Dynamite Friction 4512-80078 Disc Brake Kit - Front
Brake Kit for Mazda 2 Front Service
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-80078, is a front disc brake kit for select Mazda 2 models. It combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake service on 2011-2015 Mazda 2 and 2012-2015 Mazda 2 Mexico applications.
Key Features
- Front disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- Compatible with 2011-2015 Mazda 2 front brake service
- Also fits 2012-2015 Mazda 2 Mexico front applications
- GeoSpec coated rotors resist rust and arrive dry, ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 100% post-cured pads with scorched surfaces for stable friction from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-80078 for fitment-based search and ordering
Product Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is built for drivers replacing worn front brakes on the Mazda 2. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated finish helps protect against corrosion while avoiding the extra prep time associated with oil-coated rotors. The ceramic pad formulation is designed for consistent friction performance and smoother operation, while the included hardware kit addresses common wear points that can contribute to caliper movement and brake noise. If you are searching for a Mazda 2 front brake kit, DFC 4512-80078 is a direct service solution for these listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Front brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or reduced braking smoothness
- Vibration or harshness from worn brake hardware
- Extended stopping distance caused by worn pads and rotors
Installation Notes
Compatible With front axle service only. The rotors are shipped dry and ready for installation, which reduces prep time during a brake job. For best results, clean the hub mounting surface, inspect calipers and slides, and follow proper pad bed-in procedures after installation. Verify vehicle application by year, model, and market before ordering, especially for Mazda 2 Mexico fitments.
Quality Assurance
DFC states that each rotor is 100% inspected after machining to confirm critical dimensions and OE-level specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Mazda 2 Front Service
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-80078, is a front disc brake kit for select Mazda 2 models. It combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake service on 2011-2015 Mazda 2 and 2012-2015 Mazda 2 Mexico applications.
Key Features
- Front disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- Compatible with 2011-2015 Mazda 2 front brake service
- Also fits 2012-2015 Mazda 2 Mexico front applications
- GeoSpec coated rotors resist rust and arrive dry, ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 100% post-cured pads with scorched surfaces for stable friction from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-80078 for fitment-based search and ordering
Product Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is built for drivers replacing worn front brakes on the Mazda 2. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated finish helps protect against corrosion while avoiding the extra prep time associated with oil-coated rotors. The ceramic pad formulation is designed for consistent friction performance and smoother operation, while the included hardware kit addresses common wear points that can contribute to caliper movement and brake noise. If you are searching for a Mazda 2 front brake kit, DFC 4512-80078 is a direct service solution for these listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Front brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or reduced braking smoothness
- Vibration or harshness from worn brake hardware
- Extended stopping distance caused by worn pads and rotors
Installation Notes
Compatible With front axle service only. The rotors are shipped dry and ready for installation, which reduces prep time during a brake job. For best results, clean the hub mounting surface, inspect calipers and slides, and follow proper pad bed-in procedures after installation. Verify vehicle application by year, model, and market before ordering, especially for Mazda 2 Mexico fitments.
Quality Assurance
DFC states that each rotor is 100% inspected after machining to confirm critical dimensions and OE-level specifications. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $157.72
-65%$157.72
$55.20Description
Brake Kit for Mazda 2 Front Service
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-80078, is a front disc brake kit for select Mazda 2 models. It combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake service on 2011-2015 Mazda 2 and 2012-2015 Mazda 2 Mexico applications.
Key Features
- Front disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- Compatible with 2011-2015 Mazda 2 front brake service
- Also fits 2012-2015 Mazda 2 Mexico front applications
- GeoSpec coated rotors resist rust and arrive dry, ready to install
- Non-directional rotor finish supports even pad bed-in and quieter stops
- 100% post-cured pads with scorched surfaces for stable friction from the first stop
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-80078 for fitment-based search and ordering
Product Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is built for drivers replacing worn front brakes on the Mazda 2. The rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated finish helps protect against corrosion while avoiding the extra prep time associated with oil-coated rotors. The ceramic pad formulation is designed for consistent friction performance and smoother operation, while the included hardware kit addresses common wear points that can contribute to caliper movement and brake noise. If you are searching for a Mazda 2 front brake kit, DFC 4512-80078 is a direct service solution for these listed applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Front brake noise during stops
- Rust buildup on exposed rotor surfaces
- Uneven pad wear or reduced braking smoothness
- Vibration or harshness from worn brake hardware
- Extended stopping distance caused by worn pads and rotors
Installation Notes
Compatible With front axle service only. The rotors are shipped dry and ready for installation, which reduces prep time during a brake job. For best results, clean the hub mounting surface, inspect calipers and slides, and follow proper pad bed-in procedures after installation. Verify vehicle application by year, model, and market before ordering, especially for Mazda 2 Mexico fitments.
Quality Assurance
DFC states that each rotor is 100% inspected after machining to confirm critical dimensions and OE-level specifications. The rotors include a 12-month warranty against defects in material and workmanship.
