Dynamite Friction 4514-11010 Disc Brake Kit - Front and Rear
Brake Kit for 2010-2013 Range Rover Sport
This Dynamite Friction disc brake kit combines GEOSPEC coated rotors, 5000 Advanced low metallic brake pads, and a hardware kit for the front and rear of select Land Rover Range Rover Sport models. It is built for drivers looking for an OE-style brake service package with corrosion-resistant rotors and stable pad performance.
Fits 2010-2013 Land Rover Range Rover Sport, front and rear, excluding MHEV and PHEV hybrid models and Brembo front calipers. Part number 4514-11010 is a direct-fit service kit for this application.
Key Features
- Complete disc brake kit with rotors, pads, and hardware kit
- GEOSPEC coated rotors with a silver-gray finish for improved rust resistance
- 5000 Advanced low metallic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Machined to OE-style tolerances and 100% inspected
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is engineered for drivers who want a coordinated brake service solution for the Land Rover Range Rover Sport. The rotors are cast from G3000/G11H18 iron, machined to tight tolerances, and finished with a dry, ready-to-install coating that helps resist corrosion without requiring extra prep. The pads are formulated for stable friction, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4514-11010 is designed to simplify brake replacement on 2010-2013 Range Rover Sport front and rear applications.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Brake pulsation or rough braking feel from rotor wear
Installation Notes and Tips
Verify vehicle configuration before ordering: this kit is for 2010-2013 Land Rover Range Rover Sport models with standard front calipers, excluding MHEV, PHEV, and Brembo front caliper applications. Clean installation surfaces thoroughly, inspect calipers and slides, and follow proper pad bedding procedures after installation. The rotors are shipped dry and ready to install.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for 2010-2013 Range Rover Sport
This Dynamite Friction disc brake kit combines GEOSPEC coated rotors, 5000 Advanced low metallic brake pads, and a hardware kit for the front and rear of select Land Rover Range Rover Sport models. It is built for drivers looking for an OE-style brake service package with corrosion-resistant rotors and stable pad performance.
Fits 2010-2013 Land Rover Range Rover Sport, front and rear, excluding MHEV and PHEV hybrid models and Brembo front calipers. Part number 4514-11010 is a direct-fit service kit for this application.
Key Features
- Complete disc brake kit with rotors, pads, and hardware kit
- GEOSPEC coated rotors with a silver-gray finish for improved rust resistance
- 5000 Advanced low metallic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Machined to OE-style tolerances and 100% inspected
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is engineered for drivers who want a coordinated brake service solution for the Land Rover Range Rover Sport. The rotors are cast from G3000/G11H18 iron, machined to tight tolerances, and finished with a dry, ready-to-install coating that helps resist corrosion without requiring extra prep. The pads are formulated for stable friction, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4514-11010 is designed to simplify brake replacement on 2010-2013 Range Rover Sport front and rear applications.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Brake pulsation or rough braking feel from rotor wear
Installation Notes and Tips
Verify vehicle configuration before ordering: this kit is for 2010-2013 Land Rover Range Rover Sport models with standard front calipers, excluding MHEV, PHEV, and Brembo front caliper applications. Clean installation surfaces thoroughly, inspect calipers and slides, and follow proper pad bedding procedures after installation. The rotors are shipped dry and ready to install.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship.
Original: $599.35
-65%$599.35
$209.77Description
Brake Kit for 2010-2013 Range Rover Sport
This Dynamite Friction disc brake kit combines GEOSPEC coated rotors, 5000 Advanced low metallic brake pads, and a hardware kit for the front and rear of select Land Rover Range Rover Sport models. It is built for drivers looking for an OE-style brake service package with corrosion-resistant rotors and stable pad performance.
Fits 2010-2013 Land Rover Range Rover Sport, front and rear, excluding MHEV and PHEV hybrid models and Brembo front calipers. Part number 4514-11010 is a direct-fit service kit for this application.
Key Features
- Complete disc brake kit with rotors, pads, and hardware kit
- GEOSPEC coated rotors with a silver-gray finish for improved rust resistance
- 5000 Advanced low metallic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Machined to OE-style tolerances and 100% inspected
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit is engineered for drivers who want a coordinated brake service solution for the Land Rover Range Rover Sport. The rotors are cast from G3000/G11H18 iron, machined to tight tolerances, and finished with a dry, ready-to-install coating that helps resist corrosion without requiring extra prep. The pads are formulated for stable friction, while the included hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4514-11010 is designed to simplify brake replacement on 2010-2013 Range Rover Sport front and rear applications.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn rotors and pads
- Rust buildup on exposed rotor surfaces
- Brake pulsation or rough braking feel from rotor wear
Installation Notes and Tips
Verify vehicle configuration before ordering: this kit is for 2010-2013 Land Rover Range Rover Sport models with standard front calipers, excluding MHEV, PHEV, and Brembo front caliper applications. Clean installation surfaces thoroughly, inspect calipers and slides, and follow proper pad bedding procedures after installation. The rotors are shipped dry and ready to install.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship.
