Dynamite Friction 4512-99182 Disc Brake Kit - Front
DFC Brake Kit with Coated Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for drivers who want matched components in one package. Part number 4512-99182 combines coated rotors, ceramic brake pads, and brake hardware for a cleaner, more efficient brake service.
Compatible With select vehicle applications, this kit is built for front or rear brake service depending on the listed fitment. The DFC 4512-99182 kit is designed for everyday braking performance, reduced noise, and corrosion resistance on the rotor surface.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface for quicker initial bedding
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad seating
- Dry-processed, ready-to-install rotors with no oil coating to clean off
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC brake kits are assembled to simplify brake service by pairing the correct friction material with OE-style rotor construction and matching hardware. The coated rotors are made to OEM specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware is engineered to restore proper caliper movement and spring tension. Part number 4512-99182 is a practical choice for a complete brake refresh on vehicles that need dependable stopping performance and corrosion protection.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven pad wear caused by aged hardware
- Longer pedal response from worn friction components
- Vibration or harshness during braking
Installation Notes
Install on the axle position listed in the fitment data for your vehicle. Clean the hub surface before mounting the rotor, and follow proper torque procedures during reassembly. The rotor coating is designed to wear away in the pad sweep area during normal use. For best results, complete a proper brake bed-in procedure after installation. Part number 4512-99182 is intended for service technicians and experienced DIY brake work.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
DFC Brake Kit with Coated Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for drivers who want matched components in one package. Part number 4512-99182 combines coated rotors, ceramic brake pads, and brake hardware for a cleaner, more efficient brake service.
Compatible With select vehicle applications, this kit is built for front or rear brake service depending on the listed fitment. The DFC 4512-99182 kit is designed for everyday braking performance, reduced noise, and corrosion resistance on the rotor surface.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface for quicker initial bedding
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad seating
- Dry-processed, ready-to-install rotors with no oil coating to clean off
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC brake kits are assembled to simplify brake service by pairing the correct friction material with OE-style rotor construction and matching hardware. The coated rotors are made to OEM specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware is engineered to restore proper caliper movement and spring tension. Part number 4512-99182 is a practical choice for a complete brake refresh on vehicles that need dependable stopping performance and corrosion protection.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven pad wear caused by aged hardware
- Longer pedal response from worn friction components
- Vibration or harshness during braking
Installation Notes
Install on the axle position listed in the fitment data for your vehicle. Clean the hub surface before mounting the rotor, and follow proper torque procedures during reassembly. The rotor coating is designed to wear away in the pad sweep area during normal use. For best results, complete a proper brake bed-in procedure after installation. Part number 4512-99182 is intended for service technicians and experienced DIY brake work.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Original: $417.09
-65%$417.09
$145.98Description
DFC Brake Kit with Coated Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake service kit for drivers who want matched components in one package. Part number 4512-99182 combines coated rotors, ceramic brake pads, and brake hardware for a cleaner, more efficient brake service.
Compatible With select vehicle applications, this kit is built for front or rear brake service depending on the listed fitment. The DFC 4512-99182 kit is designed for everyday braking performance, reduced noise, and corrosion resistance on the rotor surface.
Key Features
- Complete disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface for quicker initial bedding
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad seating
- Dry-processed, ready-to-install rotors with no oil coating to clean off
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC brake kits are assembled to simplify brake service by pairing the correct friction material with OE-style rotor construction and matching hardware. The coated rotors are made to OEM specifications using G3000/G11H18 cast iron, then machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware is engineered to restore proper caliper movement and spring tension. Part number 4512-99182 is a practical choice for a complete brake refresh on vehicles that need dependable stopping performance and corrosion protection.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven pad wear caused by aged hardware
- Longer pedal response from worn friction components
- Vibration or harshness during braking
Installation Notes
Install on the axle position listed in the fitment data for your vehicle. Clean the hub surface before mounting the rotor, and follow proper torque procedures during reassembly. The rotor coating is designed to wear away in the pad sweep area during normal use. For best results, complete a proper brake bed-in procedure after installation. Part number 4512-99182 is intended for service technicians and experienced DIY brake work.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
