Dynamite Friction 4512-80112 Disc Brake Kit - Front
Brake Kit for Mazda 6 Front Service
Restore front braking performance on the 2016-2020 Mazda 6 with this DFC brake kit. Part number 4512-80112 combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a complete front brake service.
Compatible with front brake service on the Mazda 6, this kit is built for drivers who want OE-style fitment, corrosion protection, and consistent pedal response in one package. The DFC 4512-80112 kit is also a practical choice for a 2016-2020 Mazda 6 front brake job where rotor finish, pad stability, and hardware condition all matter.
Key Features
- Complete front disc brake kit for 2016-2020 Mazda 6
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed, ready-to-install rotors with non-directional finish
- Hardware kit included for the front brake service
Product Details
DFC GEOSPEC coated rotors are manufactured to G3000/G11H18 cast iron specifications and machined to tight tolerances for OE-style durability and stability. The coating is designed to resist rust better than conventional paint or zinc finishes, while the non-directional surface helps promote even pad bed-in and smoother stopping. The 5000 Advanced pads are post cured for stable friction performance and assembled with premium shims to help reduce brake noise and harshness. Part number 4512-80112 is a front brake service kit for Mazda 6 applications that need a coordinated rotor, pad, and hardware replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from worn friction material
- Uneven pad wear from stressed or corroded hardware
Installation Notes
Fits 2016-2020 Mazda 6, front. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly, torque all fasteners to factory specification, and follow a proper pad bed-in procedure after installation. The rotors are shipped dry and ready to install without additional preparation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-80112 is engineered to meet OE specifications for fit, durability, and braking stability.
Brake Kit for Mazda 6 Front Service
Restore front braking performance on the 2016-2020 Mazda 6 with this DFC brake kit. Part number 4512-80112 combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a complete front brake service.
Compatible with front brake service on the Mazda 6, this kit is built for drivers who want OE-style fitment, corrosion protection, and consistent pedal response in one package. The DFC 4512-80112 kit is also a practical choice for a 2016-2020 Mazda 6 front brake job where rotor finish, pad stability, and hardware condition all matter.
Key Features
- Complete front disc brake kit for 2016-2020 Mazda 6
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed, ready-to-install rotors with non-directional finish
- Hardware kit included for the front brake service
Product Details
DFC GEOSPEC coated rotors are manufactured to G3000/G11H18 cast iron specifications and machined to tight tolerances for OE-style durability and stability. The coating is designed to resist rust better than conventional paint or zinc finishes, while the non-directional surface helps promote even pad bed-in and smoother stopping. The 5000 Advanced pads are post cured for stable friction performance and assembled with premium shims to help reduce brake noise and harshness. Part number 4512-80112 is a front brake service kit for Mazda 6 applications that need a coordinated rotor, pad, and hardware replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from worn friction material
- Uneven pad wear from stressed or corroded hardware
Installation Notes
Fits 2016-2020 Mazda 6, front. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly, torque all fasteners to factory specification, and follow a proper pad bed-in procedure after installation. The rotors are shipped dry and ready to install without additional preparation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-80112 is engineered to meet OE specifications for fit, durability, and braking stability.
Original: $219.83
-65%$219.83
$76.94Description
Brake Kit for Mazda 6 Front Service
Restore front braking performance on the 2016-2020 Mazda 6 with this DFC brake kit. Part number 4512-80112 combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a complete front brake service.
Compatible with front brake service on the Mazda 6, this kit is built for drivers who want OE-style fitment, corrosion protection, and consistent pedal response in one package. The DFC 4512-80112 kit is also a practical choice for a 2016-2020 Mazda 6 front brake job where rotor finish, pad stability, and hardware condition all matter.
Key Features
- Complete front disc brake kit for 2016-2020 Mazda 6
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed, ready-to-install rotors with non-directional finish
- Hardware kit included for the front brake service
Product Details
DFC GEOSPEC coated rotors are manufactured to G3000/G11H18 cast iron specifications and machined to tight tolerances for OE-style durability and stability. The coating is designed to resist rust better than conventional paint or zinc finishes, while the non-directional surface helps promote even pad bed-in and smoother stopping. The 5000 Advanced pads are post cured for stable friction performance and assembled with premium shims to help reduce brake noise and harshness. Part number 4512-80112 is a front brake service kit for Mazda 6 applications that need a coordinated rotor, pad, and hardware replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Reduced stopping consistency from worn friction material
- Uneven pad wear from stressed or corroded hardware
Installation Notes
Fits 2016-2020 Mazda 6, front. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly, torque all fasteners to factory specification, and follow a proper pad bed-in procedure after installation. The rotors are shipped dry and ready to install without additional preparation.
Quality Assurance
Each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-80112 is engineered to meet OE specifications for fit, durability, and braking stability.
