Dynamite Friction 4512-76182 Disc Brake Kit - Rear
Rear Brake Kit for Toyota and Lexus
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Toyota and Lexus applications. Part number 4512-76182 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh on vehicles such as the Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570.
Designed for OE-style fitment and consistent braking performance, this kit focuses on corrosion resistance, quieter operation, and stable pedal feel. The DFC 4512-76182 package is a practical choice for drivers servicing rear brakes on full-size SUVs and trucks.
Key Features
- Rear disc brake kit with rotors, ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style hardware uses PTFE coating, vulcanized rubber, and stainless steel
- Part number: 4512-76182
Product Details
DFC built this brake kit around the demands of modern vehicles that rely on precise friction characteristics and consistent component interaction. The coated rotors are machined to tight tolerances, finished for smoother pad contact, and inspected for critical dimensions and balance. The brake pads are formulated for stable performance and reduced break-in effort, while the hardware is engineered to restore proper caliper movement and spring tension where worn or corroded parts can affect braking quality. Part number 4512-76182 is a direct-fit rear brake service solution for drivers looking to restore braking performance on Toyota and Lexus platforms.
Compatible With: Fits 2007-2021 Toyota Tundra, rear; Fits 2008-2021 Toyota Sequoia, rear; Fits 2013-2015 Toyota Land Cruiser, rear; Fits 2016-2021 Toyota Land Cruiser, rear; Fits 2008-2011 Toyota Land Cruiser, rear; Fits 2013-2021 Lexus LX570, rear; Fits 2008-2011 Lexus LX570, rear; Fits 2022 Toyota Sequoia, rear.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by corroded or stressed hardware
- Rotor rust and surface corrosion on exposed brake components
- Longer stopping distances from worn rear brake parts
- Vibration or harshness during light and moderate braking
Installation Notes
Inspect calipers, slides, and mounting points before installation, and replace any damaged components as needed. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper torque procedures during assembly. The rotor coating is designed to be removed by the pad contact area during normal braking, so no extra preparation is required before installation. Verify rear fitment by year, make, model, and brake configuration before ordering.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions. Each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent friction and quieter operation.
Rear Brake Kit for Toyota and Lexus
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Toyota and Lexus applications. Part number 4512-76182 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh on vehicles such as the Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570.
Designed for OE-style fitment and consistent braking performance, this kit focuses on corrosion resistance, quieter operation, and stable pedal feel. The DFC 4512-76182 package is a practical choice for drivers servicing rear brakes on full-size SUVs and trucks.
Key Features
- Rear disc brake kit with rotors, ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style hardware uses PTFE coating, vulcanized rubber, and stainless steel
- Part number: 4512-76182
Product Details
DFC built this brake kit around the demands of modern vehicles that rely on precise friction characteristics and consistent component interaction. The coated rotors are machined to tight tolerances, finished for smoother pad contact, and inspected for critical dimensions and balance. The brake pads are formulated for stable performance and reduced break-in effort, while the hardware is engineered to restore proper caliper movement and spring tension where worn or corroded parts can affect braking quality. Part number 4512-76182 is a direct-fit rear brake service solution for drivers looking to restore braking performance on Toyota and Lexus platforms.
Compatible With: Fits 2007-2021 Toyota Tundra, rear; Fits 2008-2021 Toyota Sequoia, rear; Fits 2013-2015 Toyota Land Cruiser, rear; Fits 2016-2021 Toyota Land Cruiser, rear; Fits 2008-2011 Toyota Land Cruiser, rear; Fits 2013-2021 Lexus LX570, rear; Fits 2008-2011 Lexus LX570, rear; Fits 2022 Toyota Sequoia, rear.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by corroded or stressed hardware
- Rotor rust and surface corrosion on exposed brake components
- Longer stopping distances from worn rear brake parts
- Vibration or harshness during light and moderate braking
Installation Notes
Inspect calipers, slides, and mounting points before installation, and replace any damaged components as needed. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper torque procedures during assembly. The rotor coating is designed to be removed by the pad contact area during normal braking, so no extra preparation is required before installation. Verify rear fitment by year, make, model, and brake configuration before ordering.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions. Each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent friction and quieter operation.
Original: $193.24
-65%$193.24
$67.63Description
Rear Brake Kit for Toyota and Lexus
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Toyota and Lexus applications. Part number 4512-76182 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh on vehicles such as the Toyota Tundra, Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570.
Designed for OE-style fitment and consistent braking performance, this kit focuses on corrosion resistance, quieter operation, and stable pedal feel. The DFC 4512-76182 package is a practical choice for drivers servicing rear brakes on full-size SUVs and trucks.
Key Features
- Rear disc brake kit with rotors, ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor coating reduces prep time during brake service
- Non-directional rotor finish supports even pad bed-in and smoother stops
- 5000 Advanced Brake Pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- OE-style hardware uses PTFE coating, vulcanized rubber, and stainless steel
- Part number: 4512-76182
Product Details
DFC built this brake kit around the demands of modern vehicles that rely on precise friction characteristics and consistent component interaction. The coated rotors are machined to tight tolerances, finished for smoother pad contact, and inspected for critical dimensions and balance. The brake pads are formulated for stable performance and reduced break-in effort, while the hardware is engineered to restore proper caliper movement and spring tension where worn or corroded parts can affect braking quality. Part number 4512-76182 is a direct-fit rear brake service solution for drivers looking to restore braking performance on Toyota and Lexus platforms.
Compatible With: Fits 2007-2021 Toyota Tundra, rear; Fits 2008-2021 Toyota Sequoia, rear; Fits 2013-2015 Toyota Land Cruiser, rear; Fits 2016-2021 Toyota Land Cruiser, rear; Fits 2008-2011 Toyota Land Cruiser, rear; Fits 2013-2021 Lexus LX570, rear; Fits 2008-2011 Lexus LX570, rear; Fits 2022 Toyota Sequoia, rear.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven braking feel caused by corroded or stressed hardware
- Rotor rust and surface corrosion on exposed brake components
- Longer stopping distances from worn rear brake parts
- Vibration or harshness during light and moderate braking
Installation Notes
Inspect calipers, slides, and mounting points before installation, and replace any damaged components as needed. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper torque procedures during assembly. The rotor coating is designed to be removed by the pad contact area during normal braking, so no extra preparation is required before installation. Verify rear fitment by year, make, model, and brake configuration before ordering.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE-style specifications using G3000/G11H18 cast iron, then inspected for balance and critical dimensions. Each rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured, scorched, and assembled with premium shims to support consistent friction and quieter operation.
