Dynamite Friction 4514-16001 Disc Brake Kit - Front and Rear
Brake Kit for OE-Style Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit combines coated rotors, advanced ceramic pads, and brake hardware in one service package. Part number 4514-16001 is built for drivers and technicians who want a complete disc brake kit with OE-style fit, stable friction, and corrosion-resistant rotor surfaces.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Rubber-steel-rubber shims help control noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are post cured for stability. The pads are also scorched to remove uncured bonding agents, which helps the braking surface begin working sooner after installation. DFC pairs the pads with premium shims to improve NVH control on daily-driven vehicles such as Honda Civic and Toyota Camry applications where quiet, predictable braking matters.
The GEOSPEC coated rotors are machined to tight tolerances from G3000/G11H18 cast iron and inspected for critical dimensions and balance. The coating helps resist rust better than conventional paint or zinc finishes, and the dry packaging means the rotors are ready for installation without cleaning off oil. Part number 4514-16001 is a practical choice for brake service on vehicles that need dependable stopping performance and cleaner rotor appearance.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise during stops
- Uneven pad wear from worn hardware
- Rotor rust and surface corrosion
- Longer pedal response after brake service
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With service applications that require rotor, pad, and hardware replacement at the same axle. Inspect calipers, slides, and mounting points before assembly, and clean the hub face to help prevent rotor runout. Follow the vehicle manufacturer’s brake bedding procedure after installation. Fits 2006-2011 Honda Civic, front; Fits 2007-2011 Toyota Camry, front.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post cured and assembled with premium shims for consistent performance and NVH control.
Brake Kit for OE-Style Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit combines coated rotors, advanced ceramic pads, and brake hardware in one service package. Part number 4514-16001 is built for drivers and technicians who want a complete disc brake kit with OE-style fit, stable friction, and corrosion-resistant rotor surfaces.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Rubber-steel-rubber shims help control noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are post cured for stability. The pads are also scorched to remove uncured bonding agents, which helps the braking surface begin working sooner after installation. DFC pairs the pads with premium shims to improve NVH control on daily-driven vehicles such as Honda Civic and Toyota Camry applications where quiet, predictable braking matters.
The GEOSPEC coated rotors are machined to tight tolerances from G3000/G11H18 cast iron and inspected for critical dimensions and balance. The coating helps resist rust better than conventional paint or zinc finishes, and the dry packaging means the rotors are ready for installation without cleaning off oil. Part number 4514-16001 is a practical choice for brake service on vehicles that need dependable stopping performance and cleaner rotor appearance.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise during stops
- Uneven pad wear from worn hardware
- Rotor rust and surface corrosion
- Longer pedal response after brake service
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With service applications that require rotor, pad, and hardware replacement at the same axle. Inspect calipers, slides, and mounting points before assembly, and clean the hub face to help prevent rotor runout. Follow the vehicle manufacturer’s brake bedding procedure after installation. Fits 2006-2011 Honda Civic, front; Fits 2007-2011 Toyota Camry, front.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post cured and assembled with premium shims for consistent performance and NVH control.
Description
Brake Kit for OE-Style Service
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit combines coated rotors, advanced ceramic pads, and brake hardware in one service package. Part number 4514-16001 is built for drivers and technicians who want a complete disc brake kit with OE-style fit, stable friction, and corrosion-resistant rotor surfaces.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads help reduce initial break-in time
- Rubber-steel-rubber shims help control noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC 5000 Advanced Brake Pads are formulated for consistent friction performance and are post cured for stability. The pads are also scorched to remove uncured bonding agents, which helps the braking surface begin working sooner after installation. DFC pairs the pads with premium shims to improve NVH control on daily-driven vehicles such as Honda Civic and Toyota Camry applications where quiet, predictable braking matters.
The GEOSPEC coated rotors are machined to tight tolerances from G3000/G11H18 cast iron and inspected for critical dimensions and balance. The coating helps resist rust better than conventional paint or zinc finishes, and the dry packaging means the rotors are ready for installation without cleaning off oil. Part number 4514-16001 is a practical choice for brake service on vehicles that need dependable stopping performance and cleaner rotor appearance.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake noise during stops
- Uneven pad wear from worn hardware
- Rotor rust and surface corrosion
- Longer pedal response after brake service
- Vibration or harshness during braking
Installation Notes and Tips
Compatible With service applications that require rotor, pad, and hardware replacement at the same axle. Inspect calipers, slides, and mounting points before assembly, and clean the hub face to help prevent rotor runout. Follow the vehicle manufacturer’s brake bedding procedure after installation. Fits 2006-2011 Honda Civic, front; Fits 2007-2011 Toyota Camry, front.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post cured and assembled with premium shims for consistent performance and NVH control.
