Dynamite Friction 4512-80081 Disc Brake Kit - Front
Front Brake Kit for Mazda 3 and Mazda 3 Sport
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select 2017-2018 Mazda 3 and Mazda 3 Sport models built in Mexico with an electric parking brake. Part number 4512-80081 combines coated rotors, ceramic pads, and matching hardware components in one brake service package.
Key Features
- Front disc brake kit for select Mazda 3 and Mazda 3 Sport applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s GEOSPEC rotor line is built for drivers who want OE-style fit and dependable braking performance with added corrosion protection. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean off oil before installation. The rotors are machined to tight tolerances, balanced where required, and inspected to confirm critical dimensions meet OE specifications. The 5000 Advanced ceramic pads are formulated for stable friction performance and reduced break-in time, making this kit a practical choice for a front brake service on a Mazda 3 or Mazda 3 Sport.
This part number, 4512-80081, is a direct-fit front brake kit for 2017-2018 Mazda 3 and 2017-2018 Mazda 3 Sport models with Mexico-built configuration and electric parking brake equipment. It is a focused solution for drivers searching for a front brake kit for 2017 Mazda 3 Mexico built with electric parking brake or a front brake kit for 2018 Mazda 3 Sport Mexico built with electric parking brake.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from worn front rotors
- Rust buildup on exposed rotor surfaces
- Longer service time caused by rotors that require extra prep before installation
Installation Notes
Verify vehicle configuration before ordering: this kit fits front applications only and is listed for Mexico-built 2017-2018 Mazda 3 and Mazda 3 Sport models with electric parking brake. Clean mating surfaces, inspect caliper condition, and follow the manufacturer’s bed-in procedure for the pads and rotors. The dry rotor coating is removed naturally by the brake pads during normal use.
Quality Assurance
DFC rotors in this kit are inspected for balance and critical dimensions, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit is engineered to OE-style form, fit, and function. Part number 4512-80081 is built to support a consistent front brake service on the Mazda 3 platform.
Front Brake Kit for Mazda 3 and Mazda 3 Sport
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select 2017-2018 Mazda 3 and Mazda 3 Sport models built in Mexico with an electric parking brake. Part number 4512-80081 combines coated rotors, ceramic pads, and matching hardware components in one brake service package.
Key Features
- Front disc brake kit for select Mazda 3 and Mazda 3 Sport applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s GEOSPEC rotor line is built for drivers who want OE-style fit and dependable braking performance with added corrosion protection. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean off oil before installation. The rotors are machined to tight tolerances, balanced where required, and inspected to confirm critical dimensions meet OE specifications. The 5000 Advanced ceramic pads are formulated for stable friction performance and reduced break-in time, making this kit a practical choice for a front brake service on a Mazda 3 or Mazda 3 Sport.
This part number, 4512-80081, is a direct-fit front brake kit for 2017-2018 Mazda 3 and 2017-2018 Mazda 3 Sport models with Mexico-built configuration and electric parking brake equipment. It is a focused solution for drivers searching for a front brake kit for 2017 Mazda 3 Mexico built with electric parking brake or a front brake kit for 2018 Mazda 3 Sport Mexico built with electric parking brake.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from worn front rotors
- Rust buildup on exposed rotor surfaces
- Longer service time caused by rotors that require extra prep before installation
Installation Notes
Verify vehicle configuration before ordering: this kit fits front applications only and is listed for Mexico-built 2017-2018 Mazda 3 and Mazda 3 Sport models with electric parking brake. Clean mating surfaces, inspect caliper condition, and follow the manufacturer’s bed-in procedure for the pads and rotors. The dry rotor coating is removed naturally by the brake pads during normal use.
Quality Assurance
DFC rotors in this kit are inspected for balance and critical dimensions, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit is engineered to OE-style form, fit, and function. Part number 4512-80081 is built to support a consistent front brake service on the Mazda 3 platform.
Original: $192.65
-65%$192.65
$67.43Description
Front Brake Kit for Mazda 3 and Mazda 3 Sport
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select 2017-2018 Mazda 3 and Mazda 3 Sport models built in Mexico with an electric parking brake. Part number 4512-80081 combines coated rotors, ceramic pads, and matching hardware components in one brake service package.
Key Features
- Front disc brake kit for select Mazda 3 and Mazda 3 Sport applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic brake pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s GEOSPEC rotor line is built for drivers who want OE-style fit and dependable braking performance with added corrosion protection. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry-ready design eliminates the need to clean off oil before installation. The rotors are machined to tight tolerances, balanced where required, and inspected to confirm critical dimensions meet OE specifications. The 5000 Advanced ceramic pads are formulated for stable friction performance and reduced break-in time, making this kit a practical choice for a front brake service on a Mazda 3 or Mazda 3 Sport.
This part number, 4512-80081, is a direct-fit front brake kit for 2017-2018 Mazda 3 and 2017-2018 Mazda 3 Sport models with Mexico-built configuration and electric parking brake equipment. It is a focused solution for drivers searching for a front brake kit for 2017 Mazda 3 Mexico built with electric parking brake or a front brake kit for 2018 Mazda 3 Sport Mexico built with electric parking brake.
What It Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from worn front rotors
- Rust buildup on exposed rotor surfaces
- Longer service time caused by rotors that require extra prep before installation
Installation Notes
Verify vehicle configuration before ordering: this kit fits front applications only and is listed for Mexico-built 2017-2018 Mazda 3 and Mazda 3 Sport models with electric parking brake. Clean mating surfaces, inspect caliper condition, and follow the manufacturer’s bed-in procedure for the pads and rotors. The dry rotor coating is removed naturally by the brake pads during normal use.
Quality Assurance
DFC rotors in this kit are inspected for balance and critical dimensions, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit is engineered to OE-style form, fit, and function. Part number 4512-80081 is built to support a consistent front brake service on the Mazda 3 platform.
