Dynamite Friction 4514-21002 Disc Brake Kit - Front and Rear
Brake Kit for 2007-2009 Kia Sorento
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the front and rear brake service on the 2007-2009 Kia Sorento. Part number 4514-21002 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake repair.
DFC 4514-21002 is a direct-fit brake kit for Sorento owners looking for OE-style rotor finish, stable pad performance, and reduced brake noise. It is designed for front and rear service on the 2007, 2008, and 2009 Kia Sorento.
- Fits 2007-2009 Kia Sorento, front and rear
- GEOSPEC coated rotors help resist rust and arrive dry for installation
- Non-directional rotor finish supports even pad bed-in and smoother stopping
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
- Part number 4514-21002 for brake service planning and lookup
Product Details
This DFC brake service kit is engineered to match OEM-style requirements for durability, reliability, and fit. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then inspected for balance and critical dimensions. The coated finish is intended to fight corrosion better than conventional paint or zinc coatings, while the dry rotor surface saves prep time during installation. The ceramic brake pads are formulated for consistent friction and are assembled with NVH-focused shims for quieter operation. If you are servicing a 2007-2009 Kia Sorento, this kit provides the core brake components needed for a front and rear brake refresh. Part number 4514-21002 is also useful when cross-checking brake service records or ordering by reference.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Vibration or pulsation during braking from worn rotors
- Longer stopping response from aged brake components
Installation Notes and Tips
Before installation, confirm the vehicle is a 2007, 2008, or 2009 Kia Sorento with front and rear brake service requirements matching this kit. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow proper torque procedures during wheel and caliper reassembly. The coated rotor surface is ready to install dry; no additional cleaning is needed before use. After installation, perform a controlled bed-in procedure to help the pads and rotors establish even contact.
Quality Assurance
DFC states that each rotor is inspected for balance and critical dimensions, and each finished rotor is checked to meet OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction performance from the first stop.
Brake Kit for 2007-2009 Kia Sorento
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the front and rear brake service on the 2007-2009 Kia Sorento. Part number 4514-21002 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake repair.
DFC 4514-21002 is a direct-fit brake kit for Sorento owners looking for OE-style rotor finish, stable pad performance, and reduced brake noise. It is designed for front and rear service on the 2007, 2008, and 2009 Kia Sorento.
- Fits 2007-2009 Kia Sorento, front and rear
- GEOSPEC coated rotors help resist rust and arrive dry for installation
- Non-directional rotor finish supports even pad bed-in and smoother stopping
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
- Part number 4514-21002 for brake service planning and lookup
Product Details
This DFC brake service kit is engineered to match OEM-style requirements for durability, reliability, and fit. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then inspected for balance and critical dimensions. The coated finish is intended to fight corrosion better than conventional paint or zinc coatings, while the dry rotor surface saves prep time during installation. The ceramic brake pads are formulated for consistent friction and are assembled with NVH-focused shims for quieter operation. If you are servicing a 2007-2009 Kia Sorento, this kit provides the core brake components needed for a front and rear brake refresh. Part number 4514-21002 is also useful when cross-checking brake service records or ordering by reference.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Vibration or pulsation during braking from worn rotors
- Longer stopping response from aged brake components
Installation Notes and Tips
Before installation, confirm the vehicle is a 2007, 2008, or 2009 Kia Sorento with front and rear brake service requirements matching this kit. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow proper torque procedures during wheel and caliper reassembly. The coated rotor surface is ready to install dry; no additional cleaning is needed before use. After installation, perform a controlled bed-in procedure to help the pads and rotors establish even contact.
Quality Assurance
DFC states that each rotor is inspected for balance and critical dimensions, and each finished rotor is checked to meet OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction performance from the first stop.
Description
Brake Kit for 2007-2009 Kia Sorento
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the front and rear brake service on the 2007-2009 Kia Sorento. Part number 4514-21002 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake repair.
DFC 4514-21002 is a direct-fit brake kit for Sorento owners looking for OE-style rotor finish, stable pad performance, and reduced brake noise. It is designed for front and rear service on the 2007, 2008, and 2009 Kia Sorento.
- Fits 2007-2009 Kia Sorento, front and rear
- GEOSPEC coated rotors help resist rust and arrive dry for installation
- Non-directional rotor finish supports even pad bed-in and smoother stopping
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel materials
- Part number 4514-21002 for brake service planning and lookup
Product Details
This DFC brake service kit is engineered to match OEM-style requirements for durability, reliability, and fit. The rotors use G3000/G11H18 cast iron specification and are machined to tight tolerances, then inspected for balance and critical dimensions. The coated finish is intended to fight corrosion better than conventional paint or zinc coatings, while the dry rotor surface saves prep time during installation. The ceramic brake pads are formulated for consistent friction and are assembled with NVH-focused shims for quieter operation. If you are servicing a 2007-2009 Kia Sorento, this kit provides the core brake components needed for a front and rear brake refresh. Part number 4514-21002 is also useful when cross-checking brake service records or ordering by reference.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rotor rust buildup on exposed braking surfaces
- Vibration or pulsation during braking from worn rotors
- Longer stopping response from aged brake components
Installation Notes and Tips
Before installation, confirm the vehicle is a 2007, 2008, or 2009 Kia Sorento with front and rear brake service requirements matching this kit. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow proper torque procedures during wheel and caliper reassembly. The coated rotor surface is ready to install dry; no additional cleaning is needed before use. After installation, perform a controlled bed-in procedure to help the pads and rotors establish even contact.
Quality Assurance
DFC states that each rotor is inspected for balance and critical dimensions, and each finished rotor is checked to meet OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched to support stable friction performance from the first stop.
