Dynamite Friction 4512-80110 Disc Brake Kit - Rear
Rear Brake Kit for Mazda 3 and Mazda 3 Sport
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select 2017-2018 Mazda 3 and Mazda 3 Sport models. Part number 4512-80110 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, OE-style brake repair.
Key Features
- Rear disc brake kit for select 2017-2018 Mazda 3 and Mazda 3 Sport applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bedding
- 100% inspected rotors and balance-corrected vented castings where required
- Part number 4512-80110 for rear brake service on Mazda 3 and Mazda 3 Sport
Product Details
DFC’s GEOSPEC rotor line is designed around dry, ready-to-install coated rotors that resist rust better than conventional painted or zinc-coated finishes. The rotor casting uses G3000/G11H18 cast iron specifications and is finished to OE-style dimensions for durability, stability, and consistent braking performance. The 5000 Advanced pad formulation is developed for modern vehicle braking demands, with post-curing and scorching steps that help deliver stable friction characteristics and a more consistent first stop. For Mazda 3 and Mazda 3 Sport rear brake service, part number 4512-80110 provides a matched rotor-and-pad package for 2017-2018 Mexico-built vehicles excluding Electric Parking Brake models.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Brake pulsation caused by rotor wear or uneven rotor surfaces
- Rust buildup on exposed rotor hats and vanes
- Uneven pad wear from aged or corroded hardware components
- Longer stopping distances from worn friction material
Installation Notes and Fitment
Compatible With 2017-2018 Mazda 3, rear, Mexico Built excluding Electric Parking Brake. Compatible With 2017-2018 Mazda 3 Sport, rear, Mexico Built excluding Electric Parking Brake. Verify rear axle configuration and parking brake type before installation. Clean rotor surfaces before assembly only as needed for handling residue, and follow proper pad bedding procedures after service. Part number 4512-80110 is intended for rear brake replacement on the listed Mazda applications.
Quality Assurance
Each DFC GEOSPEC rotor passes 100% inspection for critical dimensions and is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
Rear Brake Kit for Mazda 3 and Mazda 3 Sport
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select 2017-2018 Mazda 3 and Mazda 3 Sport models. Part number 4512-80110 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, OE-style brake repair.
Key Features
- Rear disc brake kit for select 2017-2018 Mazda 3 and Mazda 3 Sport applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bedding
- 100% inspected rotors and balance-corrected vented castings where required
- Part number 4512-80110 for rear brake service on Mazda 3 and Mazda 3 Sport
Product Details
DFC’s GEOSPEC rotor line is designed around dry, ready-to-install coated rotors that resist rust better than conventional painted or zinc-coated finishes. The rotor casting uses G3000/G11H18 cast iron specifications and is finished to OE-style dimensions for durability, stability, and consistent braking performance. The 5000 Advanced pad formulation is developed for modern vehicle braking demands, with post-curing and scorching steps that help deliver stable friction characteristics and a more consistent first stop. For Mazda 3 and Mazda 3 Sport rear brake service, part number 4512-80110 provides a matched rotor-and-pad package for 2017-2018 Mexico-built vehicles excluding Electric Parking Brake models.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Brake pulsation caused by rotor wear or uneven rotor surfaces
- Rust buildup on exposed rotor hats and vanes
- Uneven pad wear from aged or corroded hardware components
- Longer stopping distances from worn friction material
Installation Notes and Fitment
Compatible With 2017-2018 Mazda 3, rear, Mexico Built excluding Electric Parking Brake. Compatible With 2017-2018 Mazda 3 Sport, rear, Mexico Built excluding Electric Parking Brake. Verify rear axle configuration and parking brake type before installation. Clean rotor surfaces before assembly only as needed for handling residue, and follow proper pad bedding procedures after service. Part number 4512-80110 is intended for rear brake replacement on the listed Mazda applications.
Quality Assurance
Each DFC GEOSPEC rotor passes 100% inspection for critical dimensions and is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
Original: $123.25
-65%$123.25
$43.14Description
Rear Brake Kit for Mazda 3 and Mazda 3 Sport
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select 2017-2018 Mazda 3 and Mazda 3 Sport models. Part number 4512-80110 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, OE-style brake repair.
Key Features
- Rear disc brake kit for select 2017-2018 Mazda 3 and Mazda 3 Sport applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bedding
- 100% inspected rotors and balance-corrected vented castings where required
- Part number 4512-80110 for rear brake service on Mazda 3 and Mazda 3 Sport
Product Details
DFC’s GEOSPEC rotor line is designed around dry, ready-to-install coated rotors that resist rust better than conventional painted or zinc-coated finishes. The rotor casting uses G3000/G11H18 cast iron specifications and is finished to OE-style dimensions for durability, stability, and consistent braking performance. The 5000 Advanced pad formulation is developed for modern vehicle braking demands, with post-curing and scorching steps that help deliver stable friction characteristics and a more consistent first stop. For Mazda 3 and Mazda 3 Sport rear brake service, part number 4512-80110 provides a matched rotor-and-pad package for 2017-2018 Mexico-built vehicles excluding Electric Parking Brake models.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Brake pulsation caused by rotor wear or uneven rotor surfaces
- Rust buildup on exposed rotor hats and vanes
- Uneven pad wear from aged or corroded hardware components
- Longer stopping distances from worn friction material
Installation Notes and Fitment
Compatible With 2017-2018 Mazda 3, rear, Mexico Built excluding Electric Parking Brake. Compatible With 2017-2018 Mazda 3 Sport, rear, Mexico Built excluding Electric Parking Brake. Verify rear axle configuration and parking brake type before installation. Clean rotor surfaces before assembly only as needed for handling residue, and follow proper pad bedding procedures after service. Part number 4512-80110 is intended for rear brake replacement on the listed Mazda applications.
Quality Assurance
Each DFC GEOSPEC rotor passes 100% inspection for critical dimensions and is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
