Dynamite Friction 4514-03091 Disc Brake Kit - Front and Rear
Brake Kit for Kia Seltos and Hyundai Kona
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Kia Seltos and Hyundai Kona applications. Part number 4514-03091 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Disc brake kit for front and rear service
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware, part number 4514-03091, is engineered for drivers servicing brake systems on the 2021-2026 Kia Seltos and 2018-2023 Hyundai Kona. The rotor coating is designed to resist rust better than conventional painted or zinc-coated surfaces, while the dry-ready finish eliminates the need to clean oil from the rotor before installation. The pads are formulated for stable friction performance and quieter operation, and the hardware kit is built to restore proper spring tension and caliper movement during brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping response from worn friction components
- Rotor rust and surface corrosion on daily-driven vehicles
- Brake vibration related to rotor finish or balance issues
Installation Notes
Fits 2021-2026 Kia Seltos, front and rear. Fits 2018-2023 Hyundai Kona, front and rear. This kit is intended for complete brake service on the listed axle positions. The rotors are supplied dry and ready for installation, and the non-directional finish supports a more even pad bed-in after service. Verify vehicle configuration before ordering and follow OE service procedures during installation.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent friction and NVH control.
Brake Kit for Kia Seltos and Hyundai Kona
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Kia Seltos and Hyundai Kona applications. Part number 4514-03091 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Disc brake kit for front and rear service
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware, part number 4514-03091, is engineered for drivers servicing brake systems on the 2021-2026 Kia Seltos and 2018-2023 Hyundai Kona. The rotor coating is designed to resist rust better than conventional painted or zinc-coated surfaces, while the dry-ready finish eliminates the need to clean oil from the rotor before installation. The pads are formulated for stable friction performance and quieter operation, and the hardware kit is built to restore proper spring tension and caliper movement during brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping response from worn friction components
- Rotor rust and surface corrosion on daily-driven vehicles
- Brake vibration related to rotor finish or balance issues
Installation Notes
Fits 2021-2026 Kia Seltos, front and rear. Fits 2018-2023 Hyundai Kona, front and rear. This kit is intended for complete brake service on the listed axle positions. The rotors are supplied dry and ready for installation, and the non-directional finish supports a more even pad bed-in after service. Verify vehicle configuration before ordering and follow OE service procedures during installation.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent friction and NVH control.
Original: $289.32
-65%$289.32
$101.26Description
Brake Kit for Kia Seltos and Hyundai Kona
The Dynamite Friction DFC Geospec Rotors with 5000 Advanced Brake Pads kit is built for front and rear brake service on select Kia Seltos and Hyundai Kona applications. Part number 4514-03091 combines coated rotors, advanced friction pads, and brake hardware in one service kit for a complete brake refresh.
Key Features
- Disc brake kit for front and rear service
- DFC 5000 Advanced Brake Pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- DFC GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ship ready to install
- G3000/G11H18 cast iron rotor specification for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and quieter stops
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware, part number 4514-03091, is engineered for drivers servicing brake systems on the 2021-2026 Kia Seltos and 2018-2023 Hyundai Kona. The rotor coating is designed to resist rust better than conventional painted or zinc-coated surfaces, while the dry-ready finish eliminates the need to clean oil from the rotor before installation. The pads are formulated for stable friction performance and quieter operation, and the hardware kit is built to restore proper spring tension and caliper movement during brake service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping response from worn friction components
- Rotor rust and surface corrosion on daily-driven vehicles
- Brake vibration related to rotor finish or balance issues
Installation Notes
Fits 2021-2026 Kia Seltos, front and rear. Fits 2018-2023 Hyundai Kona, front and rear. This kit is intended for complete brake service on the listed axle positions. The rotors are supplied dry and ready for installation, and the non-directional finish supports a more even pad bed-in after service. Verify vehicle configuration before ordering and follow OE service procedures during installation.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced Brake Pads are post-cured, scorched, and assembled with premium shims to support consistent friction and NVH control.
