Dynamite Friction 4512-74110 Disc Brake Kit - Rear
Rear Brake Kit for Volkswagen Jetta
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Volkswagen Jetta applications. Part number 4512-74110 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Compatible with 2004 Volkswagen Jetta rear and 2005 Volkswagen Jetta rear with production date from 1/05 to 11/05, this kit is aimed at drivers looking for OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Rear disc brake kit for select Volkswagen Jetta models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-74110
Product Details
DFC Complete Brake Kits are packaged to simplify rear brake service by combining the rotor, pad, and hardware components needed for the job. The GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. They are built to OEM-style G3000/G11H18 cast iron specifications and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware is designed to restore proper caliper movement and spring tension. For Volkswagen Jetta rear brake replacement, part number 4512-74110 provides a matched set of components for the listed applications.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness during stop-and-go driving
- Corroded or fatigued brake hardware
Installation Notes and Tips
Verify rear rotor configuration before ordering, since this kit is listed for vented rear rotors on the covered Volkswagen Jetta applications. Clean the hub surface before installation, inspect caliper slides and mounting points, and follow the vehicle manufacturer’s brake service procedure. Proper bedding-in after installation helps promote even pad transfer and consistent pedal feel.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function. Part number 4512-74110 is built for dependable rear brake service on the listed Volkswagen Jetta fitments.
Rear Brake Kit for Volkswagen Jetta
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Volkswagen Jetta applications. Part number 4512-74110 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Compatible with 2004 Volkswagen Jetta rear and 2005 Volkswagen Jetta rear with production date from 1/05 to 11/05, this kit is aimed at drivers looking for OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Rear disc brake kit for select Volkswagen Jetta models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-74110
Product Details
DFC Complete Brake Kits are packaged to simplify rear brake service by combining the rotor, pad, and hardware components needed for the job. The GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. They are built to OEM-style G3000/G11H18 cast iron specifications and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware is designed to restore proper caliper movement and spring tension. For Volkswagen Jetta rear brake replacement, part number 4512-74110 provides a matched set of components for the listed applications.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness during stop-and-go driving
- Corroded or fatigued brake hardware
Installation Notes and Tips
Verify rear rotor configuration before ordering, since this kit is listed for vented rear rotors on the covered Volkswagen Jetta applications. Clean the hub surface before installation, inspect caliper slides and mounting points, and follow the vehicle manufacturer’s brake service procedure. Proper bedding-in after installation helps promote even pad transfer and consistent pedal feel.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function. Part number 4512-74110 is built for dependable rear brake service on the listed Volkswagen Jetta fitments.
Original: $136.81
-65%$136.81
$47.88Description
Rear Brake Kit for Volkswagen Jetta
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Volkswagen Jetta applications. Part number 4512-74110 combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake refresh.
Compatible with 2004 Volkswagen Jetta rear and 2005 Volkswagen Jetta rear with production date from 1/05 to 11/05, this kit is aimed at drivers looking for OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Rear disc brake kit for select Volkswagen Jetta models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-74110
Product Details
DFC Complete Brake Kits are packaged to simplify rear brake service by combining the rotor, pad, and hardware components needed for the job. The GEOSPEC rotors are machined to tight tolerances, processed dry, and ready to install without additional cleaning. They are built to OEM-style G3000/G11H18 cast iron specifications and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and quieter operation, while the included hardware is designed to restore proper caliper movement and spring tension. For Volkswagen Jetta rear brake replacement, part number 4512-74110 provides a matched set of components for the listed applications.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking smoothness during stop-and-go driving
- Corroded or fatigued brake hardware
Installation Notes and Tips
Verify rear rotor configuration before ordering, since this kit is listed for vented rear rotors on the covered Volkswagen Jetta applications. Clean the hub surface before installation, inspect caliper slides and mounting points, and follow the vehicle manufacturer’s brake service procedure. Proper bedding-in after installation helps promote even pad transfer and consistent pedal feel.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function. Part number 4512-74110 is built for dependable rear brake service on the listed Volkswagen Jetta fitments.
