Dynamite Friction 4512-74128 Disc Brake Kit - Rear
Rear Brake Kit for Volkswagen and Audi
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74128, is a rear disc brake kit built for select Volkswagen and Audi applications. It combines coated rear rotors, ceramic brake pads, and matching brake hardware for a complete service solution.
Compatible With rear brake service on 2005-2016 Volkswagen and Audi models listed below, including Volkswagen Jetta, Golf, GTI, Passat, Eos, Beetle, Bora, and Audi A3 / A3 Quattro applications. Part number 4512-74128 is a direct reference for shoppers searching rear brake kit replacement by vehicle fitment.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- OE-style G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
This DFC brake service kit is engineered for rear axle replacement on Volkswagen and Audi vehicles that use the listed rotor sizes and caliper configurations. The coated rotors resist rust better than conventional painted or zinc-coated rotors, while the machined finish supports consistent contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance, and the included hardware addresses worn or corroded retaining components that can contribute to noise, uneven wear, and caliper movement. Search terms such as rear brake kit for 2011-2014 Volkswagen Jetta, rear brake kit for 2011-2014 Volkswagen GTI, and rear brake kit for 2011-2013 Audi A3 Quattro match this application family. Part number 4512-74128 is also used by shoppers comparing rear brake service kits for Volkswagen Golf and Passat models.
What It Helps Fix
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from aged rear brake components
Installation Notes
Rear brake service should be performed with the correct rotor diameter and rear caliper configuration for the vehicle. Confirm whether the application uses Bosch rear calipers, 272mm rear rotors, or production-date-specific fitment before ordering. Clean mating surfaces, inspect caliper slides, and follow the vehicle manufacturer’s torque specifications during installation. This kit is listed for rear position only.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for balance on vented designs, and checked against OE specifications before release. The rotors include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Volkswagen and Audi
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74128, is a rear disc brake kit built for select Volkswagen and Audi applications. It combines coated rear rotors, ceramic brake pads, and matching brake hardware for a complete service solution.
Compatible With rear brake service on 2005-2016 Volkswagen and Audi models listed below, including Volkswagen Jetta, Golf, GTI, Passat, Eos, Beetle, Bora, and Audi A3 / A3 Quattro applications. Part number 4512-74128 is a direct reference for shoppers searching rear brake kit replacement by vehicle fitment.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- OE-style G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
This DFC brake service kit is engineered for rear axle replacement on Volkswagen and Audi vehicles that use the listed rotor sizes and caliper configurations. The coated rotors resist rust better than conventional painted or zinc-coated rotors, while the machined finish supports consistent contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance, and the included hardware addresses worn or corroded retaining components that can contribute to noise, uneven wear, and caliper movement. Search terms such as rear brake kit for 2011-2014 Volkswagen Jetta, rear brake kit for 2011-2014 Volkswagen GTI, and rear brake kit for 2011-2013 Audi A3 Quattro match this application family. Part number 4512-74128 is also used by shoppers comparing rear brake service kits for Volkswagen Golf and Passat models.
What It Helps Fix
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from aged rear brake components
Installation Notes
Rear brake service should be performed with the correct rotor diameter and rear caliper configuration for the vehicle. Confirm whether the application uses Bosch rear calipers, 272mm rear rotors, or production-date-specific fitment before ordering. Clean mating surfaces, inspect caliper slides, and follow the vehicle manufacturer’s torque specifications during installation. This kit is listed for rear position only.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for balance on vented designs, and checked against OE specifications before release. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $125.22
-65%$125.22
$43.83Description
Rear Brake Kit for Volkswagen and Audi
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74128, is a rear disc brake kit built for select Volkswagen and Audi applications. It combines coated rear rotors, ceramic brake pads, and matching brake hardware for a complete service solution.
Compatible With rear brake service on 2005-2016 Volkswagen and Audi models listed below, including Volkswagen Jetta, Golf, GTI, Passat, Eos, Beetle, Bora, and Audi A3 / A3 Quattro applications. Part number 4512-74128 is a direct reference for shoppers searching rear brake kit replacement by vehicle fitment.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- OE-style G3000/G11H18 cast iron rotor construction
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
This DFC brake service kit is engineered for rear axle replacement on Volkswagen and Audi vehicles that use the listed rotor sizes and caliper configurations. The coated rotors resist rust better than conventional painted or zinc-coated rotors, while the machined finish supports consistent contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance, and the included hardware addresses worn or corroded retaining components that can contribute to noise, uneven wear, and caliper movement. Search terms such as rear brake kit for 2011-2014 Volkswagen Jetta, rear brake kit for 2011-2014 Volkswagen GTI, and rear brake kit for 2011-2013 Audi A3 Quattro match this application family. Part number 4512-74128 is also used by shoppers comparing rear brake service kits for Volkswagen Golf and Passat models.
What It Helps Fix
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from aged rear brake components
Installation Notes
Rear brake service should be performed with the correct rotor diameter and rear caliper configuration for the vehicle. Confirm whether the application uses Bosch rear calipers, 272mm rear rotors, or production-date-specific fitment before ordering. Clean mating surfaces, inspect caliper slides, and follow the vehicle manufacturer’s torque specifications during installation. This kit is listed for rear position only.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for balance on vented designs, and checked against OE specifications before release. The rotors include a 12-month warranty against defects in material and workmanship.
