Dynamite Friction 4514-13024 Disc Brake Kit - Front and Rear
Brake Kit for 2004 Subaru Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete front and rear brake service kit for the 2004 Subaru Impreza. It combines coated rotors, low-metallic pads, and brake hardware in one package for a direct brake refresh.
Key Features
- Fits 2004 Subaru Impreza, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-13024
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent pedal feel. The pads are post-cured and scorched to remove uncured bonding agents, which helps reduce the initial break-in period. DFC GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. The coated surface helps resist rust, while the cast iron construction is built to OE specifications for durability and stability. The included hardware kit is designed to restore proper spring tension and caliper movement during brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and friction material
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
For a proper brake service on the 2004 Subaru Impreza, inspect calipers, slides, and mounting points before installation. Clean the hub surface, verify rotor seating, and follow the vehicle manufacturer’s torque specifications. After installation, perform a controlled bed-in procedure to help the pads and rotors mate evenly. Part number 4514-13024 is intended for front and rear brake service on the listed vehicle application.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and the rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for 2004 Subaru Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete front and rear brake service kit for the 2004 Subaru Impreza. It combines coated rotors, low-metallic pads, and brake hardware in one package for a direct brake refresh.
Key Features
- Fits 2004 Subaru Impreza, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-13024
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent pedal feel. The pads are post-cured and scorched to remove uncured bonding agents, which helps reduce the initial break-in period. DFC GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. The coated surface helps resist rust, while the cast iron construction is built to OE specifications for durability and stability. The included hardware kit is designed to restore proper spring tension and caliper movement during brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and friction material
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
For a proper brake service on the 2004 Subaru Impreza, inspect calipers, slides, and mounting points before installation. Clean the hub surface, verify rotor seating, and follow the vehicle manufacturer’s torque specifications. After installation, perform a controlled bed-in procedure to help the pads and rotors mate evenly. Part number 4514-13024 is intended for front and rear brake service on the listed vehicle application.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and the rotors include a 12-month warranty against defects in material and workmanship.
Original: $426.98
-65%$426.98
$149.44Description
Brake Kit for 2004 Subaru Impreza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is a complete front and rear brake service kit for the 2004 Subaru Impreza. It combines coated rotors, low-metallic pads, and brake hardware in one package for a direct brake refresh.
Key Features
- Fits 2004 Subaru Impreza, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low-metallic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-13024
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent pedal feel. The pads are post-cured and scorched to remove uncured bonding agents, which helps reduce the initial break-in period. DFC GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. The coated surface helps resist rust, while the cast iron construction is built to OE specifications for durability and stability. The included hardware kit is designed to restore proper spring tension and caliper movement during brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and friction material
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
For a proper brake service on the 2004 Subaru Impreza, inspect calipers, slides, and mounting points before installation. Clean the hub surface, verify rotor seating, and follow the vehicle manufacturer’s torque specifications. After installation, perform a controlled bed-in procedure to help the pads and rotors mate evenly. Part number 4514-13024 is intended for front and rear brake service on the listed vehicle application.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and the rotors include a 12-month warranty against defects in material and workmanship.
