Dynamite Friction 4514-13034 Disc Brake Kit - Front and Rear
Brake Kit for 2015 Subaru Legacy
Built for the 2015 Subaru Legacy, this DFC disc brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware in one service package. It is a front and rear brake solution for drivers looking to restore braking performance with OE-style fitment and corrosion protection.
Key Features
- Part number 4514-13034
- Compatible with 2015 Subaru Legacy, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Dry-processed rotors arrive ready to install
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is engineered as a complete brake service package for the 2015 Subaru Legacy. DFC 5000 Advanced pads are post-cured for stable friction performance and scorched to reduce uncured bonding agents, helping deliver consistent stopping response from the first stop. Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control.
The GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry so they are ready for installation without extra cleaning. Part number 4514-13034 is a direct service choice for Subaru Legacy brake maintenance when front and rear components need to be replaced together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes and Tips
Compatible With 2015 Subaru Legacy, front and rear. Inspect calipers, slides, and brake fluid condition before assembly. Clean the hub mounting surface thoroughly to reduce rotor runout concerns, and follow proper pad bedding procedures after installation. The dry rotor finish does not require pre-cleaning before service.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-13034 is built to OE-style specifications for durability, reliability, and stable braking performance.
Brake Kit for 2015 Subaru Legacy
Built for the 2015 Subaru Legacy, this DFC disc brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware in one service package. It is a front and rear brake solution for drivers looking to restore braking performance with OE-style fitment and corrosion protection.
Key Features
- Part number 4514-13034
- Compatible with 2015 Subaru Legacy, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Dry-processed rotors arrive ready to install
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is engineered as a complete brake service package for the 2015 Subaru Legacy. DFC 5000 Advanced pads are post-cured for stable friction performance and scorched to reduce uncured bonding agents, helping deliver consistent stopping response from the first stop. Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control.
The GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry so they are ready for installation without extra cleaning. Part number 4514-13034 is a direct service choice for Subaru Legacy brake maintenance when front and rear components need to be replaced together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes and Tips
Compatible With 2015 Subaru Legacy, front and rear. Inspect calipers, slides, and brake fluid condition before assembly. Clean the hub mounting surface thoroughly to reduce rotor runout concerns, and follow proper pad bedding procedures after installation. The dry rotor finish does not require pre-cleaning before service.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-13034 is built to OE-style specifications for durability, reliability, and stable braking performance.
Original: $374.28
-65%$374.28
$131.00Description
Brake Kit for 2015 Subaru Legacy
Built for the 2015 Subaru Legacy, this DFC disc brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware in one service package. It is a front and rear brake solution for drivers looking to restore braking performance with OE-style fitment and corrosion protection.
Key Features
- Part number 4514-13034
- Compatible with 2015 Subaru Legacy, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Dry-processed rotors arrive ready to install
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is engineered as a complete brake service package for the 2015 Subaru Legacy. DFC 5000 Advanced pads are post-cured for stable friction performance and scorched to reduce uncured bonding agents, helping deliver consistent stopping response from the first stop. Premium rubber-steel-rubber shims are used to improve noise, vibration, and harshness control.
The GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface to support even pad contact. The coating is designed to resist rust better than conventional paint or zinc finishes, and the rotors are shipped dry so they are ready for installation without extra cleaning. Part number 4514-13034 is a direct service choice for Subaru Legacy brake maintenance when front and rear components need to be replaced together.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes and Tips
Compatible With 2015 Subaru Legacy, front and rear. Inspect calipers, slides, and brake fluid condition before assembly. Clean the hub mounting surface thoroughly to reduce rotor runout concerns, and follow proper pad bedding procedures after installation. The dry rotor finish does not require pre-cleaning before service.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4514-13034 is built to OE-style specifications for durability, reliability, and stable braking performance.
