Dynamite Friction 4514-03021 Disc Brake Kit - Front and Rear
Brake Kit for Kia Cadenza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2014-2016 Kia Cadenza front and rear brake service. Part number 4514-03021 combines coated rotors, ceramic pads, and brake hardware in one disc brake kit for a complete axle refresh.
- Compatible with 2014-2016 Kia Cadenza front and rear brake applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry, ready-to-install rotor coating reduces prep time during brake service
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Rotor machining includes a non-directional finish for smoother pad bed-in
Product Line Details
The DFC GEOSPEC rotor line is designed for OE-style durability and fit, using G3000/G11H18 cast iron and tight machining tolerances. The 5000 Advanced Brake Pads line focuses on consistent friction behavior, reduced break-in time, and quieter operation through post-curing, scorching, and shim construction. Together, these components create a service kit aimed at restoring braking performance on the Kia Cadenza while addressing wear, noise, and corrosion concerns.
This part number 4514-03021 is a direct fit for Kia Cadenza brake service where a front and rear disc brake kit is required. It is also a practical choice for drivers searching for a 2014-2016 Kia Cadenza brake rotor and pad kit, or a coated rotor and ceramic pad set for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn friction material
- Rotor rust and surface corrosion on daily-driven vehicles
- Vibration or harshness during braking
Installation Notes
For best results, inspect calipers, slides, and hub surfaces before installation. The rotors are processed dry and ready to install, so no oil removal is required before service. Follow proper brake bedding procedures after installation to help the pads and rotors seat evenly. This kit is listed for 2014-2016 Kia Cadenza front and rear use, including electric parking brake compatible disc brake rotor applications noted by the manufacturer.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for Kia Cadenza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2014-2016 Kia Cadenza front and rear brake service. Part number 4514-03021 combines coated rotors, ceramic pads, and brake hardware in one disc brake kit for a complete axle refresh.
- Compatible with 2014-2016 Kia Cadenza front and rear brake applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry, ready-to-install rotor coating reduces prep time during brake service
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Rotor machining includes a non-directional finish for smoother pad bed-in
Product Line Details
The DFC GEOSPEC rotor line is designed for OE-style durability and fit, using G3000/G11H18 cast iron and tight machining tolerances. The 5000 Advanced Brake Pads line focuses on consistent friction behavior, reduced break-in time, and quieter operation through post-curing, scorching, and shim construction. Together, these components create a service kit aimed at restoring braking performance on the Kia Cadenza while addressing wear, noise, and corrosion concerns.
This part number 4514-03021 is a direct fit for Kia Cadenza brake service where a front and rear disc brake kit is required. It is also a practical choice for drivers searching for a 2014-2016 Kia Cadenza brake rotor and pad kit, or a coated rotor and ceramic pad set for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn friction material
- Rotor rust and surface corrosion on daily-driven vehicles
- Vibration or harshness during braking
Installation Notes
For best results, inspect calipers, slides, and hub surfaces before installation. The rotors are processed dry and ready to install, so no oil removal is required before service. Follow proper brake bedding procedures after installation to help the pads and rotors seat evenly. This kit is listed for 2014-2016 Kia Cadenza front and rear use, including electric parking brake compatible disc brake rotor applications noted by the manufacturer.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $337.83
-65%$337.83
$118.24Description
Brake Kit for Kia Cadenza
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2014-2016 Kia Cadenza front and rear brake service. Part number 4514-03021 combines coated rotors, ceramic pads, and brake hardware in one disc brake kit for a complete axle refresh.
- Compatible with 2014-2016 Kia Cadenza front and rear brake applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry, ready-to-install rotor coating reduces prep time during brake service
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Rotor machining includes a non-directional finish for smoother pad bed-in
Product Line Details
The DFC GEOSPEC rotor line is designed for OE-style durability and fit, using G3000/G11H18 cast iron and tight machining tolerances. The 5000 Advanced Brake Pads line focuses on consistent friction behavior, reduced break-in time, and quieter operation through post-curing, scorching, and shim construction. Together, these components create a service kit aimed at restoring braking performance on the Kia Cadenza while addressing wear, noise, and corrosion concerns.
This part number 4514-03021 is a direct fit for Kia Cadenza brake service where a front and rear disc brake kit is required. It is also a practical choice for drivers searching for a 2014-2016 Kia Cadenza brake rotor and pad kit, or a coated rotor and ceramic pad set for the same application.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Longer stopping distances from worn friction material
- Rotor rust and surface corrosion on daily-driven vehicles
- Vibration or harshness during braking
Installation Notes
For best results, inspect calipers, slides, and hub surfaces before installation. The rotors are processed dry and ready to install, so no oil removal is required before service. Follow proper brake bedding procedures after installation to help the pads and rotors seat evenly. This kit is listed for 2014-2016 Kia Cadenza front and rear use, including electric parking brake compatible disc brake rotor applications noted by the manufacturer.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
