Dynamite Friction 4514-21001 Disc Brake Kit - Front and Rear
Brake Kit for 2003-2006 Kia Sorento
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the 2003-2006 Kia Sorento, front and rear. Part number 4514-21001 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a complete brake refresh.
For Kia Sorento brake service, this kit brings together rotor, pad, and hardware components selected to work as a matched set. It is a practical choice for drivers looking for OE-style brake replacement with corrosion protection and consistent pedal response.
Key Features
- Fits 2003-2006 Kia Sorento, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-21001 for easy identification
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and built from G3000/G11H18 cast iron specification to align with OE durability and stability targets. The coated surface is designed to resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry and ready for installation. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware addresses worn or corroded brake clips and related contact points. If you are searching for 2003-2006 Kia Sorento front and rear brake rotors and pads, part number 4514-21001 is a direct service-kit solution.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven pad wear caused by corroded hardware
- Reduced stopping consistency from aged brake components
- Longer service time caused by unprepared rotors
Installation Notes
Before installation, confirm the vehicle is a 2003-2006 Kia Sorento with front and rear brake service requirements matching this kit. Clean all mating surfaces, inspect calipers and slides, and follow proper bedding procedures after installation. The dry rotor finish helps reduce prep time, and the non-directional machining supports even pad seating.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-21001 is engineered as a complete brake service kit for dependable OE-style replacement on the Kia Sorento.
Brake Kit for 2003-2006 Kia Sorento
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the 2003-2006 Kia Sorento, front and rear. Part number 4514-21001 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a complete brake refresh.
For Kia Sorento brake service, this kit brings together rotor, pad, and hardware components selected to work as a matched set. It is a practical choice for drivers looking for OE-style brake replacement with corrosion protection and consistent pedal response.
Key Features
- Fits 2003-2006 Kia Sorento, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-21001 for easy identification
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and built from G3000/G11H18 cast iron specification to align with OE durability and stability targets. The coated surface is designed to resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry and ready for installation. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware addresses worn or corroded brake clips and related contact points. If you are searching for 2003-2006 Kia Sorento front and rear brake rotors and pads, part number 4514-21001 is a direct service-kit solution.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven pad wear caused by corroded hardware
- Reduced stopping consistency from aged brake components
- Longer service time caused by unprepared rotors
Installation Notes
Before installation, confirm the vehicle is a 2003-2006 Kia Sorento with front and rear brake service requirements matching this kit. Clean all mating surfaces, inspect calipers and slides, and follow proper bedding procedures after installation. The dry rotor finish helps reduce prep time, and the non-directional machining supports even pad seating.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-21001 is engineered as a complete brake service kit for dependable OE-style replacement on the Kia Sorento.
Description
Brake Kit for 2003-2006 Kia Sorento
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for the 2003-2006 Kia Sorento, front and rear. Part number 4514-21001 combines coated rotors, ceramic brake pads, and brake hardware in one service kit for a complete brake refresh.
For Kia Sorento brake service, this kit brings together rotor, pad, and hardware components selected to work as a matched set. It is a practical choice for drivers looking for OE-style brake replacement with corrosion protection and consistent pedal response.
Key Features
- Fits 2003-2006 Kia Sorento, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-21001 for easy identification
Product Details
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and built from G3000/G11H18 cast iron specification to align with OE durability and stability targets. The coated surface is designed to resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry and ready for installation. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware addresses worn or corroded brake clips and related contact points. If you are searching for 2003-2006 Kia Sorento front and rear brake rotors and pads, part number 4514-21001 is a direct service-kit solution.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on rotor surfaces
- Uneven pad wear caused by corroded hardware
- Reduced stopping consistency from aged brake components
- Longer service time caused by unprepared rotors
Installation Notes
Before installation, confirm the vehicle is a 2003-2006 Kia Sorento with front and rear brake service requirements matching this kit. Clean all mating surfaces, inspect calipers and slides, and follow proper bedding procedures after installation. The dry rotor finish helps reduce prep time, and the non-directional machining supports even pad seating.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, with vented rotors corrected as needed during the balancing process. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-21001 is engineered as a complete brake service kit for dependable OE-style replacement on the Kia Sorento.
