Dynamite Friction 4512-74098 Disc Brake Kit - Front
Front Brake Kit for Volkswagen Jetta
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74098, is a front disc brake kit built for 1998-1999 Volkswagen Jetta applications. It combines coated rotors, ceramic brake pads, and matching brake hardware in one service package for a cleaner brake job and OE-style fitment.
For drivers searching for a 1999 Volkswagen Jetta front brake kit or a 1998 Volkswagen Jetta front rotor and pad kit, this assembly is built around the exact axle requirements listed below. The 4512-74098 kit is also a practical choice for Volkswagen Jetta front brake service where corrosion resistance, pad stability, and quieter operation matter.
- Fits 1999 Volkswagen Jetta, front, 288mm front rotors
- Fits 1998 Volkswagen Jetta, front, to chassis number 9M-Y-012-499
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and stronger initial bite
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit included in the complete brake service package
Product Line Details
DFC GEOSPEC rotors are coated and shipped dry, so they are ready for installation without cleaning off oil residue. The rotor design uses G3000/G11H18 cast iron, tight machining tolerances, and balance correction on vented rotors to support stable braking performance. The 5000 Advanced pad line is formulated for consistent friction across a range of vehicle applications, including passenger cars and light trucks.
Common Brake Service Problems This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Rust buildup on uncoated rotors
- Uneven pad wear caused by aged hardware components
- Longer stopping distances from worn friction surfaces
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Confirm the vehicle’s front axle configuration before ordering, especially on 1998 Volkswagen Jetta models with chassis-number-specific fitment. Inspect calipers, slides, and hub surfaces during service, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. The dry-coated rotors are ready to install as supplied.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and built to OE specifications. Vented rotors are electronically mill-balanced when needed, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-74098 is engineered as a complete front brake service solution for Volkswagen Jetta applications.
Front Brake Kit for Volkswagen Jetta
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74098, is a front disc brake kit built for 1998-1999 Volkswagen Jetta applications. It combines coated rotors, ceramic brake pads, and matching brake hardware in one service package for a cleaner brake job and OE-style fitment.
For drivers searching for a 1999 Volkswagen Jetta front brake kit or a 1998 Volkswagen Jetta front rotor and pad kit, this assembly is built around the exact axle requirements listed below. The 4512-74098 kit is also a practical choice for Volkswagen Jetta front brake service where corrosion resistance, pad stability, and quieter operation matter.
- Fits 1999 Volkswagen Jetta, front, 288mm front rotors
- Fits 1998 Volkswagen Jetta, front, to chassis number 9M-Y-012-499
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and stronger initial bite
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit included in the complete brake service package
Product Line Details
DFC GEOSPEC rotors are coated and shipped dry, so they are ready for installation without cleaning off oil residue. The rotor design uses G3000/G11H18 cast iron, tight machining tolerances, and balance correction on vented rotors to support stable braking performance. The 5000 Advanced pad line is formulated for consistent friction across a range of vehicle applications, including passenger cars and light trucks.
Common Brake Service Problems This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Rust buildup on uncoated rotors
- Uneven pad wear caused by aged hardware components
- Longer stopping distances from worn friction surfaces
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Confirm the vehicle’s front axle configuration before ordering, especially on 1998 Volkswagen Jetta models with chassis-number-specific fitment. Inspect calipers, slides, and hub surfaces during service, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. The dry-coated rotors are ready to install as supplied.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and built to OE specifications. Vented rotors are electronically mill-balanced when needed, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-74098 is engineered as a complete front brake service solution for Volkswagen Jetta applications.
Original: $228.56
-65%$228.56
$80.00Description
Front Brake Kit for Volkswagen Jetta
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74098, is a front disc brake kit built for 1998-1999 Volkswagen Jetta applications. It combines coated rotors, ceramic brake pads, and matching brake hardware in one service package for a cleaner brake job and OE-style fitment.
For drivers searching for a 1999 Volkswagen Jetta front brake kit or a 1998 Volkswagen Jetta front rotor and pad kit, this assembly is built around the exact axle requirements listed below. The 4512-74098 kit is also a practical choice for Volkswagen Jetta front brake service where corrosion resistance, pad stability, and quieter operation matter.
- Fits 1999 Volkswagen Jetta, front, 288mm front rotors
- Fits 1998 Volkswagen Jetta, front, to chassis number 9M-Y-012-499
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and stronger initial bite
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- Hardware kit included in the complete brake service package
Product Line Details
DFC GEOSPEC rotors are coated and shipped dry, so they are ready for installation without cleaning off oil residue. The rotor design uses G3000/G11H18 cast iron, tight machining tolerances, and balance correction on vented rotors to support stable braking performance. The 5000 Advanced pad line is formulated for consistent friction across a range of vehicle applications, including passenger cars and light trucks.
Common Brake Service Problems This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Rust buildup on uncoated rotors
- Uneven pad wear caused by aged hardware components
- Longer stopping distances from worn friction surfaces
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Confirm the vehicle’s front axle configuration before ordering, especially on 1998 Volkswagen Jetta models with chassis-number-specific fitment. Inspect calipers, slides, and hub surfaces during service, and follow proper bedding procedures after installation to help the pads and rotors seat evenly. The dry-coated rotors are ready to install as supplied.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and built to OE specifications. Vented rotors are electronically mill-balanced when needed, and the rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-74098 is engineered as a complete front brake service solution for Volkswagen Jetta applications.
