Dynamite Friction 4512-99068 Disc Brake Kit - Front
Front Brake Kit for Ford Escape and Transit Connect
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-99068, is a front disc brake kit built for OE-style service on select Ford and Lincoln applications. It combines coated rotors, ceramic brake pads, and matched hardware for a complete front brake refresh.
Compatible With 2013-2019 Ford Escape front, 2017-2019 Lincoln MKC front, 2018 Ford Transit Connect front with production date to 5/27/2018 and 12mm studs, 2014-2017 Ford Transit Connect front, 2014 Ford Focus front with production date to 3/31/2014 and 320mm front rotors, and 2013 Ford Focus front.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Dry-processed rotors that are ready to install
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and is machined to tight tolerances for durability and stable braking performance. Each rotor is finished with a non-directional surface to support even pad contact, while vented rotors are balance-checked and corrected when needed. The 5000 Advanced pads are formulated for consistent friction, and the hardware kit is designed to restore proper caliper movement and reduce noise from worn or corroded components. This part number 4512-99068 is a practical choice for a front brake service on Ford Escape, Ford Focus, Ford Transit Connect, and Lincoln MKC models listed above.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust buildup on exposed braking surfaces
- Reduced stopping consistency from aged friction material
- Vibration or harshness during braking
Installation Notes
Verify rotor size, stud configuration, production date, and front axle fitment before installation. Clean the hub surface thoroughly, inspect caliper slides and mounting points, and follow the vehicle manufacturer’s brake service procedure. The coated rotor surface is processed dry and installs without additional preparation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and OE specification compliance, and vented rotors are electronically mill-balanced when required. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-99068 is engineered for dependable front brake service on the listed Ford and Lincoln vehicles.
Front Brake Kit for Ford Escape and Transit Connect
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-99068, is a front disc brake kit built for OE-style service on select Ford and Lincoln applications. It combines coated rotors, ceramic brake pads, and matched hardware for a complete front brake refresh.
Compatible With 2013-2019 Ford Escape front, 2017-2019 Lincoln MKC front, 2018 Ford Transit Connect front with production date to 5/27/2018 and 12mm studs, 2014-2017 Ford Transit Connect front, 2014 Ford Focus front with production date to 3/31/2014 and 320mm front rotors, and 2013 Ford Focus front.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Dry-processed rotors that are ready to install
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and is machined to tight tolerances for durability and stable braking performance. Each rotor is finished with a non-directional surface to support even pad contact, while vented rotors are balance-checked and corrected when needed. The 5000 Advanced pads are formulated for consistent friction, and the hardware kit is designed to restore proper caliper movement and reduce noise from worn or corroded components. This part number 4512-99068 is a practical choice for a front brake service on Ford Escape, Ford Focus, Ford Transit Connect, and Lincoln MKC models listed above.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust buildup on exposed braking surfaces
- Reduced stopping consistency from aged friction material
- Vibration or harshness during braking
Installation Notes
Verify rotor size, stud configuration, production date, and front axle fitment before installation. Clean the hub surface thoroughly, inspect caliper slides and mounting points, and follow the vehicle manufacturer’s brake service procedure. The coated rotor surface is processed dry and installs without additional preparation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and OE specification compliance, and vented rotors are electronically mill-balanced when required. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-99068 is engineered for dependable front brake service on the listed Ford and Lincoln vehicles.
Description
Front Brake Kit for Ford Escape and Transit Connect
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-99068, is a front disc brake kit built for OE-style service on select Ford and Lincoln applications. It combines coated rotors, ceramic brake pads, and matched hardware for a complete front brake refresh.
Compatible With 2013-2019 Ford Escape front, 2017-2019 Lincoln MKC front, 2018 Ford Transit Connect front with production date to 5/27/2018 and 12mm studs, 2014-2017 Ford Transit Connect front, 2014 Ford Focus front with production date to 3/31/2014 and 320mm front rotors, and 2013 Ford Focus front.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Dry-processed rotors that are ready to install
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and is machined to tight tolerances for durability and stable braking performance. Each rotor is finished with a non-directional surface to support even pad contact, while vented rotors are balance-checked and corrected when needed. The 5000 Advanced pads are formulated for consistent friction, and the hardware kit is designed to restore proper caliper movement and reduce noise from worn or corroded components. This part number 4512-99068 is a practical choice for a front brake service on Ford Escape, Ford Focus, Ford Transit Connect, and Lincoln MKC models listed above.
Common Brake Issues This Kit Addresses
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Rotor rust buildup on exposed braking surfaces
- Reduced stopping consistency from aged friction material
- Vibration or harshness during braking
Installation Notes
Verify rotor size, stud configuration, production date, and front axle fitment before installation. Clean the hub surface thoroughly, inspect caliper slides and mounting points, and follow the vehicle manufacturer’s brake service procedure. The coated rotor surface is processed dry and installs without additional preparation.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and OE specification compliance, and vented rotors are electronically mill-balanced when required. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-99068 is engineered for dependable front brake service on the listed Ford and Lincoln vehicles.
