Dynamite Friction 4512-99234 Disc Brake Kit - Rear
Rear Brake Kit for 2013-2014 Ford Mustang
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit for the 2013-2014 Ford Mustang. It combines coated rear rotors, ceramic brake pads, and brake hardware in one service package for a complete rear brake refresh.
Part number 4512-99234 is built for drivers looking for OE-style fitment, corrosion resistance, and consistent braking feel on the Ford Mustang rear axle.
Key Features
- Fits 2013-2014 Ford Mustang, rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor specification for OEM-style durability
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is designed as a complete brake service solution for rear brake work. The coated rotors resist rust better than conventional paint or zinc finishes, while the ceramic pads are formulated for stable friction and smooth operation. For the 2013-2014 Ford Mustang, rear brake service benefits from the matched rotor, pad, and hardware combination in part number 4512-99234.
Each rotor is machined to tight tolerances, inspected for balance on vented applications, and checked against critical OE specifications. The pad set is post cured and scorched to reduce the need for extended break-in. This makes 4512-99234 a practical choice for a rear brake job on the Ford Mustang when you want a direct service kit rather than piecing components together separately.
What This Kit Helps Address
- Rear brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak brake hardware
- Reduced braking consistency from worn rear rotors and pads
- Longer installation time from rotors that require extra prep
- Rust buildup on exposed rotor surfaces
Installation Notes
Confirm rear axle fitment before ordering. This kit is listed for 2013-2014 Ford Mustang rear applications only. The rotors are shipped dry and ready for installation, and the coated surface is removed naturally by the brake pads during normal use. Follow standard brake service procedures, inspect calipers and slides during replacement, and verify proper torque and bedding after installation.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications and undergo 100% inspection of critical dimensions and balance checks where applicable. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-99234 is part of DFC’s complete brake kit approach for consistent rear brake service on the Ford Mustang.
Rear Brake Kit for 2013-2014 Ford Mustang
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit for the 2013-2014 Ford Mustang. It combines coated rear rotors, ceramic brake pads, and brake hardware in one service package for a complete rear brake refresh.
Part number 4512-99234 is built for drivers looking for OE-style fitment, corrosion resistance, and consistent braking feel on the Ford Mustang rear axle.
Key Features
- Fits 2013-2014 Ford Mustang, rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor specification for OEM-style durability
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is designed as a complete brake service solution for rear brake work. The coated rotors resist rust better than conventional paint or zinc finishes, while the ceramic pads are formulated for stable friction and smooth operation. For the 2013-2014 Ford Mustang, rear brake service benefits from the matched rotor, pad, and hardware combination in part number 4512-99234.
Each rotor is machined to tight tolerances, inspected for balance on vented applications, and checked against critical OE specifications. The pad set is post cured and scorched to reduce the need for extended break-in. This makes 4512-99234 a practical choice for a rear brake job on the Ford Mustang when you want a direct service kit rather than piecing components together separately.
What This Kit Helps Address
- Rear brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak brake hardware
- Reduced braking consistency from worn rear rotors and pads
- Longer installation time from rotors that require extra prep
- Rust buildup on exposed rotor surfaces
Installation Notes
Confirm rear axle fitment before ordering. This kit is listed for 2013-2014 Ford Mustang rear applications only. The rotors are shipped dry and ready for installation, and the coated surface is removed naturally by the brake pads during normal use. Follow standard brake service procedures, inspect calipers and slides during replacement, and verify proper torque and bedding after installation.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications and undergo 100% inspection of critical dimensions and balance checks where applicable. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-99234 is part of DFC’s complete brake kit approach for consistent rear brake service on the Ford Mustang.
Original: $219.63
-65%$219.63
$76.87Description
Rear Brake Kit for 2013-2014 Ford Mustang
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit for the 2013-2014 Ford Mustang. It combines coated rear rotors, ceramic brake pads, and brake hardware in one service package for a complete rear brake refresh.
Part number 4512-99234 is built for drivers looking for OE-style fitment, corrosion resistance, and consistent braking feel on the Ford Mustang rear axle.
Key Features
- Fits 2013-2014 Ford Mustang, rear
- DFC GEOSPEC coated rotors with a silver-gray anti-rust finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor specification for OEM-style durability
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads reduce initial break-in time
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is designed as a complete brake service solution for rear brake work. The coated rotors resist rust better than conventional paint or zinc finishes, while the ceramic pads are formulated for stable friction and smooth operation. For the 2013-2014 Ford Mustang, rear brake service benefits from the matched rotor, pad, and hardware combination in part number 4512-99234.
Each rotor is machined to tight tolerances, inspected for balance on vented applications, and checked against critical OE specifications. The pad set is post cured and scorched to reduce the need for extended break-in. This makes 4512-99234 a practical choice for a rear brake job on the Ford Mustang when you want a direct service kit rather than piecing components together separately.
What This Kit Helps Address
- Rear brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak brake hardware
- Reduced braking consistency from worn rear rotors and pads
- Longer installation time from rotors that require extra prep
- Rust buildup on exposed rotor surfaces
Installation Notes
Confirm rear axle fitment before ordering. This kit is listed for 2013-2014 Ford Mustang rear applications only. The rotors are shipped dry and ready for installation, and the coated surface is removed naturally by the brake pads during normal use. Follow standard brake service procedures, inspect calipers and slides during replacement, and verify proper torque and bedding after installation.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications and undergo 100% inspection of critical dimensions and balance checks where applicable. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-99234 is part of DFC’s complete brake kit approach for consistent rear brake service on the Ford Mustang.
