part number 4514-21013 combines coated rotors, ceramic brake pads, and matching hardware for a complete brake service on the front and rear axles.
Compatible With 2012-2017 Kia Rio brake replacement needs, this kit is built for drivers looking for OE-style fitment, reduced brake noise, and corrosion-resistant rotor surfaces. The DFC 4514-21013 package is designed to simplify a full brake job on the Kia Rio while supporting consistent pedal feel and smooth stopping.
Key Features
- Complete disc brake kit for front and rear service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter operation
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC BrandLine focuses on matched brake system components, and this kit brings together rotors, pads, and hardware engineered to work as a set. The coated rotors are processed dry and ready to install, which helps reduce prep time during brake service. Rotor castings are machined to tight tolerances, balanced where required, and inspected to OE specifications. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce vibration and noise.
Fits 2012-2017 Kia Rio, front and rear. This part number, 4514-21013, is a practical choice for a Kia Rio brake job when you want coated rotor protection, ceramic pad performance, and replacement hardware in one package. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or surface variation
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn friction material
- Vibration or harshness during braking
Installation Notes
Before installation, confirm rotor size and brake configuration against the vehicle application. The rotors are shipped dry and ready to install, so no oil removal step is needed. For best results, clean the hub mounting surface, inspect calipers and slides, and follow the recommended pad bed-in procedure after installation on the Kia Rio.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications, 100% inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built with corrosion-resistant materials for dependable service.
