Dynamite Friction 4512-80060 Disc Brake Kit - Rear
Rear Brake Kit for Mazda Miata
Upgrade the rear brakes on your Mazda Miata with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-80060. This rear disc brake kit is built for 2001-2005 Mazda Miata applications and combines coated rotors, ceramic pads, and brake hardware in one service package.
- Fits 2003-2005 Mazda Miata, rear
- Fits 2001-2002 Mazda Miata, rear; Sport & Hard Suspensions
- DFC GEOSPEC coated rotors with dry, ready-to-install finish
- G3000/G11H18 cast iron rotor construction for OE-style durability
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware with PTFE coating, vulcanized rubber, and stainless steel
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line is designed with a silver-gray corrosion-resistant coating that helps protect the rotor surface before and after installation. Each rotor is machined to tight tolerances, finished with a non-directional surface for even pad bed-in, and inspected for balance and critical dimensions. The 5000 Advanced pad line uses post-cured friction material and scorched surfaces to reduce initial break-in time while delivering consistent stopping performance. For Mazda Miata rear brake service, part number 4512-80060 brings the rotor, pad, and hardware components together for a complete rear axle refresh.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Squealing or vibration caused by aged pads and hardware
- Corrosion on exposed rotor surfaces
- Uneven pad wear from fatigued brake hardware
- Reduced braking consistency during routine brake service
Installation Notes
Rear brake service on the Mazda Miata should follow standard brake-cleaning and bedding procedures after installation. The coated rotors are shipped dry and ready to install, which helps reduce prep time during service. Verify rear fitment by model year and suspension notes before ordering, especially for 2001-2002 Mazda Miata Sport & Hard Suspensions applications.
Quality Assurance
DFC states that each rotor is inspected after machining to confirm critical dimensions and OE-spec targets, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-80060 is engineered for Mazda Miata rear brake maintenance with OE-style fit, finish, and function.
Rear Brake Kit for Mazda Miata
Upgrade the rear brakes on your Mazda Miata with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-80060. This rear disc brake kit is built for 2001-2005 Mazda Miata applications and combines coated rotors, ceramic pads, and brake hardware in one service package.
- Fits 2003-2005 Mazda Miata, rear
- Fits 2001-2002 Mazda Miata, rear; Sport & Hard Suspensions
- DFC GEOSPEC coated rotors with dry, ready-to-install finish
- G3000/G11H18 cast iron rotor construction for OE-style durability
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware with PTFE coating, vulcanized rubber, and stainless steel
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line is designed with a silver-gray corrosion-resistant coating that helps protect the rotor surface before and after installation. Each rotor is machined to tight tolerances, finished with a non-directional surface for even pad bed-in, and inspected for balance and critical dimensions. The 5000 Advanced pad line uses post-cured friction material and scorched surfaces to reduce initial break-in time while delivering consistent stopping performance. For Mazda Miata rear brake service, part number 4512-80060 brings the rotor, pad, and hardware components together for a complete rear axle refresh.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Squealing or vibration caused by aged pads and hardware
- Corrosion on exposed rotor surfaces
- Uneven pad wear from fatigued brake hardware
- Reduced braking consistency during routine brake service
Installation Notes
Rear brake service on the Mazda Miata should follow standard brake-cleaning and bedding procedures after installation. The coated rotors are shipped dry and ready to install, which helps reduce prep time during service. Verify rear fitment by model year and suspension notes before ordering, especially for 2001-2002 Mazda Miata Sport & Hard Suspensions applications.
Quality Assurance
DFC states that each rotor is inspected after machining to confirm critical dimensions and OE-spec targets, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-80060 is engineered for Mazda Miata rear brake maintenance with OE-style fit, finish, and function.
Description
Rear Brake Kit for Mazda Miata
Upgrade the rear brakes on your Mazda Miata with the DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-80060. This rear disc brake kit is built for 2001-2005 Mazda Miata applications and combines coated rotors, ceramic pads, and brake hardware in one service package.
- Fits 2003-2005 Mazda Miata, rear
- Fits 2001-2002 Mazda Miata, rear; Sport & Hard Suspensions
- DFC GEOSPEC coated rotors with dry, ready-to-install finish
- G3000/G11H18 cast iron rotor construction for OE-style durability
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware with PTFE coating, vulcanized rubber, and stainless steel
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line is designed with a silver-gray corrosion-resistant coating that helps protect the rotor surface before and after installation. Each rotor is machined to tight tolerances, finished with a non-directional surface for even pad bed-in, and inspected for balance and critical dimensions. The 5000 Advanced pad line uses post-cured friction material and scorched surfaces to reduce initial break-in time while delivering consistent stopping performance. For Mazda Miata rear brake service, part number 4512-80060 brings the rotor, pad, and hardware components together for a complete rear axle refresh.
What This Kit Helps Address
- Rear brake pulsation from worn or uneven rotors
- Squealing or vibration caused by aged pads and hardware
- Corrosion on exposed rotor surfaces
- Uneven pad wear from fatigued brake hardware
- Reduced braking consistency during routine brake service
Installation Notes
Rear brake service on the Mazda Miata should follow standard brake-cleaning and bedding procedures after installation. The coated rotors are shipped dry and ready to install, which helps reduce prep time during service. Verify rear fitment by model year and suspension notes before ordering, especially for 2001-2002 Mazda Miata Sport & Hard Suspensions applications.
Quality Assurance
DFC states that each rotor is inspected after machining to confirm critical dimensions and OE-spec targets, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-80060 is engineered for Mazda Miata rear brake maintenance with OE-style fit, finish, and function.
