Dynamite Friction 4514-13021 Disc Brake Kit - Front and Rear
Brake Kit for Subaru Baja
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete brake service solution for the 2004-2006 Subaru Baja, front and rear. It combines coated rotors, ceramic brake pads, and matched hardware for a direct replacement setup built around OE-style fitment and braking consistency.
- Fits 2004-2006 Subaru Baja, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-13021
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the main wear components into one application-specific package. The GEOSPEC rotor line focuses on corrosion protection and OE-style machining, while the 5000 Advanced pad formulation is built for stable friction performance and quieter operation. Together, these components are aimed at drivers servicing a Subaru Baja brake job with matched parts from one system.
Detailed Description
This brake kit is engineered for the Subaru Baja and is listed for front and rear service on 2004, 2005, and 2006 models. The coated rotors are processed dry and ready to install, which helps reduce prep time during brake replacement. The rotor castings use G3000/G11H18 cast iron and are machined to tight tolerances with balance inspection on vented rotors. The pads are post-cured, scorched, and paired with premium shims to support consistent pedal feel and quieter stops. Part number 4514-13021 is a practical choice when replacing worn brake components on a 2004-2006 Subaru Baja.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or surface irregularities
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from depleted friction material
- Caliper movement concerns related to aged hardware
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean the hub mounting surface thoroughly so the coated rotors seat flat, and follow the vehicle manufacturer’s torque specifications during assembly. The rotors are ready to install dry, and the coating will wear away naturally in the pad sweep area during normal use. Verify fitment by year, make, model, and position before beginning the brake service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and OE-spec compliance, and the rotor set includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built with OE-style attention to form, fit, and function.
Brake Kit for Subaru Baja
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete brake service solution for the 2004-2006 Subaru Baja, front and rear. It combines coated rotors, ceramic brake pads, and matched hardware for a direct replacement setup built around OE-style fitment and braking consistency.
- Fits 2004-2006 Subaru Baja, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-13021
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the main wear components into one application-specific package. The GEOSPEC rotor line focuses on corrosion protection and OE-style machining, while the 5000 Advanced pad formulation is built for stable friction performance and quieter operation. Together, these components are aimed at drivers servicing a Subaru Baja brake job with matched parts from one system.
Detailed Description
This brake kit is engineered for the Subaru Baja and is listed for front and rear service on 2004, 2005, and 2006 models. The coated rotors are processed dry and ready to install, which helps reduce prep time during brake replacement. The rotor castings use G3000/G11H18 cast iron and are machined to tight tolerances with balance inspection on vented rotors. The pads are post-cured, scorched, and paired with premium shims to support consistent pedal feel and quieter stops. Part number 4514-13021 is a practical choice when replacing worn brake components on a 2004-2006 Subaru Baja.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or surface irregularities
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from depleted friction material
- Caliper movement concerns related to aged hardware
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean the hub mounting surface thoroughly so the coated rotors seat flat, and follow the vehicle manufacturer’s torque specifications during assembly. The rotors are ready to install dry, and the coating will wear away naturally in the pad sweep area during normal use. Verify fitment by year, make, model, and position before beginning the brake service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and OE-spec compliance, and the rotor set includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built with OE-style attention to form, fit, and function.
Description
Brake Kit for Subaru Baja
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a complete brake service solution for the 2004-2006 Subaru Baja, front and rear. It combines coated rotors, ceramic brake pads, and matched hardware for a direct replacement setup built around OE-style fitment and braking consistency.
- Fits 2004-2006 Subaru Baja, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4514-13021
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the main wear components into one application-specific package. The GEOSPEC rotor line focuses on corrosion protection and OE-style machining, while the 5000 Advanced pad formulation is built for stable friction performance and quieter operation. Together, these components are aimed at drivers servicing a Subaru Baja brake job with matched parts from one system.
Detailed Description
This brake kit is engineered for the Subaru Baja and is listed for front and rear service on 2004, 2005, and 2006 models. The coated rotors are processed dry and ready to install, which helps reduce prep time during brake replacement. The rotor castings use G3000/G11H18 cast iron and are machined to tight tolerances with balance inspection on vented rotors. The pads are post-cured, scorched, and paired with premium shims to support consistent pedal feel and quieter stops. Part number 4514-13021 is a practical choice when replacing worn brake components on a 2004-2006 Subaru Baja.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven braking caused by rotor wear or surface irregularities
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from depleted friction material
- Caliper movement concerns related to aged hardware
Installation Notes and Tips
Inspect calipers, slides, and brake hoses before installation. Clean the hub mounting surface thoroughly so the coated rotors seat flat, and follow the vehicle manufacturer’s torque specifications during assembly. The rotors are ready to install dry, and the coating will wear away naturally in the pad sweep area during normal use. Verify fitment by year, make, model, and position before beginning the brake service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and OE-spec compliance, and the rotor set includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured for stable friction performance, and the hardware kit is built with OE-style attention to form, fit, and function.
