Dynamite Friction 4514-13038 Disc Brake Kit - Front and Rear
Brake Kit for Subaru Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2012-2016 Subaru Impreza front and rear brake service. Part number 4514-13038 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
For Subaru Impreza owners looking for an OE-style brake kit with corrosion protection and consistent pedal feel, this package is designed around rotor finish, pad stability, and hardware fitment. The result is a practical solution for routine brake replacement on the 2012-2016 Subaru Impreza.
Key Features
- Fits 2012-2016 Subaru Impreza, front and rear
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pads help reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Rotors are machined to tight tolerances with a non-directional finish for smoother bed-in
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-13038
Product Details
DFC’s GEOSPEC coated rotors are processed dry and ready to install, which helps reduce prep time during brake service. They are made to G3000/G11H18 cast iron specifications and finished to OE-style standards for durability, reliability, and stability. The non-directional surface supports even pad bedding and quieter operation, while balance inspection on vented rotors helps maintain smooth braking.
The 5000 Advanced ceramic pads are formulated for modern vehicle braking demands and assembled with noise-reducing shims. The included hardware kit is designed to replace worn or corroded brake hardware that can contribute to uneven wear, caliper movement, and brake noise. Part number 4514-13038 is a complete brake service kit for the Subaru Impreza platform listed below.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by aged hardware components
- Reduced braking smoothness from worn rotors
- Longer brake service time due to unprepared rotor surfaces
Installation Notes
Compatible With 2012-2016 Subaru Impreza front and rear brake service. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly. Verify pad seating and perform a proper bed-in procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and every rotor includes a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is built with corrosion-resistant materials for consistent service life. Part number 4514-13038 is engineered as a complete brake kit for Subaru Impreza applications.
Brake Kit for Subaru Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2012-2016 Subaru Impreza front and rear brake service. Part number 4514-13038 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
For Subaru Impreza owners looking for an OE-style brake kit with corrosion protection and consistent pedal feel, this package is designed around rotor finish, pad stability, and hardware fitment. The result is a practical solution for routine brake replacement on the 2012-2016 Subaru Impreza.
Key Features
- Fits 2012-2016 Subaru Impreza, front and rear
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pads help reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Rotors are machined to tight tolerances with a non-directional finish for smoother bed-in
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-13038
Product Details
DFC’s GEOSPEC coated rotors are processed dry and ready to install, which helps reduce prep time during brake service. They are made to G3000/G11H18 cast iron specifications and finished to OE-style standards for durability, reliability, and stability. The non-directional surface supports even pad bedding and quieter operation, while balance inspection on vented rotors helps maintain smooth braking.
The 5000 Advanced ceramic pads are formulated for modern vehicle braking demands and assembled with noise-reducing shims. The included hardware kit is designed to replace worn or corroded brake hardware that can contribute to uneven wear, caliper movement, and brake noise. Part number 4514-13038 is a complete brake service kit for the Subaru Impreza platform listed below.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by aged hardware components
- Reduced braking smoothness from worn rotors
- Longer brake service time due to unprepared rotor surfaces
Installation Notes
Compatible With 2012-2016 Subaru Impreza front and rear brake service. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly. Verify pad seating and perform a proper bed-in procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and every rotor includes a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is built with corrosion-resistant materials for consistent service life. Part number 4514-13038 is engineered as a complete brake kit for Subaru Impreza applications.
Original: $283.86
-65%$283.86
$99.35Description
Brake Kit for Subaru Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2012-2016 Subaru Impreza front and rear brake service. Part number 4514-13038 combines coated rotors, ceramic pads, and brake hardware in one service kit for a complete brake refresh.
For Subaru Impreza owners looking for an OE-style brake kit with corrosion protection and consistent pedal feel, this package is designed around rotor finish, pad stability, and hardware fitment. The result is a practical solution for routine brake replacement on the 2012-2016 Subaru Impreza.
Key Features
- Fits 2012-2016 Subaru Impreza, front and rear
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pads help reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Rotors are machined to tight tolerances with a non-directional finish for smoother bed-in
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4514-13038
Product Details
DFC’s GEOSPEC coated rotors are processed dry and ready to install, which helps reduce prep time during brake service. They are made to G3000/G11H18 cast iron specifications and finished to OE-style standards for durability, reliability, and stability. The non-directional surface supports even pad bedding and quieter operation, while balance inspection on vented rotors helps maintain smooth braking.
The 5000 Advanced ceramic pads are formulated for modern vehicle braking demands and assembled with noise-reducing shims. The included hardware kit is designed to replace worn or corroded brake hardware that can contribute to uneven wear, caliper movement, and brake noise. Part number 4514-13038 is a complete brake service kit for the Subaru Impreza platform listed below.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by aged hardware components
- Reduced braking smoothness from worn rotors
- Longer brake service time due to unprepared rotor surfaces
Installation Notes
Compatible With 2012-2016 Subaru Impreza front and rear brake service. Clean the hub mounting surface before installation and follow the vehicle manufacturer’s torque specifications. Because the rotors are shipped dry and ready to install, no additional rotor preparation is required before assembly. Verify pad seating and perform a proper bed-in procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and every rotor includes a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is built with corrosion-resistant materials for consistent service life. Part number 4514-13038 is engineered as a complete brake kit for Subaru Impreza applications.
